TY  - CONF
AU  - Butenweg, Christoph
AU  - Marinković, Marko
AU  - Pavese, Alberto
AU  - Lanese, Igor
AU  - Parisi, Ernesto
AU  - Hoffmeister, Benno
AU  - Pinkawa, Marius
AU  - Vulcu, Christian
AU  - Bursi, Oreste
AU  - Nardin, Chiara
AU  - Paolacci, Fabrizio
AU  - Quinci, Gianluca
AU  - Fragiadakis, Michalis
AU  - Weber, Felix
AU  - Huber, Peter
AU  - Renault, Philippe
AU  - Gündel, Max
AU  - Dyke, Shirley
AU  - Ciuccu, M.
AU  - Marino, A.
PY  - 2020
UR  - https://grafar.grf.bg.ac.rs/handle/123456789/2234
AB  - Past earthquakes demonstrated the high vulnerability of industrial facilities equipped with complex process technologies leading to serious damage of the process equipment and multiple and simultaneous release of hazardous substances in industrial facilities. Nevertheless, the design of industrial plants is inadequately described in recent codes and guidelines, as they do not consider the dynamic interaction between the structure and the installations and thus the effect of seismic response of the installations on the response of the structure and vice versa. The current code-based approach for the seismic design of industrial facilities is considered not enough for ensure proper safety conditions against exceptional event entailing loss of content and related consequences. Accordingly, SPIF project (Seismic Performance of Multi- Component Systems in Special Risk Industrial Facilities) was proposed within the framework of the European H2020 - SERA funding scheme (Seismology and Earthquake Engineering Research Infrastructure Alliance for Europe). The objective of the SPIF project is the investigation of the seismic behavior of a representative industrial structure equipped with complex process technology by means of shaking table tests. The test structure is a three-story moment resisting steel frame with vertical and horizontal vessels and cabinets, arranged on the three levels and connected by pipes. The dynamic behavior of the test structure and installations is investigated with and without base isolation. Furthermore, both firmly anchored and isolated components are taken into account to compare their dynamic behavior and interactions with each other. Artificial and synthetic ground motions are applied to study the seismic response at different PGA levels. After each test, dynamic identification measurements are carried out to characterize the system condition. The contribution presents the numerical simulations to calibrate the tests on the prototype, the experimental setup of the investigated structure and installations, selected measurement data and finally describes preliminary experimental results.
C3  - 17th World Conference on Earthquake Engineering
T1  - Seismic performance of multiple-component systems in special risk industrial facilities
UR  - https://hdl.handle.net/21.15107/rcub_grafar_2234
ER  - 

@conference{
author = "Butenweg, Christoph and Marinković, Marko and Pavese, Alberto and Lanese, Igor and Parisi, Ernesto and Hoffmeister, Benno and Pinkawa, Marius and Vulcu, Christian and Bursi, Oreste and Nardin, Chiara and Paolacci, Fabrizio and Quinci, Gianluca and Fragiadakis, Michalis and Weber, Felix and Huber, Peter and Renault, Philippe and Gündel, Max and Dyke, Shirley and Ciuccu, M. and Marino, A.",
year = "2020",
abstract = "Past earthquakes demonstrated the high vulnerability of industrial facilities equipped with complex process technologies leading to serious damage of the process equipment and multiple and simultaneous release of hazardous substances in industrial facilities. Nevertheless, the design of industrial plants is inadequately described in recent codes and guidelines, as they do not consider the dynamic interaction between the structure and the installations and thus the effect of seismic response of the installations on the response of the structure and vice versa. The current code-based approach for the seismic design of industrial facilities is considered not enough for ensure proper safety conditions against exceptional event entailing loss of content and related consequences. Accordingly, SPIF project (Seismic Performance of Multi- Component Systems in Special Risk Industrial Facilities) was proposed within the framework of the European H2020 - SERA funding scheme (Seismology and Earthquake Engineering Research Infrastructure Alliance for Europe). The objective of the SPIF project is the investigation of the seismic behavior of a representative industrial structure equipped with complex process technology by means of shaking table tests. The test structure is a three-story moment resisting steel frame with vertical and horizontal vessels and cabinets, arranged on the three levels and connected by pipes. The dynamic behavior of the test structure and installations is investigated with and without base isolation. Furthermore, both firmly anchored and isolated components are taken into account to compare their dynamic behavior and interactions with each other. Artificial and synthetic ground motions are applied to study the seismic response at different PGA levels. After each test, dynamic identification measurements are carried out to characterize the system condition. The contribution presents the numerical simulations to calibrate the tests on the prototype, the experimental setup of the investigated structure and installations, selected measurement data and finally describes preliminary experimental results.",
journal = "17th World Conference on Earthquake Engineering",
title = "Seismic performance of multiple-component systems in special risk industrial facilities",
url = "https://hdl.handle.net/21.15107/rcub_grafar_2234"
}

Butenweg, C., Marinković, M., Pavese, A., Lanese, I., Parisi, E., Hoffmeister, B., Pinkawa, M., Vulcu, C., Bursi, O., Nardin, C., Paolacci, F., Quinci, G., Fragiadakis, M., Weber, F., Huber, P., Renault, P., Gündel, M., Dyke, S., Ciuccu, M.,& Marino, A.. (2020). Seismic performance of multiple-component systems in special risk industrial facilities. in 17th World Conference on Earthquake Engineering.
https://hdl.handle.net/21.15107/rcub_grafar_2234

Butenweg C, Marinković M, Pavese A, Lanese I, Parisi E, Hoffmeister B, Pinkawa M, Vulcu C, Bursi O, Nardin C, Paolacci F, Quinci G, Fragiadakis M, Weber F, Huber P, Renault P, Gündel M, Dyke S, Ciuccu M, Marino A. Seismic performance of multiple-component systems in special risk industrial facilities. in 17th World Conference on Earthquake Engineering. 2020;.
https://hdl.handle.net/21.15107/rcub_grafar_2234 .

Butenweg, Christoph, Marinković, Marko, Pavese, Alberto, Lanese, Igor, Parisi, Ernesto, Hoffmeister, Benno, Pinkawa, Marius, Vulcu, Christian, Bursi, Oreste, Nardin, Chiara, Paolacci, Fabrizio, Quinci, Gianluca, Fragiadakis, Michalis, Weber, Felix, Huber, Peter, Renault, Philippe, Gündel, Max, Dyke, Shirley, Ciuccu, M., Marino, A., "Seismic performance of multiple-component systems in special risk industrial facilities" in 17th World Conference on Earthquake Engineering (2020),
https://hdl.handle.net/21.15107/rcub_grafar_2234 .