TY  - JOUR
AU  - Drobnjak, Siniša
AU  - Radojčić, Stevan
AU  - Božić, Branko
PY  - 2014
UR  - https://grafar.grf.bg.ac.rs/handle/123456789/558
AB  - Standardization in the field of geographical information related to the definition of the system of collection, preparation, storage, maintenance, presentation and sharing of geographic information. Quality information of available spatial data are vital in the process of selecting a dataset where data value is directly related to its quality. Users of spatial data can choose data from multiple datasets. Therefore. It is necessary to compare the quality of datasets and determine which best meet customer requirements. Digital topographic maps for its visuality, brevity and easy of use have a big advantage over other spatial datasets and is therefore fully justified request for the development of the system of determining, evaluating and impart their quality. The main objective of this paper is to describe the possibilities of application of ISO 19157 'Geographic information - Data quality' standard in technological process of the production of digital topographic maps.
AB  - Standardizacija u oblasti geografskih informacija odnosi se na definisanje sistema prikupljanja, izrade, čuvanja, održavanja, prezentacije i razmene geografskih informacija. Informacije o kvalitetu raspoloživih prostornih podataka od vitalnog su značaja za proces odabira skupa podataka gde je vrednost podataka direktno povezana s njenim kvalitetom. Korisnik prostornih podataka može birati podatke iz više skupova podataka. Zbog toga, neophodno je da se uporedi kvalitet skupova podataka i odredi koji najbolje ispunjavaju zahteve korisnika. Digitalne topografske karte zbog svoje vizuelnosti, sažetosti i jednostavnosti korišćenja imaju velike prednosti nad drugim skupovima prostornih podataka i zbog toga u potpunosti su opravdani zahtevi za razradu sistema utvrđivanja, vrednovanja i saopštavanja njihovog kvaliteta. Osnovni cilj rada je da opiše mogućnosti primene ISO 19157 'Geografske informacije - kvalitet podataka' standarda u tehnološkom procesu izrade digitalnih topografskih karata.
PB  - Savez inženjera i tehničara Srbije, Beograd
T2  - Tehnika
T1  - ISO 19157 standard application in technological process of the production of digital topographic maps
T1  - Primena ISO 19157 standarda u tehnološkom procesu izrade digitalnih topografskih karata
EP  - 937
IS  - 6
SP  - 931
VL  - 69
DO  - 10.5937/tehnika1406931D
ER  - 

@article{
author = "Drobnjak, Siniša and Radojčić, Stevan and Božić, Branko",
year = "2014",
abstract = "Standardization in the field of geographical information related to the definition of the system of collection, preparation, storage, maintenance, presentation and sharing of geographic information. Quality information of available spatial data are vital in the process of selecting a dataset where data value is directly related to its quality. Users of spatial data can choose data from multiple datasets. Therefore. It is necessary to compare the quality of datasets and determine which best meet customer requirements. Digital topographic maps for its visuality, brevity and easy of use have a big advantage over other spatial datasets and is therefore fully justified request for the development of the system of determining, evaluating and impart their quality. The main objective of this paper is to describe the possibilities of application of ISO 19157 'Geographic information - Data quality' standard in technological process of the production of digital topographic maps., Standardizacija u oblasti geografskih informacija odnosi se na definisanje sistema prikupljanja, izrade, čuvanja, održavanja, prezentacije i razmene geografskih informacija. Informacije o kvalitetu raspoloživih prostornih podataka od vitalnog su značaja za proces odabira skupa podataka gde je vrednost podataka direktno povezana s njenim kvalitetom. Korisnik prostornih podataka može birati podatke iz više skupova podataka. Zbog toga, neophodno je da se uporedi kvalitet skupova podataka i odredi koji najbolje ispunjavaju zahteve korisnika. Digitalne topografske karte zbog svoje vizuelnosti, sažetosti i jednostavnosti korišćenja imaju velike prednosti nad drugim skupovima prostornih podataka i zbog toga u potpunosti su opravdani zahtevi za razradu sistema utvrđivanja, vrednovanja i saopštavanja njihovog kvaliteta. Osnovni cilj rada je da opiše mogućnosti primene ISO 19157 'Geografske informacije - kvalitet podataka' standarda u tehnološkom procesu izrade digitalnih topografskih karata.",
publisher = "Savez inženjera i tehničara Srbije, Beograd",
journal = "Tehnika",
title = "ISO 19157 standard application in technological process of the production of digital topographic maps, Primena ISO 19157 standarda u tehnološkom procesu izrade digitalnih topografskih karata",
pages = "937-931",
number = "6",
volume = "69",
doi = "10.5937/tehnika1406931D"
}

