TY  - CONF
AU  - Marinković, Dejan
AU  - Ivanović, Marija
AU  - Petronijević, Predrag
PY  - 2023
UR  - https://grafar.grf.bg.ac.rs/handle/123456789/3245
AB  - Produktivnost predstavlja jedan od ključnih indikatora građevinske proizvodnje, kao i
faktor koji bitno utiče na visinu nepotrebnih troškova. Unapređenjem produktivnosti
stvaraju se preduslovi za smanjenje proizvodne cene, ostvarivanje visokog profita i
povećanje konkurentnosti firme. Zbog angažovanja velikog broja različitih resursa,
kontrola produktivnosti na građevinskim projektima je otežana, često zakasnela i
neefikasna. U radu je predložen pristup za identifikaciju ključnih resursa, koji mogu bitno
uticati na visinu produktivnosti na projektima. Na taj način stvaraju se preduslovi za
fokusiranu kontrolu, pre svega ključnih resursa, gde su greške najskuplje i gde treba
delovati preventivno, ciljano i efikasno. Predloženi pristup podržava lean principe. U radu
su analizirane najčešće korišćene metode za merenje produktivnosti i date su preporuke
za njihovu primenu na ključnim resursima, sa ciljem unapređenja poslovanja.
C3  - 16. međunarodna naučna konferencija ''Planiranje, projektovanje, izvođenje i obnova graditeljstva INDiS 2023'', 2023
T1  - Kontrola produktivnosti na građevinskim projekatima zasnovana na ključnim resursima
UR  - https://hdl.handle.net/21.15107/rcub_grafar_3245
ER  - 

@conference{
author = "Marinković, Dejan and Ivanović, Marija and Petronijević, Predrag",
year = "2023",
abstract = "Produktivnost predstavlja jedan od ključnih indikatora građevinske proizvodnje, kao i
faktor koji bitno utiče na visinu nepotrebnih troškova. Unapređenjem produktivnosti
stvaraju se preduslovi za smanjenje proizvodne cene, ostvarivanje visokog profita i
povećanje konkurentnosti firme. Zbog angažovanja velikog broja različitih resursa,
kontrola produktivnosti na građevinskim projektima je otežana, često zakasnela i
neefikasna. U radu je predložen pristup za identifikaciju ključnih resursa, koji mogu bitno
uticati na visinu produktivnosti na projektima. Na taj način stvaraju se preduslovi za
fokusiranu kontrolu, pre svega ključnih resursa, gde su greške najskuplje i gde treba
delovati preventivno, ciljano i efikasno. Predloženi pristup podržava lean principe. U radu
su analizirane najčešće korišćene metode za merenje produktivnosti i date su preporuke
za njihovu primenu na ključnim resursima, sa ciljem unapređenja poslovanja.",
journal = "16. međunarodna naučna konferencija ''Planiranje, projektovanje, izvođenje i obnova graditeljstva INDiS 2023'', 2023",
title = "Kontrola produktivnosti na građevinskim projekatima zasnovana na ključnim resursima",
url = "https://hdl.handle.net/21.15107/rcub_grafar_3245"
}

Marinković, D., Ivanović, M.,& Petronijević, P.. (2023). Kontrola produktivnosti na građevinskim projekatima zasnovana na ključnim resursima. in 16. međunarodna naučna konferencija ''Planiranje, projektovanje, izvođenje i obnova graditeljstva INDiS 2023'', 2023.
https://hdl.handle.net/21.15107/rcub_grafar_3245

Marinković D, Ivanović M, Petronijević P. Kontrola produktivnosti na građevinskim projekatima zasnovana na ključnim resursima. in 16. međunarodna naučna konferencija ''Planiranje, projektovanje, izvođenje i obnova graditeljstva INDiS 2023'', 2023. 2023;.
https://hdl.handle.net/21.15107/rcub_grafar_3245 .

Marinković, Dejan, Ivanović, Marija, Petronijević, Predrag, "Kontrola produktivnosti na građevinskim projekatima zasnovana na ključnim resursima" in 16. međunarodna naučna konferencija ''Planiranje, projektovanje, izvođenje i obnova graditeljstva INDiS 2023'', 2023 (2023),
https://hdl.handle.net/21.15107/rcub_grafar_3245 .

TY  - CONF
AU  - Simić, Nevena
AU  - Petronijević, Predrag
AU  - Devedžić, Aleksandar
AU  - Ivanović, Marija
PY  - 2022
UR  - https://grafar.grf.bg.ac.rs/handle/123456789/3223
AB  - This paper analyses the problem of estimating the required quantities of major work items in the construction of residential and residential-commercial buildings using machine learning algorithms. The goal is to form a model that will provide a fast and sufficiently accurate estimate of the quantities of major work items, based on a small amount of known information on the technical characteristics and the environment of future residential and residential-commercial buildings. The case study included 71 projects of residential and residential-commercial buildings construction realised on the territory of the Republic of Serbia. Several models have been developed, and the paper presents those models that had the best performances. The models developed in this way can significantly contribute to resource planning and the accuracy of cost estimates in the early project phases.
C3  - STEPGRAD2022 - Proceedings of International conference on Contemporary Theory and Practice in Construction XV
T1  - Preliminary quantity estimation in construction using machine learning methods
DO  - 10.7251/STP2215083S
ER  - 

@conference{
author = "Simić, Nevena and Petronijević, Predrag and Devedžić, Aleksandar and Ivanović, Marija",
year = "2022",
abstract = "This paper analyses the problem of estimating the required quantities of major work items in the construction of residential and residential-commercial buildings using machine learning algorithms. The goal is to form a model that will provide a fast and sufficiently accurate estimate of the quantities of major work items, based on a small amount of known information on the technical characteristics and the environment of future residential and residential-commercial buildings. The case study included 71 projects of residential and residential-commercial buildings construction realised on the territory of the Republic of Serbia. Several models have been developed, and the paper presents those models that had the best performances. The models developed in this way can significantly contribute to resource planning and the accuracy of cost estimates in the early project phases.",
journal = "STEPGRAD2022 - Proceedings of International conference on Contemporary Theory and Practice in Construction XV",
title = "Preliminary quantity estimation in construction using machine learning methods",
doi = "10.7251/STP2215083S"
}

Simić, N., Petronijević, P., Devedžić, A.,& Ivanović, M.. (2022). Preliminary quantity estimation in construction using machine learning methods. in STEPGRAD2022 - Proceedings of International conference on Contemporary Theory and Practice in Construction XV.
https://doi.org/10.7251/STP2215083S

Simić N, Petronijević P, Devedžić A, Ivanović M. Preliminary quantity estimation in construction using machine learning methods. in STEPGRAD2022 - Proceedings of International conference on Contemporary Theory and Practice in Construction XV. 2022;.
doi:10.7251/STP2215083S .

Simić, Nevena, Petronijević, Predrag, Devedžić, Aleksandar, Ivanović, Marija, "Preliminary quantity estimation in construction using machine learning methods" in STEPGRAD2022 - Proceedings of International conference on Contemporary Theory and Practice in Construction XV (2022),
https://doi.org/10.7251/STP2215083S . .

TY  - JOUR
AU  - Milošević, Igor
AU  - Kovačević, Miloš
AU  - Petronijević, Predrag
PY  - 2021
UR  - https://grafar.grf.bg.ac.rs/handle/123456789/2422
AB  - Knowing the right moment for the sale of used heavy construction equipment is important information for every construction company. The proposed methodology uses ensemble machine learning techniques to estimate the price (residual value) of used heavy equipment in both the present and the near future. Each machine in the model is represented with four groups of attributes: age and mechanical (describing the machine) and geographical and economic (describing the target market). The research suggests that the ensemble model based on random forest, light gradient boosting, and neural network members, as well as support vector regression as a decision unit, gives better estimates than the traditional regression or individual machine learning models. The model is built and verified on a large data set of 500,000 machines advertised in 50 US states from 1989 to 2012.
PB  - http://cedb.asce.org
T2  - Journal of Construction Engineering and Management. ASCE / American Society of Civil Engineers
T1  - Estimating residual value of heavy construction equipment using ensemble learning
IS  - 7
VL  - 147
DO  - 10.1061/(ASCE)CO.1943-7862.0002088
ER  - 

@article{
author = "Milošević, Igor and Kovačević, Miloš and Petronijević, Predrag",
year = "2021",
abstract = "Knowing the right moment for the sale of used heavy construction equipment is important information for every construction company. The proposed methodology uses ensemble machine learning techniques to estimate the price (residual value) of used heavy equipment in both the present and the near future. Each machine in the model is represented with four groups of attributes: age and mechanical (describing the machine) and geographical and economic (describing the target market). The research suggests that the ensemble model based on random forest, light gradient boosting, and neural network members, as well as support vector regression as a decision unit, gives better estimates than the traditional regression or individual machine learning models. The model is built and verified on a large data set of 500,000 machines advertised in 50 US states from 1989 to 2012.",
publisher = "http://cedb.asce.org",
journal = "Journal of Construction Engineering and Management. ASCE / American Society of Civil Engineers",
title = "Estimating residual value of heavy construction equipment using ensemble learning",
number = "7",
volume = "147",
doi = "10.1061/(ASCE)CO.1943-7862.0002088"
}

Milošević, I., Kovačević, M.,& Petronijević, P.. (2021). Estimating residual value of heavy construction equipment using ensemble learning. in Journal of Construction Engineering and Management. ASCE / American Society of Civil Engineers
http://cedb.asce.org., 147(7).
https://doi.org/10.1061/(ASCE)CO.1943-7862.0002088

Milošević I, Kovačević M, Petronijević P. Estimating residual value of heavy construction equipment using ensemble learning. in Journal of Construction Engineering and Management. ASCE / American Society of Civil Engineers. 2021;147(7).
doi:10.1061/(ASCE)CO.1943-7862.0002088 .

Milošević, Igor, Kovačević, Miloš, Petronijević, Predrag, "Estimating residual value of heavy construction equipment using ensemble learning" in Journal of Construction Engineering and Management. ASCE / American Society of Civil Engineers, 147, no. 7 (2021),
https://doi.org/10.1061/(ASCE)CO.1943-7862.0002088 . .

TY  - JOUR
AU  - Simić, Nevena
AU  - Devedžić, Aleksandar
AU  - Ivanović, Marija
AU  - Petronijević, Predrag
PY  - 2021
UR  - https://grafar.grf.bg.ac.rs/handle/123456789/2620
AB  - Ovaj rad se bavi problemom procena potrebnih količina radova, kao i koštanja izgradnje stambenih i stambeno-poslovnih objekata korišćenjem algoritama mašinskog učenja. Osnovni cilj je analiza mogućnosti primene mašinskog učenja za razvoj modela koji će za kratko vreme pružiti dovoljno preciznu preliminarnu procenu potrebnih količina i cena glavnih radova na osnovu malog broja poznatih parametara. Istraživanje je sprovedeno na osnovu podataka o realizovanim projektima izgradnje višeporodičnih stambenih i stambeno-poslovnih objekata koji su izgrađeni u periodu od 2012. do 2020. godine na teritoriji Republike Srbije. U radu je predloženo nekoliko modela za procenu količina i cena pojedinih vrsta radova, kao i ukupne cene građevinskih radova. Rezultati analize su pokazali da se veća tačnost može postići predikcijom količina nego cena pojedinih radova. Razvijeni modeli mogu biti korisni u procesu planiranja troškova i količina potrebnog materijala u ranim fazama razvoja projekta.
AB  - This paper deals with the problem of estimating the required quantities of works, as well as the cost of construction of residential and residential-commercial buildings using machine learning algorithms.The main goal is to analyze the possibility of applying machine learning for the development of a model that will in a short time provide a sufficiently precise preliminary estimate of the required quantities and cost of major works based on a small number of known parameters.The research was conducted on the basis of data on realized projects of the construction of multi-family residential and residential-commercialbuildings that were constructed in the period from 2012 to 2020 on the territory of the Republic of Serbia.The paper proposes several models for estimating the quantities and cost of individual types of works, as well as the total price of construction works.The results of the analysis showed that greater accuracy can be achieved by predicting quantities than the cost of individual works.The developed models can be useful in the process of planning the cost and quantities of required material in the early stages of project development.
PB  - Udruženje inženjera građevinarstva, geotehnike, arhitekture i urbanista "Izgradnja"
T2  - Izgradnja
T1  - Primena mašinskog učenja za procenu cena i količina radova pri izgradnji stambenih i stambeno-poslovnih objekata
IS  - 5-8
VL  - 124-132
UR  - https://hdl.handle.net/21.15107/rcub_grafar_2620
ER  - 

@article{
author = "Simić, Nevena and Devedžić, Aleksandar and Ivanović, Marija and Petronijević, Predrag",
year = "2021",
abstract = "Ovaj rad se bavi problemom procena potrebnih količina radova, kao i koštanja izgradnje stambenih i stambeno-poslovnih objekata korišćenjem algoritama mašinskog učenja. Osnovni cilj je analiza mogućnosti primene mašinskog učenja za razvoj modela koji će za kratko vreme pružiti dovoljno preciznu preliminarnu procenu potrebnih količina i cena glavnih radova na osnovu malog broja poznatih parametara. Istraživanje je sprovedeno na osnovu podataka o realizovanim projektima izgradnje višeporodičnih stambenih i stambeno-poslovnih objekata koji su izgrađeni u periodu od 2012. do 2020. godine na teritoriji Republike Srbije. U radu je predloženo nekoliko modela za procenu količina i cena pojedinih vrsta radova, kao i ukupne cene građevinskih radova. Rezultati analize su pokazali da se veća tačnost može postići predikcijom količina nego cena pojedinih radova. Razvijeni modeli mogu biti korisni u procesu planiranja troškova i količina potrebnog materijala u ranim fazama razvoja projekta., This paper deals with the problem of estimating the required quantities of works, as well as the cost of construction of residential and residential-commercial buildings using machine learning algorithms.The main goal is to analyze the possibility of applying machine learning for the development of a model that will in a short time provide a sufficiently precise preliminary estimate of the required quantities and cost of major works based on a small number of known parameters.The research was conducted on the basis of data on realized projects of the construction of multi-family residential and residential-commercialbuildings that were constructed in the period from 2012 to 2020 on the territory of the Republic of Serbia.The paper proposes several models for estimating the quantities and cost of individual types of works, as well as the total price of construction works.The results of the analysis showed that greater accuracy can be achieved by predicting quantities than the cost of individual works.The developed models can be useful in the process of planning the cost and quantities of required material in the early stages of project development.",
publisher = "Udruženje inženjera građevinarstva, geotehnike, arhitekture i urbanista "Izgradnja"",
journal = "Izgradnja",
title = "Primena mašinskog učenja za procenu cena i količina radova pri izgradnji stambenih i stambeno-poslovnih objekata",
number = "5-8",
volume = "124-132",
url = "https://hdl.handle.net/21.15107/rcub_grafar_2620"
}

Simić, N., Devedžić, A., Ivanović, M.,& Petronijević, P.. (2021). Primena mašinskog učenja za procenu cena i količina radova pri izgradnji stambenih i stambeno-poslovnih objekata. in Izgradnja
Udruženje inženjera građevinarstva, geotehnike, arhitekture i urbanista "Izgradnja"., 124-132(5-8).
https://hdl.handle.net/21.15107/rcub_grafar_2620

Simić N, Devedžić A, Ivanović M, Petronijević P. Primena mašinskog učenja za procenu cena i količina radova pri izgradnji stambenih i stambeno-poslovnih objekata. in Izgradnja. 2021;124-132(5-8).
https://hdl.handle.net/21.15107/rcub_grafar_2620 .

Simić, Nevena, Devedžić, Aleksandar, Ivanović, Marija, Petronijević, Predrag, "Primena mašinskog učenja za procenu cena i količina radova pri izgradnji stambenih i stambeno-poslovnih objekata" in Izgradnja, 124-132, no. 5-8 (2021),
https://hdl.handle.net/21.15107/rcub_grafar_2620 .

TY  - JOUR
AU  - Kovačević, Miljan
AU  - Ivanišević, Nenad
AU  - Petronijević, Predrag
AU  - Despotović, Vladimir
PY  - 2021
UR  - https://grafar.grf.bg.ac.rs/handle/123456789/2336
AB  - Seven state-of-the-art machine learning techniques for estimation of construction
costs of reinforced-concrete and prestressed concrete bridges are investigated in this
paper, including artificial neural networks (ANN) and ensembles of ANNs, regression
tree ensembles (random forests, boosted and bagged regression trees), support
vector regression (SVR) method, and Gaussian process regression (GPR). A database
of construction costs and design characteristics for 181 reinforced-concrete and
prestressed-concrete bridges is created for model training and evaluation
PB  - Građevinar
T2  - Časopis Građevinar
T1  - Construction cost estimation of reinforced and prestressed concrete bridges using machine learning
VL  - 73
DO  - 10.14256/JCE.2738.2019
ER  - 

@article{
author = "Kovačević, Miljan and Ivanišević, Nenad and Petronijević, Predrag and Despotović, Vladimir",
year = "2021",
abstract = "Seven state-of-the-art machine learning techniques for estimation of construction
costs of reinforced-concrete and prestressed concrete bridges are investigated in this
paper, including artificial neural networks (ANN) and ensembles of ANNs, regression
tree ensembles (random forests, boosted and bagged regression trees), support
vector regression (SVR) method, and Gaussian process regression (GPR). A database
of construction costs and design characteristics for 181 reinforced-concrete and
prestressed-concrete bridges is created for model training and evaluation",
publisher = "Građevinar",
journal = "Časopis Građevinar",
title = "Construction cost estimation of reinforced and prestressed concrete bridges using machine learning",
volume = "73",
doi = "10.14256/JCE.2738.2019"
}

Kovačević, M., Ivanišević, N., Petronijević, P.,& Despotović, V.. (2021). Construction cost estimation of reinforced and prestressed concrete bridges using machine learning. in Časopis Građevinar
Građevinar., 73.
https://doi.org/10.14256/JCE.2738.2019

Kovačević M, Ivanišević N, Petronijević P, Despotović V. Construction cost estimation of reinforced and prestressed concrete bridges using machine learning. in Časopis Građevinar. 2021;73.
doi:10.14256/JCE.2738.2019 .

Kovačević, Miljan, Ivanišević, Nenad, Petronijević, Predrag, Despotović, Vladimir, "Construction cost estimation of reinforced and prestressed concrete bridges using machine learning" in Časopis Građevinar, 73 (2021),
https://doi.org/10.14256/JCE.2738.2019 . .