Drobnjak, S., Radojčić, S.,& Božić, B.. (2014). ISO 19157 standard application in technological process of the production of digital topographic maps. in Tehnika
Savez inženjera i tehničara Srbije, Beograd., 69(6), 931-937.
https://doi.org/10.5937/tehnika1406931D

Drobnjak S, Radojčić S, Božić B. ISO 19157 standard application in technological process of the production of digital topographic maps. in Tehnika. 2014;69(6):931-937.
doi:10.5937/tehnika1406931D .

Drobnjak, Siniša, Radojčić, Stevan, Božić, Branko, "ISO 19157 standard application in technological process of the production of digital topographic maps" in Tehnika, 69, no. 6 (2014):931-937,
https://doi.org/10.5937/tehnika1406931D . .

TY  - JOUR
AU  - Radojčić, Stevan
AU  - Borisov, Mirko
AU  - Božić, Branko
PY  - 2011
UR  - https://grafar.grf.bg.ac.rs/handle/123456789/382
AB  - Positional accuracy is important quantity element of quality of geographical information in digital as well as in analoguos form. This paper points to importance and necessity of evaluation of positional accuracy in recent conditions, describes two modern standards for positional accuracy evaluation and shows the results of its implementation on raster topographic map at scale 1:50.000 made by Military Geographical Institute.
AB  - Položajna (geometrijska) tačnost geografskih informacija je važan kvantitativni element njihovog kvaliteta, nezavisno od toga da li su one u digitalnom ili analognom obliku. U radu se ukazuje na značaj i potrebu ocenjivanja položajne tačnosti geografskih informacija u savremenim uslovima, opisuju dva aktuelna standarda za ocenjivanje tačnosti i prikazuju rezultati njihove primene na rasterskoj topografskoj karti Vojnogeografskog instituta u razmeru 1: 50.000.
PB  - Srpsko geografsko društvo, Beograd
T2  - Glasnik Srpskog geografskog društva
T1  - Positional accuracy of geographical information and recent standards for its evaluation
T1  - Položajna tačnost geografskih informacija i savremeni standardi za njeno ocenjivanje
EP  - 112
IS  - 2
SP  - 99
VL  - 91
DO  - 10.2298/GSGD1102099R
ER  - 

@article{
author = "Radojčić, Stevan and Borisov, Mirko and Božić, Branko",
year = "2011",
abstract = "Positional accuracy is important quantity element of quality of geographical information in digital as well as in analoguos form. This paper points to importance and necessity of evaluation of positional accuracy in recent conditions, describes two modern standards for positional accuracy evaluation and shows the results of its implementation on raster topographic map at scale 1:50.000 made by Military Geographical Institute., Položajna (geometrijska) tačnost geografskih informacija je važan kvantitativni element njihovog kvaliteta, nezavisno od toga da li su one u digitalnom ili analognom obliku. U radu se ukazuje na značaj i potrebu ocenjivanja položajne tačnosti geografskih informacija u savremenim uslovima, opisuju dva aktuelna standarda za ocenjivanje tačnosti i prikazuju rezultati njihove primene na rasterskoj topografskoj karti Vojnogeografskog instituta u razmeru 1: 50.000.",
publisher = "Srpsko geografsko društvo, Beograd",
journal = "Glasnik Srpskog geografskog društva",
title = "Positional accuracy of geographical information and recent standards for its evaluation, Položajna tačnost geografskih informacija i savremeni standardi za njeno ocenjivanje",
pages = "112-99",
number = "2",
volume = "91",
doi = "10.2298/GSGD1102099R"
}

Radojčić, S., Borisov, M.,& Božić, B.. (2011). Positional accuracy of geographical information and recent standards for its evaluation. in Glasnik Srpskog geografskog društva
Srpsko geografsko društvo, Beograd., 91(2), 99-112.
https://doi.org/10.2298/GSGD1102099R

Radojčić S, Borisov M, Božić B. Positional accuracy of geographical information and recent standards for its evaluation. in Glasnik Srpskog geografskog društva. 2011;91(2):99-112.
doi:10.2298/GSGD1102099R .