TY  - CONF
AU  - Petrović, Marija
AU  - Nenad, Ivanišević
AU  - Petronijević, Predrag
AU  - Marinković, Dejan
AU  - Arizanović, Dragan
PY  - 2018
UR  - https://grafar.grf.bg.ac.rs/handle/123456789/3003
AB  - Tokom realiazacije projekta česta su kašnjenja od strane svih učesnika na projektu. Analiza kašnjenja ima za cilj ne samo kvantifikaciju ukupnog kašnjenja na projektu, već i determinaciju i raspodelu  uticaja svakog od učesnika na kašnjenje projekta. Metode koje se sreću u literaturi i praksi odlikuju različiti pristupi u evaluaciji kašnjenja i dodeljivanja odgovornosti. Cilj ovog rada predstavlja analizu procesa i dobijenih rezultata As Planned vs As Built  i Impacted as planned metoda za analizu kašnjenja sa studijom slučaja. Proračun će biti sproveden u softverskom paketu MS Project.
C3  - 14th International Scientific Conference “iNDiS 2018”, Novi Sad, November 21-23, 2018
T1  - Review of the method for extension of time on project with a case study
UR  - https://hdl.handle.net/21.15107/rcub_grafar_3003
ER  - 

@conference{
author = "Petrović, Marija and Nenad, Ivanišević and Petronijević, Predrag and Marinković, Dejan and Arizanović, Dragan",
year = "2018",
abstract = "Tokom realiazacije projekta česta su kašnjenja od strane svih učesnika na projektu. Analiza kašnjenja ima za cilj ne samo kvantifikaciju ukupnog kašnjenja na projektu, već i determinaciju i raspodelu  uticaja svakog od učesnika na kašnjenje projekta. Metode koje se sreću u literaturi i praksi odlikuju različiti pristupi u evaluaciji kašnjenja i dodeljivanja odgovornosti. Cilj ovog rada predstavlja analizu procesa i dobijenih rezultata As Planned vs As Built  i Impacted as planned metoda za analizu kašnjenja sa studijom slučaja. Proračun će biti sproveden u softverskom paketu MS Project.",
journal = "14th International Scientific Conference “iNDiS 2018”, Novi Sad, November 21-23, 2018",
title = "Review of the method for extension of time on project with a case study",
url = "https://hdl.handle.net/21.15107/rcub_grafar_3003"
}

Petrović, M., Nenad, I., Petronijević, P., Marinković, D.,& Arizanović, D.. (2018). Review of the method for extension of time on project with a case study. in 14th International Scientific Conference “iNDiS 2018”, Novi Sad, November 21-23, 2018.
https://hdl.handle.net/21.15107/rcub_grafar_3003

Petrović M, Nenad I, Petronijević P, Marinković D, Arizanović D. Review of the method for extension of time on project with a case study. in 14th International Scientific Conference “iNDiS 2018”, Novi Sad, November 21-23, 2018. 2018;.
https://hdl.handle.net/21.15107/rcub_grafar_3003 .

Petrović, Marija, Nenad, Ivanišević, Petronijević, Predrag, Marinković, Dejan, Arizanović, Dragan, "Review of the method for extension of time on project with a case study" in 14th International Scientific Conference “iNDiS 2018”, Novi Sad, November 21-23, 2018 (2018),
https://hdl.handle.net/21.15107/rcub_grafar_3003 .

TY  - CONF
AU  - Petrović, Marija
AU  - Simić, Nevena
AU  - Petronijević, Predrag
AU  - Arizanović, Dragan
PY  - 2018
UR  - https://grafar.grf.bg.ac.rs/handle/123456789/3001
AB  - Hydro-insulating materials serve not only to prevent the water penetration in
a building but to protect it from its harmful influence. The bad water influence on a
building is second in a row, just after the fire, and it is the cause of damage and
collapse of the construction. The choice of the reliable hydro-insulating material is an
investment that will pay off during the exploitation of the construction. The choice
problem is often because of the multi-criteria. For solving this problem , the method of
analytical hierarchy process –AHP- is suggested
PB  - Građevinski fakultet u Subotici
C3  - 6. međunarodna konferencija Savremena dostignuća u građevinarstvu, Subotica, 20. april 2018.
T1  - Izbor hidroizolacije za zaštitu podzemnih konstrukcija korišćenjem AHP metode višekriterijumske optimizacije
T1  - SELECTION OF WATERPROOFING FOR PROTECTION OF UNDERGROUND STRUCTURES USING THE AHP METHOD
UR  - https://hdl.handle.net/21.15107/rcub_grafar_3001
ER  - 

@conference{
author = "Petrović, Marija and Simić, Nevena and Petronijević, Predrag and Arizanović, Dragan",
year = "2018",
abstract = "Hydro-insulating materials serve not only to prevent the water penetration in
a building but to protect it from its harmful influence. The bad water influence on a
building is second in a row, just after the fire, and it is the cause of damage and
collapse of the construction. The choice of the reliable hydro-insulating material is an
investment that will pay off during the exploitation of the construction. The choice
problem is often because of the multi-criteria. For solving this problem , the method of
analytical hierarchy process –AHP- is suggested",
publisher = "Građevinski fakultet u Subotici",
journal = "6. međunarodna konferencija Savremena dostignuća u građevinarstvu, Subotica, 20. april 2018.",
title = "Izbor hidroizolacije za zaštitu podzemnih konstrukcija korišćenjem AHP metode višekriterijumske optimizacije, SELECTION OF WATERPROOFING FOR PROTECTION OF UNDERGROUND STRUCTURES USING THE AHP METHOD",
url = "https://hdl.handle.net/21.15107/rcub_grafar_3001"
}

Petrović, M., Simić, N., Petronijević, P.,& Arizanović, D.. (2018). Izbor hidroizolacije za zaštitu podzemnih konstrukcija korišćenjem AHP metode višekriterijumske optimizacije. in 6. međunarodna konferencija Savremena dostignuća u građevinarstvu, Subotica, 20. april 2018.
Građevinski fakultet u Subotici..
https://hdl.handle.net/21.15107/rcub_grafar_3001

Petrović M, Simić N, Petronijević P, Arizanović D. Izbor hidroizolacije za zaštitu podzemnih konstrukcija korišćenjem AHP metode višekriterijumske optimizacije. in 6. međunarodna konferencija Savremena dostignuća u građevinarstvu, Subotica, 20. april 2018.. 2018;.
https://hdl.handle.net/21.15107/rcub_grafar_3001 .

Petrović, Marija, Simić, Nevena, Petronijević, Predrag, Arizanović, Dragan, "Izbor hidroizolacije za zaštitu podzemnih konstrukcija korišćenjem AHP metode višekriterijumske optimizacije" in 6. međunarodna konferencija Savremena dostignuća u građevinarstvu, Subotica, 20. april 2018. (2018),
https://hdl.handle.net/21.15107/rcub_grafar_3001 .

TY  - CONF
AU  - Petronijević, Predrag
AU  - Ivanišević, Nenad
AU  - Arizanović, Dragan
AU  - Marinković, Dejan
AU  - Petrović, Marija
PY  - 2018
UR  - https://grafar.grf.bg.ac.rs/handle/123456789/2345
AB  - Koeficijent korišćenja radnog vremena (Kv) je jedan od najznačajnijih redukcionih koeficijenata pri proračunu učinka građevinskih mašina. Takođe, od svih redukcionih koeficijenata, njega je najteže predvideti. Da bi se preciznije proračunao učinak rada mašina, neophodno je definisati metodologiju za usvajanje koeficijenta Kv. U radu je izvršena analiza radnog vremena građevinskiih mašina, sagledani su gubici vremena u toku rada i prikazan je sastav Kv. Takođe, prikazani su i načini na koji se Kv obračunava po metodologijama Caterpillar i Liebherr.
PB  - INDIS
C3  - 14th INTERNATIONAL CONFERENCE INDIS
T1  - Proračun koeficijenta korišćenja radnog vremena
UR  - https://hdl.handle.net/21.15107/rcub_grafar_2345
ER  - 

@conference{
author = "Petronijević, Predrag and Ivanišević, Nenad and Arizanović, Dragan and Marinković, Dejan and Petrović, Marija",
year = "2018",
abstract = "Koeficijent korišćenja radnog vremena (Kv) je jedan od najznačajnijih redukcionih koeficijenata pri proračunu učinka građevinskih mašina. Takođe, od svih redukcionih koeficijenata, njega je najteže predvideti. Da bi se preciznije proračunao učinak rada mašina, neophodno je definisati metodologiju za usvajanje koeficijenta Kv. U radu je izvršena analiza radnog vremena građevinskiih mašina, sagledani su gubici vremena u toku rada i prikazan je sastav Kv. Takođe, prikazani su i načini na koji se Kv obračunava po metodologijama Caterpillar i Liebherr.",
publisher = "INDIS",
journal = "14th INTERNATIONAL CONFERENCE INDIS",
title = "Proračun koeficijenta korišćenja radnog vremena",
url = "https://hdl.handle.net/21.15107/rcub_grafar_2345"
}

Petronijević, P., Ivanišević, N., Arizanović, D., Marinković, D.,& Petrović, M.. (2018). Proračun koeficijenta korišćenja radnog vremena. in 14th INTERNATIONAL CONFERENCE INDIS
INDIS..
https://hdl.handle.net/21.15107/rcub_grafar_2345

Petronijević P, Ivanišević N, Arizanović D, Marinković D, Petrović M. Proračun koeficijenta korišćenja radnog vremena. in 14th INTERNATIONAL CONFERENCE INDIS. 2018;.
https://hdl.handle.net/21.15107/rcub_grafar_2345 .

Petronijević, Predrag, Ivanišević, Nenad, Arizanović, Dragan, Marinković, Dejan, Petrović, Marija, "Proračun koeficijenta korišćenja radnog vremena" in 14th INTERNATIONAL CONFERENCE INDIS (2018),
https://hdl.handle.net/21.15107/rcub_grafar_2345 .

TY  - CONF
AU  - Petronijević, Predrag
AU  - Ivanišević, Nenad
AU  - Arizanović, Dragan
AU  - Marinković, Dejan
AU  - Petrović, Marija
PY  - 2018
UR  - https://grafar.grf.bg.ac.rs/handle/123456789/2344
AB  - One basic criteria for determining the replacement time of construction
machinery is based on the age , that is, the increase in operating costs of the machine
with time. The key factor which determines and justifies replacement at a given time is
the magnitude of operating costs. This analysis will show a method for replacement
planning and sale of machines in a future time period.
PB  - Građevinski fakultet u Subotici
C3  - 6th International Conference Contemporary achievements in civil engineering
T1  - Method in planning construction machinery replacement
SP  - 727
DO  - 10.14415/konferencijaGFS2018.071
ER  - 

@conference{
author = "Petronijević, Predrag and Ivanišević, Nenad and Arizanović, Dragan and Marinković, Dejan and Petrović, Marija",
year = "2018",
abstract = "One basic criteria for determining the replacement time of construction
machinery is based on the age , that is, the increase in operating costs of the machine
with time. The key factor which determines and justifies replacement at a given time is
the magnitude of operating costs. This analysis will show a method for replacement
planning and sale of machines in a future time period.",
publisher = "Građevinski fakultet u Subotici",
journal = "6th International Conference Contemporary achievements in civil engineering",
title = "Method in planning construction machinery replacement",
pages = "727",
doi = "10.14415/konferencijaGFS2018.071"
}

Petronijević, P., Ivanišević, N., Arizanović, D., Marinković, D.,& Petrović, M.. (2018). Method in planning construction machinery replacement. in 6th International Conference Contemporary achievements in civil engineering
Građevinski fakultet u Subotici., 727.
https://doi.org/10.14415/konferencijaGFS2018.071

Petronijević P, Ivanišević N, Arizanović D, Marinković D, Petrović M. Method in planning construction machinery replacement. in 6th International Conference Contemporary achievements in civil engineering. 2018;:727.
doi:10.14415/konferencijaGFS2018.071 .

Petronijević, Predrag, Ivanišević, Nenad, Arizanović, Dragan, Marinković, Dejan, Petrović, Marija, "Method in planning construction machinery replacement" in 6th International Conference Contemporary achievements in civil engineering (2018):727,
https://doi.org/10.14415/konferencijaGFS2018.071 . .

TY  - CONF
AU  - Petrović, Marija
AU  - Simić, Nevena
AU  - Petronijević, Predrag
AU  - Arizanović, Dragan
PY  - 2018
UR  - https://grafar.grf.bg.ac.rs/handle/123456789/3004
AB  - Vreme za izvođenje radova je parametar koji je od suštinskog značaja i za izvođača i za investitora. Za vlasnika projekta to je izgubljeni profit koji proizilazi iz nemogućnosti eksploatacije objekta u planiranom roku, dok se izvođaču povećavaju troškovi usled produženog delovanja na gradilištu. Analiza kašnjenja pripada forenzici dinamičkih planova. Za razliku od planiranja gde se vrši predikcija budućnosti, kod analize kašnjenja je akcenat na retrospektivnoj analizi. U literaruti se sreće veliki broj metoda za analizu kašnjenja. U ovom radu biće reči o as planned vs as build metodi sa prikazom studije slučaja.
C3  - 15. kongres Društva građevinskih konstruktera Srbije, Zlatibor, 6-8. 9. 2018
T1  - Primena metode za analizu kašnjenja na projektu sa studijom slučaja
UR  - https://hdl.handle.net/21.15107/rcub_grafar_3004
ER  - 

@conference{
author = "Petrović, Marija and Simić, Nevena and Petronijević, Predrag and Arizanović, Dragan",
year = "2018",
abstract = "Vreme za izvođenje radova je parametar koji je od suštinskog značaja i za izvođača i za investitora. Za vlasnika projekta to je izgubljeni profit koji proizilazi iz nemogućnosti eksploatacije objekta u planiranom roku, dok se izvođaču povećavaju troškovi usled produženog delovanja na gradilištu. Analiza kašnjenja pripada forenzici dinamičkih planova. Za razliku od planiranja gde se vrši predikcija budućnosti, kod analize kašnjenja je akcenat na retrospektivnoj analizi. U literaruti se sreće veliki broj metoda za analizu kašnjenja. U ovom radu biće reči o as planned vs as build metodi sa prikazom studije slučaja.",
journal = "15. kongres Društva građevinskih konstruktera Srbije, Zlatibor, 6-8. 9. 2018",
title = "Primena metode za analizu kašnjenja na projektu sa studijom slučaja",
url = "https://hdl.handle.net/21.15107/rcub_grafar_3004"
}

Petrović, M., Simić, N., Petronijević, P.,& Arizanović, D.. (2018). Primena metode za analizu kašnjenja na projektu sa studijom slučaja. in 15. kongres Društva građevinskih konstruktera Srbije, Zlatibor, 6-8. 9. 2018.
https://hdl.handle.net/21.15107/rcub_grafar_3004

Petrović M, Simić N, Petronijević P, Arizanović D. Primena metode za analizu kašnjenja na projektu sa studijom slučaja. in 15. kongres Društva građevinskih konstruktera Srbije, Zlatibor, 6-8. 9. 2018. 2018;.
https://hdl.handle.net/21.15107/rcub_grafar_3004 .

Petrović, Marija, Simić, Nevena, Petronijević, Predrag, Arizanović, Dragan, "Primena metode za analizu kašnjenja na projektu sa studijom slučaja" in 15. kongres Društva građevinskih konstruktera Srbije, Zlatibor, 6-8. 9. 2018 (2018),
https://hdl.handle.net/21.15107/rcub_grafar_3004 .

TY  - CONF
AU  - Petrović, Marija
AU  - Simić, Nevena
AU  - Petronijević, Predrag
AU  - Arizanović, Dragan
AU  - Marinković, Dejan
PY  - 2017
UR  - https://grafar.grf.bg.ac.rs/handle/123456789/1528
AB  - The processes of industrialization and urbanization, apart from positively reflecting on the overall progress of a society, also have the increase of communal waste as a consequence. At the same time, these processes activate a series of new possibilities when it comes to development of the environmental responsibility. Inadequate waste management leads to pollution of all the environmental media and that is why there is so much interest for action in this area. The structure of this paper is presented through the activities from the construction phase of the objects for waste acceptance – sanitary landfills. By working in several directions, geo-synthetic materials can present the answer to complex mechanisms appearing not only during the building phase but also during the exploitation. The dominant role of a geo-barrier is not limited to the protective function as it can also, to certain extent, affect the mechanical characteristics of the soil it is set on. Besides construction technology for such objects, a comparative presentation of the types of geo-barriers is given, including the possibilities and limitations during the construction and exploitation.
C3  - Zbornik radova 5. međunarodne konferencije Savremena dostignuća u građevinarstvu 2017
T1  - Application of geosyntetics in the function of environmental protection
EP  - 497
SP  - 491
VL  - 33
DO  - 10.14415/konferencijaGFS2017.052
ER  - 

@conference{
author = "Petrović, Marija and Simić, Nevena and Petronijević, Predrag and Arizanović, Dragan and Marinković, Dejan",
year = "2017",
abstract = "The processes of industrialization and urbanization, apart from positively reflecting on the overall progress of a society, also have the increase of communal waste as a consequence. At the same time, these processes activate a series of new possibilities when it comes to development of the environmental responsibility. Inadequate waste management leads to pollution of all the environmental media and that is why there is so much interest for action in this area. The structure of this paper is presented through the activities from the construction phase of the objects for waste acceptance – sanitary landfills. By working in several directions, geo-synthetic materials can present the answer to complex mechanisms appearing not only during the building phase but also during the exploitation. The dominant role of a geo-barrier is not limited to the protective function as it can also, to certain extent, affect the mechanical characteristics of the soil it is set on. Besides construction technology for such objects, a comparative presentation of the types of geo-barriers is given, including the possibilities and limitations during the construction and exploitation.",
journal = "Zbornik radova 5. međunarodne konferencije Savremena dostignuća u građevinarstvu 2017",
title = "Application of geosyntetics in the function of environmental protection",
pages = "497-491",
volume = "33",
doi = "10.14415/konferencijaGFS2017.052"
}

Petrović, M., Simić, N., Petronijević, P., Arizanović, D.,& Marinković, D.. (2017). Application of geosyntetics in the function of environmental protection. in Zbornik radova 5. međunarodne konferencije Savremena dostignuća u građevinarstvu 2017, 33, 491-497.
https://doi.org/10.14415/konferencijaGFS2017.052

Petrović M, Simić N, Petronijević P, Arizanović D, Marinković D. Application of geosyntetics in the function of environmental protection. in Zbornik radova 5. međunarodne konferencije Savremena dostignuća u građevinarstvu 2017. 2017;33:491-497.
doi:10.14415/konferencijaGFS2017.052 .