Radojčić, Stevan, Borisov, Mirko, Božić, Branko, "Positional accuracy of geographical information and recent standards for its evaluation" in Glasnik Srpskog geografskog društva, 91, no. 2 (2011):99-112,
https://doi.org/10.2298/GSGD1102099R . .

TY  - JOUR
AU  - Božić, Branko
AU  - Radojčić, Stevan
PY  - 2011
UR  - https://grafar.grf.bg.ac.rs/handle/123456789/415
AB  - The paper describes the methodology used for the assessment of the horizontal accuracy of digital topographic maps at a scale oft: 50 000 produced by the Serbian Military Geographic Institute and reviews the results. The test for the horizontal accuracy compliance of a map sheet is done by comparing the planimetric coordinates of the ground points to the coordinates of the same points as determined by a horizontal check survey of higher accuracy with standard deviations equal or less than one-third of the limiting error selected for the map. In this research two standards were used and the methodology of their use is discussed in detail. Special attention was not paid to the map design but to the quality of the map assurance, using verified scientific approaches. The result obtained from this research confirmed the chosen approach and showed very good results for the digital topographic maps produced by the Serbian Military Geographic Institute. The suggested methodology may be also used for the assessment of digital topographic maps at other scales
T2  - Survey Review
T1  - Horizontal accuracy of 1:50 000 digital topographic maps
EP  - 104
IS  - 319
SP  - 94
VL  - 43
DO  - 10.1179/003962611X12894696204740
ER  - 

@article{
author = "Božić, Branko and Radojčić, Stevan",
year = "2011",
abstract = "The paper describes the methodology used for the assessment of the horizontal accuracy of digital topographic maps at a scale oft: 50 000 produced by the Serbian Military Geographic Institute and reviews the results. The test for the horizontal accuracy compliance of a map sheet is done by comparing the planimetric coordinates of the ground points to the coordinates of the same points as determined by a horizontal check survey of higher accuracy with standard deviations equal or less than one-third of the limiting error selected for the map. In this research two standards were used and the methodology of their use is discussed in detail. Special attention was not paid to the map design but to the quality of the map assurance, using verified scientific approaches. The result obtained from this research confirmed the chosen approach and showed very good results for the digital topographic maps produced by the Serbian Military Geographic Institute. The suggested methodology may be also used for the assessment of digital topographic maps at other scales",
journal = "Survey Review",
title = "Horizontal accuracy of 1:50 000 digital topographic maps",
pages = "104-94",
number = "319",
volume = "43",
doi = "10.1179/003962611X12894696204740"
}

Božić, B.,& Radojčić, S.. (2011). Horizontal accuracy of 1:50 000 digital topographic maps. in Survey Review, 43(319), 94-104.
https://doi.org/10.1179/003962611X12894696204740

Božić B, Radojčić S. Horizontal accuracy of 1:50 000 digital topographic maps. in Survey Review. 2011;43(319):94-104.
doi:10.1179/003962611X12894696204740 .

Božić, Branko, Radojčić, Stevan, "Horizontal accuracy of 1:50 000 digital topographic maps" in Survey Review, 43, no. 319 (2011):94-104,
https://doi.org/10.1179/003962611X12894696204740 . .