Petrović, Marija, Simić, Nevena, Petronijević, Predrag, Arizanović, Dragan, Marinković, Dejan, "Application of geosyntetics in the function of environmental protection" in Zbornik radova 5. međunarodne konferencije Savremena dostignuća u građevinarstvu 2017, 33 (2017):491-497,
https://doi.org/10.14415/konferencijaGFS2017.052 . .

TY  - THES
AU  - Petronijević, Predrag M.
PY  - 2017
UR  - http://eteze.ni.ac.rs/application/showtheses?thesesId=5785
UR  - https://fedorani.ni.ac.rs/fedora/get/o:1454/bdef:Content/download
UR  - http://vbs.rs/scripts/cobiss?command=DISPLAY&base=70052&RID=533948310
UR  - http://nardus.mpn.gov.rs/123456789/9492
UR  - https://grafar.grf.bg.ac.rs/handle/123456789/1691
AB  - This dissertation contains analysis of reinforced concrete (RC) walls performance under seismic loading. Limit states, ductility and energy indicators of RC walls behavior are examined, along with their failure mechanisms. Sources of theoretical and experimental research of RC walls behavior under static load and load that simulates seismic action are thoroughly and critically examined. Proposal of a nonlinear mathematical model of RC walls behavior under cyclic load was provided, as well as a simplified model suitable for practical analysis Results of analysis are verified by the available experimental research. Nonlinear numerical models of RC walls are used in this study for simulation of seismic action impact on the multi-storey buildings in dual structural systems. Using adequate (here developed or modified) numerical model provides information about the parameters required for proper behavior of RC walls in concrete structures. Based on the proposed model, building structures of various layouts, heights and arrangement of RC walls were analyzed. The analysis was performed using nonlinear methods: static nonlinear (push-over) method and dynamic method which integrates motion equation (time-history method). Storey drift, maximum inter-storey drift and acceleration of ceilings are comparatively analyzed, as criteria for assessment of seismic performances, due to their direct influence on the damage of structural and nonstructural elements.
PB  - Универзитет у Нишу, Грађевинско-архитектонски факултет
T2  - Универзитет у Нишу
T1  - Analiza performansi armiranobetonskih zidova pri seizmičkim dejstvima
UR  - https://hdl.handle.net/21.15107/rcub_nardus_9492
ER  - 

@phdthesis{
author = "Petronijević, Predrag M.",
year = "2017",
abstract = "This dissertation contains analysis of reinforced concrete (RC) walls performance under seismic loading. Limit states, ductility and energy indicators of RC walls behavior are examined, along with their failure mechanisms. Sources of theoretical and experimental research of RC walls behavior under static load and load that simulates seismic action are thoroughly and critically examined. Proposal of a nonlinear mathematical model of RC walls behavior under cyclic load was provided, as well as a simplified model suitable for practical analysis Results of analysis are verified by the available experimental research. Nonlinear numerical models of RC walls are used in this study for simulation of seismic action impact on the multi-storey buildings in dual structural systems. Using adequate (here developed or modified) numerical model provides information about the parameters required for proper behavior of RC walls in concrete structures. Based on the proposed model, building structures of various layouts, heights and arrangement of RC walls were analyzed. The analysis was performed using nonlinear methods: static nonlinear (push-over) method and dynamic method which integrates motion equation (time-history method). Storey drift, maximum inter-storey drift and acceleration of ceilings are comparatively analyzed, as criteria for assessment of seismic performances, due to their direct influence on the damage of structural and nonstructural elements.",
publisher = "Универзитет у Нишу, Грађевинско-архитектонски факултет",
journal = "Универзитет у Нишу",
title = "Analiza performansi armiranobetonskih zidova pri seizmičkim dejstvima",
url = "https://hdl.handle.net/21.15107/rcub_nardus_9492"
}

Petronijević, P. M.. (2017). Analiza performansi armiranobetonskih zidova pri seizmičkim dejstvima. in Универзитет у Нишу
Универзитет у Нишу, Грађевинско-архитектонски факултет..
https://hdl.handle.net/21.15107/rcub_nardus_9492

Petronijević PM. Analiza performansi armiranobetonskih zidova pri seizmičkim dejstvima. in Универзитет у Нишу. 2017;.
https://hdl.handle.net/21.15107/rcub_nardus_9492 .

Petronijević, Predrag M., "Analiza performansi armiranobetonskih zidova pri seizmičkim dejstvima" in Универзитет у Нишу (2017),
https://hdl.handle.net/21.15107/rcub_nardus_9492 .

TY  - CONF
AU  - Ivanišević, Nenad
AU  - Arizanović, Dragan
AU  - Petronijević, Predrag
PY  - 2016
UR  - https://grafar.grf.bg.ac.rs/handle/123456789/1398
PB  - Univerzitet Crne Gore, Građevinski fakultet, Podgorica
C3  - Zbornik radova / Šesti Internacionalni naučno-stručni skup Građevinarstvo - nauka i praksa, Žabljak, 7-11. 03. 2016.
T1  - Aktuelno stanje realizacije izgradnje autoputeva u Republici Srbiji
EP  - 1002
SP  - 996
UR  - https://hdl.handle.net/21.15107/rcub_grafar_1398
ER  - 

@conference{
author = "Ivanišević, Nenad and Arizanović, Dragan and Petronijević, Predrag",
year = "2016",
publisher = "Univerzitet Crne Gore, Građevinski fakultet, Podgorica",
journal = "Zbornik radova / Šesti Internacionalni naučno-stručni skup Građevinarstvo - nauka i praksa, Žabljak, 7-11. 03. 2016.",
title = "Aktuelno stanje realizacije izgradnje autoputeva u Republici Srbiji",
pages = "1002-996",
url = "https://hdl.handle.net/21.15107/rcub_grafar_1398"
}

Ivanišević, N., Arizanović, D.,& Petronijević, P.. (2016). Aktuelno stanje realizacije izgradnje autoputeva u Republici Srbiji. in Zbornik radova / Šesti Internacionalni naučno-stručni skup Građevinarstvo - nauka i praksa, Žabljak, 7-11. 03. 2016.
Univerzitet Crne Gore, Građevinski fakultet, Podgorica., 996-1002.
https://hdl.handle.net/21.15107/rcub_grafar_1398

Ivanišević N, Arizanović D, Petronijević P. Aktuelno stanje realizacije izgradnje autoputeva u Republici Srbiji. in Zbornik radova / Šesti Internacionalni naučno-stručni skup Građevinarstvo - nauka i praksa, Žabljak, 7-11. 03. 2016.. 2016;:996-1002.
https://hdl.handle.net/21.15107/rcub_grafar_1398 .

Ivanišević, Nenad, Arizanović, Dragan, Petronijević, Predrag, "Aktuelno stanje realizacije izgradnje autoputeva u Republici Srbiji" in Zbornik radova / Šesti Internacionalni naučno-stručni skup Građevinarstvo - nauka i praksa, Žabljak, 7-11. 03. 2016. (2016):996-1002,
https://hdl.handle.net/21.15107/rcub_grafar_1398 .

TY  - CONF
AU  - Ivanišević, Nenad
AU  - Petronijević, Predrag
AU  - Arizanović, Dragan
AU  - Milošević, Igor
PY  - 2016
UR  - https://grafar.grf.bg.ac.rs/handle/123456789/1381
PB  - Društvo građevinskih konstruktera Srbije, Beograd
C3  - Zbornik radova / Društvо građevinskih konstruktera Srbije, Simpozijum 2016, 15-17. septembar, Zlatibor
T1  - Uticaj starosti građevinske mašine na troškove rada
EP  - 1128
SP  - 1121
UR  - https://hdl.handle.net/21.15107/rcub_grafar_1381
ER  - 

@conference{
author = "Ivanišević, Nenad and Petronijević, Predrag and Arizanović, Dragan and Milošević, Igor",
year = "2016",
publisher = "Društvo građevinskih konstruktera Srbije, Beograd",
journal = "Zbornik radova / Društvо građevinskih konstruktera Srbije, Simpozijum 2016, 15-17. septembar, Zlatibor",
title = "Uticaj starosti građevinske mašine na troškove rada",
pages = "1128-1121",
url = "https://hdl.handle.net/21.15107/rcub_grafar_1381"
}

Ivanišević, N., Petronijević, P., Arizanović, D.,& Milošević, I.. (2016). Uticaj starosti građevinske mašine na troškove rada. in Zbornik radova / Društvо građevinskih konstruktera Srbije, Simpozijum 2016, 15-17. septembar, Zlatibor
Društvo građevinskih konstruktera Srbije, Beograd., 1121-1128.
https://hdl.handle.net/21.15107/rcub_grafar_1381

Ivanišević N, Petronijević P, Arizanović D, Milošević I. Uticaj starosti građevinske mašine na troškove rada. in Zbornik radova / Društvо građevinskih konstruktera Srbije, Simpozijum 2016, 15-17. septembar, Zlatibor. 2016;:1121-1128.
https://hdl.handle.net/21.15107/rcub_grafar_1381 .

Ivanišević, Nenad, Petronijević, Predrag, Arizanović, Dragan, Milošević, Igor, "Uticaj starosti građevinske mašine na troškove rada" in Zbornik radova / Društvо građevinskih konstruktera Srbije, Simpozijum 2016, 15-17. septembar, Zlatibor (2016):1121-1128,
https://hdl.handle.net/21.15107/rcub_grafar_1381 .

TY  - JOUR
AU  - Milošević, I.
AU  - Petronijević, Predrag
AU  - Arizanović, Dragan
PY  - 2016
UR  - https://grafar.grf.bg.ac.rs/handle/123456789/1078
T2  - Građevinar
T1  - Assessing the Residual Value of Heavy Construction Equipment Depending on the Age of the Machine
UR  - https://hdl.handle.net/21.15107/rcub_grafar_1078
ER  - 

@article{
author = "Milošević, I. and Petronijević, Predrag and Arizanović, Dragan",
year = "2016",
journal = "Građevinar",
title = "Assessing the Residual Value of Heavy Construction Equipment Depending on the Age of the Machine",
url = "https://hdl.handle.net/21.15107/rcub_grafar_1078"
}

Milošević, I., Petronijević, P.,& Arizanović, D.. (2016). Assessing the Residual Value of Heavy Construction Equipment Depending on the Age of the Machine. in Građevinar.
https://hdl.handle.net/21.15107/rcub_grafar_1078

Milošević I, Petronijević P, Arizanović D. Assessing the Residual Value of Heavy Construction Equipment Depending on the Age of the Machine. in Građevinar. 2016;.
https://hdl.handle.net/21.15107/rcub_grafar_1078 .

Milošević, I., Petronijević, Predrag, Arizanović, Dragan, "Assessing the Residual Value of Heavy Construction Equipment Depending on the Age of the Machine" in Građevinar (2016),
https://hdl.handle.net/21.15107/rcub_grafar_1078 .

TY  - CONF
AU  - Simić, Nevena
AU  - Petrović, Marija
AU  - Stjepanović, Mihailo
AU  - Petronijević, Predrag
PY  - 2015
UR  - https://grafar.grf.bg.ac.rs/handle/123456789/3000
AB  - Post-projektnu analizu čine sve aktivnosti čiji je cilj sagledavanje parametara kako je objekat izveden, uključujući i to u kojoj meri on ispunjava projektovane zahteve, kao i to u kom stepenu su sami korisnici zadovoljni “gotovim proizvodom”. Preduzeća koja podjednaku važnost pripisuju post-projektnoj analizi kao i samoj realizaciji projekta ne ponavljaju greške! U toku realizacije projekta “Rekonstrukcije i modernizacije deonice Gilje-Ćuprija-Paraćin, pruga Beograd-Niš”, započeta je izrada post-projektne analize. Način izrade i zaključci su prikazani u radu.
C3  - Šesti međunarodni naučno-stručni simpozijum Instalacije i arhitektura, Beograd, 10. decembar 2015.
T1  - Post-projektna analiza – studija slučaja za linijski infrastrukturni objekat
UR  - https://hdl.handle.net/21.15107/rcub_grafar_3000
ER  - 

@conference{
author = "Simić, Nevena and Petrović, Marija and Stjepanović, Mihailo and Petronijević, Predrag",
year = "2015",
abstract = "Post-projektnu analizu čine sve aktivnosti čiji je cilj sagledavanje parametara kako je objekat izveden, uključujući i to u kojoj meri on ispunjava projektovane zahteve, kao i to u kom stepenu su sami korisnici zadovoljni “gotovim proizvodom”. Preduzeća koja podjednaku važnost pripisuju post-projektnoj analizi kao i samoj realizaciji projekta ne ponavljaju greške! U toku realizacije projekta “Rekonstrukcije i modernizacije deonice Gilje-Ćuprija-Paraćin, pruga Beograd-Niš”, započeta je izrada post-projektne analize. Način izrade i zaključci su prikazani u radu.",
journal = "Šesti međunarodni naučno-stručni simpozijum Instalacije i arhitektura, Beograd, 10. decembar 2015.",
title = "Post-projektna analiza – studija slučaja za linijski infrastrukturni objekat",
url = "https://hdl.handle.net/21.15107/rcub_grafar_3000"
}

Simić, N., Petrović, M., Stjepanović, M.,& Petronijević, P.. (2015). Post-projektna analiza – studija slučaja za linijski infrastrukturni objekat. in Šesti međunarodni naučno-stručni simpozijum Instalacije i arhitektura, Beograd, 10. decembar 2015..
https://hdl.handle.net/21.15107/rcub_grafar_3000

Simić N, Petrović M, Stjepanović M, Petronijević P. Post-projektna analiza – studija slučaja za linijski infrastrukturni objekat. in Šesti međunarodni naučno-stručni simpozijum Instalacije i arhitektura, Beograd, 10. decembar 2015.. 2015;.
https://hdl.handle.net/21.15107/rcub_grafar_3000 .

Simić, Nevena, Petrović, Marija, Stjepanović, Mihailo, Petronijević, Predrag, "Post-projektna analiza – studija slučaja za linijski infrastrukturni objekat" in Šesti međunarodni naučno-stručni simpozijum Instalacije i arhitektura, Beograd, 10. decembar 2015. (2015),
https://hdl.handle.net/21.15107/rcub_grafar_3000 .

TY  - JOUR
AU  - Čokić, Miloš
AU  - Petronijević, Predrag
AU  - Todorović, Marija
AU  - Pecić, Nenad
PY  - 2015
UR  - https://grafar.grf.bg.ac.rs/handle/123456789/658
AB  - This paper presents a comparative analysis of embodied energy and CO2 emission, in the construction process of three bridge structures. Analyzed structures are prestressed concrete bridges with different structural systems and a total length of 88 meters. The correlation of structural system, construction method, material quantities and embodied energy and CO2 emission were considered. Influence of the selected solutions in main steps of design and construction on the energy consumption and the emission of CO2 is presented. The results should provide a better understanding of the effects of certain factors, in the bridge construction process, and their impact on the environment.
AB  - U radu je prikazana uporedna analiza vezane energije i emisije CO2 u procesu gradnje, za tri mostovske konstrukcije. Analizirane konstrukcije su prethodno napregnuti betonski mostovi, različitih statičkih sistema, ukupne dužine 88 metara. Razmatrana je međusobna uslovljenost izbora konstruktivnih rešenja, načina izvođenja konstrukcije, količine utrošenog materijala, vezane energije i emisije CO2. Dat je uvid u način na koji se glavni koraci u projektovanju i izvođenju mostova odražavaju na energetski utrošak i emisiju CO2, procentualno i u ukupnom iznosu. Dobijeni rezultati bi trebalo da omoguće bolje sagledavanje uticaja pojedinih faktora u procesu izvođenja mostova i njihov uticaj na životnu sredinu.
PB  - Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije, Beograd
T2  - Građevinski materijali i konstrukcije
T1  - Analysis of the embodied energy and the CO2 emission in construction process of a bridge structure from the aspect of sustainability
T1  - Analiza vezane energije i emisije CO2 za izvođenje mostovske konstrukcije sa stanovišta održivosti
EP  - 20
IS  - 2
SP  - 3
VL  - 58
DO  - 10.5937/grmk1502003c
ER  - 

@article{
author = "Čokić, Miloš and Petronijević, Predrag and Todorović, Marija and Pecić, Nenad",
year = "2015",
abstract = "This paper presents a comparative analysis of embodied energy and CO2 emission, in the construction process of three bridge structures. Analyzed structures are prestressed concrete bridges with different structural systems and a total length of 88 meters. The correlation of structural system, construction method, material quantities and embodied energy and CO2 emission were considered. Influence of the selected solutions in main steps of design and construction on the energy consumption and the emission of CO2 is presented. The results should provide a better understanding of the effects of certain factors, in the bridge construction process, and their impact on the environment., U radu je prikazana uporedna analiza vezane energije i emisije CO2 u procesu gradnje, za tri mostovske konstrukcije. Analizirane konstrukcije su prethodno napregnuti betonski mostovi, različitih statičkih sistema, ukupne dužine 88 metara. Razmatrana je međusobna uslovljenost izbora konstruktivnih rešenja, načina izvođenja konstrukcije, količine utrošenog materijala, vezane energije i emisije CO2. Dat je uvid u način na koji se glavni koraci u projektovanju i izvođenju mostova odražavaju na energetski utrošak i emisiju CO2, procentualno i u ukupnom iznosu. Dobijeni rezultati bi trebalo da omoguće bolje sagledavanje uticaja pojedinih faktora u procesu izvođenja mostova i njihov uticaj na životnu sredinu.",
publisher = "Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije, Beograd",
journal = "Građevinski materijali i konstrukcije",
title = "Analysis of the embodied energy and the CO2 emission in construction process of a bridge structure from the aspect of sustainability, Analiza vezane energije i emisije CO2 za izvođenje mostovske konstrukcije sa stanovišta održivosti",
pages = "20-3",
number = "2",
volume = "58",
doi = "10.5937/grmk1502003c"
}

Čokić, M., Petronijević, P., Todorović, M.,& Pecić, N.. (2015). Analysis of the embodied energy and the CO2 emission in construction process of a bridge structure from the aspect of sustainability. in Građevinski materijali i konstrukcije
Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije, Beograd., 58(2), 3-20.
https://doi.org/10.5937/grmk1502003c

Čokić M, Petronijević P, Todorović M, Pecić N. Analysis of the embodied energy and the CO2 emission in construction process of a bridge structure from the aspect of sustainability. in Građevinski materijali i konstrukcije. 2015;58(2):3-20.
doi:10.5937/grmk1502003c .