TY  - JOUR
AU  - Radojčić, Stevan
AU  - Božić, Branko
PY  - 2010
UR  - https://grafar.grf.bg.ac.rs/handle/123456789/340
AB  - This paper describes measurements and shows the results of the first GPS campaign taken in Serbia, realized by Military Geographical Institute from Belgrade in July 1990, within its Experimental geodetic network. As a matter of fact, the Military Geographical Institute obtained its first GPS measurements nearby its building in March 1990, during the training with WM102 receivers, but the EPVGI90 campaign was the first 'real' geodetic task accomplished by GPS technology in Serbia.
AB  - U radu su opisana merenja i prikazani rezultati prve GPS kampanje u Srbiji, koju je krajem jula 1990. godine preduzeo Vojnogeografski institut iz Beograda na svom Eksperimentalnom poligonu. Formalno uzevši, prva GPS merenja u Srbiji Vojnogeografski institut je izvršio u krugu oko svoje zgrade još u martu iste godine, ali u okviru obuke za rad sa tek nabavljenim dvofrekvencijskim GPS prijemnicima WM102 koji su korišćeni u kampanji EPVGI90. Kampanja EPVGI90 je bila prvi 'pravi' geodetski zadatak realizovan korišćenjem GPS tehnologije.
PB  - Savez inženjera i tehničara Srbije, Beograd
T2  - Tehnika - Naše građevinarstvo
T1  - Twenty years from the first GPS measurements in Serbia: Campaign EPVGI90
T1  - 20 godina od prvih GPS merenja u Srbiji - kampanja EPVGI90
EP  - 19
IS  - 5
SP  - 15
VL  - 64
UR  - https://hdl.handle.net/21.15107/rcub_grafar_340
ER  - 

@article{
author = "Radojčić, Stevan and Božić, Branko",
year = "2010",
abstract = "This paper describes measurements and shows the results of the first GPS campaign taken in Serbia, realized by Military Geographical Institute from Belgrade in July 1990, within its Experimental geodetic network. As a matter of fact, the Military Geographical Institute obtained its first GPS measurements nearby its building in March 1990, during the training with WM102 receivers, but the EPVGI90 campaign was the first 'real' geodetic task accomplished by GPS technology in Serbia., U radu su opisana merenja i prikazani rezultati prve GPS kampanje u Srbiji, koju je krajem jula 1990. godine preduzeo Vojnogeografski institut iz Beograda na svom Eksperimentalnom poligonu. Formalno uzevši, prva GPS merenja u Srbiji Vojnogeografski institut je izvršio u krugu oko svoje zgrade još u martu iste godine, ali u okviru obuke za rad sa tek nabavljenim dvofrekvencijskim GPS prijemnicima WM102 koji su korišćeni u kampanji EPVGI90. Kampanja EPVGI90 je bila prvi 'pravi' geodetski zadatak realizovan korišćenjem GPS tehnologije.",
publisher = "Savez inženjera i tehničara Srbije, Beograd",
journal = "Tehnika - Naše građevinarstvo",
title = "Twenty years from the first GPS measurements in Serbia: Campaign EPVGI90, 20 godina od prvih GPS merenja u Srbiji - kampanja EPVGI90",
pages = "19-15",
number = "5",
volume = "64",
url = "https://hdl.handle.net/21.15107/rcub_grafar_340"
}

Radojčić, S.,& Božić, B.. (2010). Twenty years from the first GPS measurements in Serbia: Campaign EPVGI90. in Tehnika - Naše građevinarstvo
Savez inženjera i tehničara Srbije, Beograd., 64(5), 15-19.
https://hdl.handle.net/21.15107/rcub_grafar_340

Radojčić S, Božić B. Twenty years from the first GPS measurements in Serbia: Campaign EPVGI90. in Tehnika - Naše građevinarstvo. 2010;64(5):15-19.
https://hdl.handle.net/21.15107/rcub_grafar_340 .

Radojčić, Stevan, Božić, Branko, "Twenty years from the first GPS measurements in Serbia: Campaign EPVGI90" in Tehnika - Naše građevinarstvo, 64, no. 5 (2010):15-19,
https://hdl.handle.net/21.15107/rcub_grafar_340 .