Čokić, Miloš, Petronijević, Predrag, Todorović, Marija, Pecić, Nenad, "Analysis of the embodied energy and the CO2 emission in construction process of a bridge structure from the aspect of sustainability" in Građevinski materijali i konstrukcije, 58, no. 2 (2015):3-20,
https://doi.org/10.5937/grmk1502003c . .

TY  - CONF
AU  - Petronijević, Predrag
AU  - Arizanović, Dragan
AU  - Milošević, Igor
PY  - 2015
UR  - https://grafar.grf.bg.ac.rs/handle/123456789/2347
AB  - Za kvalitetno planiranje i upravljanje građevinskim projektima неопходно је обезбедити relevantne i kvalitetne izvore tehnoloških informacija. U radu je prikazan jedan od mogućih pristupa analizi postojećih izvora tehnoloških informacija u cilju prepoznavanja njihovih karakteristika i utvrđivanja odlika "optimalnog izvora" informacija. Da bi se preciznije definisala priroda "optimalnog izvora" tehnoloških информација, izvršena је anketa među ekspertima građevinske struke kojom su istraživani njihova iskustva u traženju tehnoloških informacija, izvori koje koriste, problemi sa kojima se susreću i navike koje imaju u svakodnevnom radu.
PB  - INDIS
C3  - XIII Međunarodna naučna konferencija INDIS
T1  - Analiza i rangiranje kvaliteta izvora tehnoloških informacija u građevinarstvu
VL  - 1
UR  - https://hdl.handle.net/21.15107/rcub_grafar_2347
ER  - 

@conference{
author = "Petronijević, Predrag and Arizanović, Dragan and Milošević, Igor",
year = "2015",
abstract = "Za kvalitetno planiranje i upravljanje građevinskim projektima неопходно је обезбедити relevantne i kvalitetne izvore tehnoloških informacija. U radu je prikazan jedan od mogućih pristupa analizi postojećih izvora tehnoloških informacija u cilju prepoznavanja njihovih karakteristika i utvrđivanja odlika "optimalnog izvora" informacija. Da bi se preciznije definisala priroda "optimalnog izvora" tehnoloških информација, izvršena је anketa među ekspertima građevinske struke kojom su istraživani njihova iskustva u traženju tehnoloških informacija, izvori koje koriste, problemi sa kojima se susreću i navike koje imaju u svakodnevnom radu.",
publisher = "INDIS",
journal = "XIII Međunarodna naučna konferencija INDIS",
title = "Analiza i rangiranje kvaliteta izvora tehnoloških informacija u građevinarstvu",
volume = "1",
url = "https://hdl.handle.net/21.15107/rcub_grafar_2347"
}

Petronijević, P., Arizanović, D.,& Milošević, I.. (2015). Analiza i rangiranje kvaliteta izvora tehnoloških informacija u građevinarstvu. in XIII Međunarodna naučna konferencija INDIS
INDIS., 1.
https://hdl.handle.net/21.15107/rcub_grafar_2347

Petronijević P, Arizanović D, Milošević I. Analiza i rangiranje kvaliteta izvora tehnoloških informacija u građevinarstvu. in XIII Međunarodna naučna konferencija INDIS. 2015;1.
https://hdl.handle.net/21.15107/rcub_grafar_2347 .

Petronijević, Predrag, Arizanović, Dragan, Milošević, Igor, "Analiza i rangiranje kvaliteta izvora tehnoloških informacija u građevinarstvu" in XIII Međunarodna naučna konferencija INDIS, 1 (2015),
https://hdl.handle.net/21.15107/rcub_grafar_2347 .

TY  - CONF
AU  - Petronijević, Predrag
AU  - Arizanović, Dragan
AU  - Ivanišević, Nenad
AU  - Milošević, Igor
PY  - 2015
UR  - https://grafar.grf.bg.ac.rs/handle/123456789/2343
AB  - Rezidualna vrednost, ili vrednost polovne mašine definiše se kao cena za koju se korišćena mehanizacija može prodati na tržtu u određenom periodu. Ovo istraživanje ima za cilj da pomogne razvoju kreiranja regresionog modela koji mogu da predvide rezidualnu vrednost mašine na aukciji. Istraživanje je pokazalo da postoji razlika u senzitivnosti varijabli onih mašina čiji je ukupni kumulativni broj sati veći od 2000 u odnosu na mašine sa manje od 2000 radnih sati. Rezidualna vrednost mašine ima veću senzitivnost u odnosu na varijablu koja opisuje kalendarsku starost mašine, nego kumulativni broj sati rada mašine.
PB  - YUPMA - Udruženje za upravljanje projektima Srbije
C3  - XIX Internacionalni simpozijum projektnog menadžmenta, Zlatibor
T1  - Određivanje rezidualne vrednosti građevinskih mašina
SP  - 356
UR  - https://hdl.handle.net/21.15107/rcub_grafar_2343
ER  - 

@conference{
author = "Petronijević, Predrag and Arizanović, Dragan and Ivanišević, Nenad and Milošević, Igor",
year = "2015",
abstract = "Rezidualna vrednost, ili vrednost polovne mašine definiše se kao cena za koju se korišćena mehanizacija može prodati na tržtu u određenom periodu. Ovo istraživanje ima za cilj da pomogne razvoju kreiranja regresionog modela koji mogu da predvide rezidualnu vrednost mašine na aukciji. Istraživanje je pokazalo da postoji razlika u senzitivnosti varijabli onih mašina čiji je ukupni kumulativni broj sati veći od 2000 u odnosu na mašine sa manje od 2000 radnih sati. Rezidualna vrednost mašine ima veću senzitivnost u odnosu na varijablu koja opisuje kalendarsku starost mašine, nego kumulativni broj sati rada mašine.",
publisher = "YUPMA - Udruženje za upravljanje projektima Srbije",
journal = "XIX Internacionalni simpozijum projektnog menadžmenta, Zlatibor",
title = "Određivanje rezidualne vrednosti građevinskih mašina",
pages = "356",
url = "https://hdl.handle.net/21.15107/rcub_grafar_2343"
}

Petronijević, P., Arizanović, D., Ivanišević, N.,& Milošević, I.. (2015). Određivanje rezidualne vrednosti građevinskih mašina. in XIX Internacionalni simpozijum projektnog menadžmenta, Zlatibor
YUPMA - Udruženje za upravljanje projektima Srbije., 356.
https://hdl.handle.net/21.15107/rcub_grafar_2343

Petronijević P, Arizanović D, Ivanišević N, Milošević I. Određivanje rezidualne vrednosti građevinskih mašina. in XIX Internacionalni simpozijum projektnog menadžmenta, Zlatibor. 2015;:356.
https://hdl.handle.net/21.15107/rcub_grafar_2343 .

Petronijević, Predrag, Arizanović, Dragan, Ivanišević, Nenad, Milošević, Igor, "Određivanje rezidualne vrednosti građevinskih mašina" in XIX Internacionalni simpozijum projektnog menadžmenta, Zlatibor (2015):356,
https://hdl.handle.net/21.15107/rcub_grafar_2343 .

TY  - CONF
AU  - Ivanišević, Nenad
AU  - Arizanović, Dragan
AU  - Petronijević, Predrag
AU  - Mikić, Miljan
PY  - 2014
UR  - https://grafar.grf.bg.ac.rs/handle/123456789/1250
AB  - In order to achieve the economic development of the Republic of Serbia, it is necessary to provide adequate traffic infrastructure, particularly highways. The second lane on the northern branch of Corridor X (E-75) from Horgoš to Belgrade has been completed, and the construction works on the eastern branch (E-80) from Niš to the Bulgarian border and on the southern branch (E-75) from Leskovac to the Macedonian border are ongoing. Works are also in progress on the Belgrade bypass. Works on the E-763 ("Corridor 11") are executed between Obrenovac and Preljina. Continuation of this road towards Montenegro is being prepared. Also preparations for the highway on the E-761 from Pojate to Preljina are ongoing.
AB  - U cilju ostvarivanja ekonomskog razvoja Republike Srbije neophodno je obezbediti odgovarajuću saobraćanu infrastrukturu, a naročito autoputsku. Završena je izgradnja druge trake na severnom kraku Koridora X (E-75) od Horgoša do Beograda, a u toku je izvođenje radova na istočnom kraku (E-80) od Niša do granice sa Bugarskom i južnom kraku (E-75) od Leskovca do granice sa Makedonijom. Takođe su u toku radovi na obilaznici Beograda. Radovi na E-763 (“Koridor 11”) se izvode od Obrenovca do Preljine, a u pripremi je nastavak ovog puta prema Crnoj Gori kao i autoput na E-761 od Pojata do Preljine
PB  - Društvo građevinskih konstruktera, Beograd
C3  - Zbornik radova / DGKS Društvo građevinskih konstruktera Srbije, 14. kongres, Novi Sad, 24-26. oktobar, 2014
T1  - Current strategy for highway construction in the Republic of Serbia
T1  - Aktuelna strategija realizacije izgradnje autoputeva u Republici Srbiji
EP  - 120
SP  - 109
UR  - https://hdl.handle.net/21.15107/rcub_grafar_1250
ER  - 