TY  - JOUR
AU  - Božić, Branko
AU  - Radojčić, Stevan
PY  - 2009
UR  - https://grafar.grf.bg.ac.rs/handle/123456789/236
AB  - This paper describes methodology used for assessment the horizontal positional accuracy of Digital topographic map in scale 1: 50 000 produced by Military Geographical Institute, and gives review of obtained results. Two standards were used, and for one of them (which is more appropriate for appliance in our conditions) the methodology and preliminary estimate of costs are elaborated, for single sheet and for whole map, as well. The suggested methodology may be used for the assessment of another digital topographic maps (in different scale) made by Military Geographical Institute.
AB  - U radu je opisana metodologija ispitivanja i ocenjivanja horizontalne položajne tačnosti Digitalne topografske karte razmera 1: 50 000 u izdanju Vojnogeografskog instituta i dat pregled dobijenih rezultata. Korišćena su dva standarda, a za jedan čija je primena ocenjena kao prihvatljivija u našim uslovima, razrađen je premer radova i dat odgovarajući proračun troškova ocenjivanja, za jedan list i za kartu u celini. Predložena metodologija se može primeniti i na druge digitalne topografske karte u izdanju Vojnogeografskog instituta.
PB  - Savez inženjera i tehničara Srbije, Beograd
T2  - Tehnika - Naše građevinarstvo
T1  - The analysis of horizontal positional accuracy of the Digital topographic map 1:50 000 produced by Military Geographical Institute
T1  - Analiza horizontalne položajne tačnosti Digitalne topografske karte 1:50 000 izdanja Vojnogeografskog instituta
EP  - 7
IS  - 2
SP  - 1
VL  - 63
UR  - https://hdl.handle.net/21.15107/rcub_grafar_236
ER  - 

@article{
author = "Božić, Branko and Radojčić, Stevan",
year = "2009",
abstract = "This paper describes methodology used for assessment the horizontal positional accuracy of Digital topographic map in scale 1: 50 000 produced by Military Geographical Institute, and gives review of obtained results. Two standards were used, and for one of them (which is more appropriate for appliance in our conditions) the methodology and preliminary estimate of costs are elaborated, for single sheet and for whole map, as well. The suggested methodology may be used for the assessment of another digital topographic maps (in different scale) made by Military Geographical Institute., U radu je opisana metodologija ispitivanja i ocenjivanja horizontalne položajne tačnosti Digitalne topografske karte razmera 1: 50 000 u izdanju Vojnogeografskog instituta i dat pregled dobijenih rezultata. Korišćena su dva standarda, a za jedan čija je primena ocenjena kao prihvatljivija u našim uslovima, razrađen je premer radova i dat odgovarajući proračun troškova ocenjivanja, za jedan list i za kartu u celini. Predložena metodologija se može primeniti i na druge digitalne topografske karte u izdanju Vojnogeografskog instituta.",
publisher = "Savez inženjera i tehničara Srbije, Beograd",
journal = "Tehnika - Naše građevinarstvo",
title = "The analysis of horizontal positional accuracy of the Digital topographic map 1:50 000 produced by Military Geographical Institute, Analiza horizontalne položajne tačnosti Digitalne topografske karte 1:50 000 izdanja Vojnogeografskog instituta",
pages = "7-1",
number = "2",
volume = "63",
url = "https://hdl.handle.net/21.15107/rcub_grafar_236"
}

Božić, B.,& Radojčić, S.. (2009). The analysis of horizontal positional accuracy of the Digital topographic map 1:50 000 produced by Military Geographical Institute. in Tehnika - Naše građevinarstvo
Savez inženjera i tehničara Srbije, Beograd., 63(2), 1-7.
https://hdl.handle.net/21.15107/rcub_grafar_236

Božić B, Radojčić S. The analysis of horizontal positional accuracy of the Digital topographic map 1:50 000 produced by Military Geographical Institute. in Tehnika - Naše građevinarstvo. 2009;63(2):1-7.
https://hdl.handle.net/21.15107/rcub_grafar_236 .

Božić, Branko, Radojčić, Stevan, "The analysis of horizontal positional accuracy of the Digital topographic map 1:50 000 produced by Military Geographical Institute" in Tehnika - Naše građevinarstvo, 63, no. 2 (2009):1-7,
https://hdl.handle.net/21.15107/rcub_grafar_236 .