@conference{
author = "Ivanišević, Nenad and Arizanović, Dragan and Petronijević, Predrag and Mikić, Miljan",
year = "2014",
abstract = "In order to achieve the economic development of the Republic of Serbia, it is necessary to provide adequate traffic infrastructure, particularly highways. The second lane on the northern branch of Corridor X (E-75) from Horgoš to Belgrade has been completed, and the construction works on the eastern branch (E-80) from Niš to the Bulgarian border and on the southern branch (E-75) from Leskovac to the Macedonian border are ongoing. Works are also in progress on the Belgrade bypass. Works on the E-763 ("Corridor 11") are executed between Obrenovac and Preljina. Continuation of this road towards Montenegro is being prepared. Also preparations for the highway on the E-761 from Pojate to Preljina are ongoing., U cilju ostvarivanja ekonomskog razvoja Republike Srbije neophodno je obezbediti odgovarajuću saobraćanu infrastrukturu, a naročito autoputsku. Završena je izgradnja druge trake na severnom kraku Koridora X (E-75) od Horgoša do Beograda, a u toku je izvođenje radova na istočnom kraku (E-80) od Niša do granice sa Bugarskom i južnom kraku (E-75) od Leskovca do granice sa Makedonijom. Takođe su u toku radovi na obilaznici Beograda. Radovi na E-763 (“Koridor 11”) se izvode od Obrenovca do Preljine, a u pripremi je nastavak ovog puta prema Crnoj Gori kao i autoput na E-761 od Pojata do Preljine",
publisher = "Društvo građevinskih konstruktera, Beograd",
journal = "Zbornik radova / DGKS Društvo građevinskih konstruktera Srbije, 14. kongres, Novi Sad, 24-26. oktobar, 2014",
title = "Current strategy for highway construction in the Republic of Serbia, Aktuelna strategija realizacije izgradnje autoputeva u Republici Srbiji",
pages = "120-109",
url = "https://hdl.handle.net/21.15107/rcub_grafar_1250"
}

Ivanišević, N., Arizanović, D., Petronijević, P.,& Mikić, M.. (2014). Current strategy for highway construction in the Republic of Serbia. in Zbornik radova / DGKS Društvo građevinskih konstruktera Srbije, 14. kongres, Novi Sad, 24-26. oktobar, 2014
Društvo građevinskih konstruktera, Beograd., 109-120.
https://hdl.handle.net/21.15107/rcub_grafar_1250

Ivanišević N, Arizanović D, Petronijević P, Mikić M. Current strategy for highway construction in the Republic of Serbia. in Zbornik radova / DGKS Društvo građevinskih konstruktera Srbije, 14. kongres, Novi Sad, 24-26. oktobar, 2014. 2014;:109-120.
https://hdl.handle.net/21.15107/rcub_grafar_1250 .

Ivanišević, Nenad, Arizanović, Dragan, Petronijević, Predrag, Mikić, Miljan, "Current strategy for highway construction in the Republic of Serbia" in Zbornik radova / DGKS Društvo građevinskih konstruktera Srbije, 14. kongres, Novi Sad, 24-26. oktobar, 2014 (2014):109-120,
https://hdl.handle.net/21.15107/rcub_grafar_1250 .

TY  - CONF
AU  - Petronijević, Predrag
AU  - Kovačević, Miloš
AU  - Ivanišević, Nenad
AU  - Arizanović, Dragan
PY  - 2013
UR  - https://grafar.grf.bg.ac.rs/handle/123456789/2342
AB  - In everyday work, civil engineers are forced to search for technological information. Out of the many available sources of information, there is no one perfect source. The speed of finding the required information has often a key impact on the quality of their work. In this paper, the ways in which selected representatives of the group of civil engineers gain information on technology are analyzed, their grading of various sources of technological information, as well as the advantages and weakness of each of them. As a conclusion, recommendation for the preparation of an optimal source of information on technology for this specific civil engineering field is given.
PB  - Faculty of Civil Engineering University of Zagreb
C3  - 11th International Conference - organization, technology and management in construction - OTMC
T1  - Analisys of sources of information on technology for project managers in civil engineering
SP  - 308
UR  - https://hdl.handle.net/21.15107/rcub_grafar_2342
ER  - 

@conference{
author = "Petronijević, Predrag and Kovačević, Miloš and Ivanišević, Nenad and Arizanović, Dragan",
year = "2013",
abstract = "In everyday work, civil engineers are forced to search for technological information. Out of the many available sources of information, there is no one perfect source. The speed of finding the required information has often a key impact on the quality of their work. In this paper, the ways in which selected representatives of the group of civil engineers gain information on technology are analyzed, their grading of various sources of technological information, as well as the advantages and weakness of each of them. As a conclusion, recommendation for the preparation of an optimal source of information on technology for this specific civil engineering field is given.",
publisher = "Faculty of Civil Engineering University of Zagreb",
journal = "11th International Conference - organization, technology and management in construction - OTMC",
title = "Analisys of sources of information on technology for project managers in civil engineering",
pages = "308",
url = "https://hdl.handle.net/21.15107/rcub_grafar_2342"
}

Petronijević, P., Kovačević, M., Ivanišević, N.,& Arizanović, D.. (2013). Analisys of sources of information on technology for project managers in civil engineering. in 11th International Conference - organization, technology and management in construction - OTMC
Faculty of Civil Engineering University of Zagreb., 308.
https://hdl.handle.net/21.15107/rcub_grafar_2342

Petronijević P, Kovačević M, Ivanišević N, Arizanović D. Analisys of sources of information on technology for project managers in civil engineering. in 11th International Conference - organization, technology and management in construction - OTMC. 2013;:308.
https://hdl.handle.net/21.15107/rcub_grafar_2342 .

Petronijević, Predrag, Kovačević, Miloš, Ivanišević, Nenad, Arizanović, Dragan, "Analisys of sources of information on technology for project managers in civil engineering" in 11th International Conference - organization, technology and management in construction - OTMC (2013):308,
https://hdl.handle.net/21.15107/rcub_grafar_2342 .

TY  - CONF
AU  - Petronijević, Predrag
AU  - Ivanišević, Nenad
AU  - Arizanović, Dragan
PY  - 2012
UR  - https://grafar.grf.bg.ac.rs/handle/123456789/2341
AB  - Construction equipment has a great impact on the overall cost of
construction projects. Therefore, careful planning and selection of
appropriate combination of equipment is essential for the economic
success of the contractor. In practice, the process of equipment selection is
mainly based on manufacturer’s recommendations and the contractor’s
intuition without using any scientifically based method.
This paper discusses a model for selection of an optimal set of construction
machines by applying the multi criterion AHP method. The model is based
on comparison of alternative sets using the selected criteria functions
which are defined by the user at the start of each optimization. The
proposed method has been successfully tested on a case of construction of
embankment on a highway section on Corridor X in Serbia. The criteria
functions were: output, unit price and profit per unit. A sensitivity analysis
was also performed to check the stability of the final decision.
C3  - XX International Conference MHCL’12
T1  - Оptimization of construction equipment selection by applying AHP method
SP  - 171
UR  - https://hdl.handle.net/21.15107/rcub_grafar_2341
ER  - 

@conference{
author = "Petronijević, Predrag and Ivanišević, Nenad and Arizanović, Dragan",
year = "2012",
abstract = "Construction equipment has a great impact on the overall cost of
construction projects. Therefore, careful planning and selection of
appropriate combination of equipment is essential for the economic
success of the contractor. In practice, the process of equipment selection is
mainly based on manufacturer’s recommendations and the contractor’s
intuition without using any scientifically based method.
This paper discusses a model for selection of an optimal set of construction
machines by applying the multi criterion AHP method. The model is based
on comparison of alternative sets using the selected criteria functions
which are defined by the user at the start of each optimization. The
proposed method has been successfully tested on a case of construction of
embankment on a highway section on Corridor X in Serbia. The criteria
functions were: output, unit price and profit per unit. A sensitivity analysis
was also performed to check the stability of the final decision.",
journal = "XX International Conference MHCL’12",
title = "Оptimization of construction equipment selection by applying AHP method",
pages = "171",
url = "https://hdl.handle.net/21.15107/rcub_grafar_2341"
}

Petronijević, P., Ivanišević, N.,& Arizanović, D.. (2012). Оptimization of construction equipment selection by applying AHP method. in XX International Conference MHCL’12, 171.
https://hdl.handle.net/21.15107/rcub_grafar_2341

Petronijević P, Ivanišević N, Arizanović D. Оptimization of construction equipment selection by applying AHP method. in XX International Conference MHCL’12. 2012;:171.
https://hdl.handle.net/21.15107/rcub_grafar_2341 .

Petronijević, Predrag, Ivanišević, Nenad, Arizanović, Dragan, "Оptimization of construction equipment selection by applying AHP method" in XX International Conference MHCL’12 (2012):171,
https://hdl.handle.net/21.15107/rcub_grafar_2341 .

TY  - CONF
AU  - Ivanišević, Nenad
AU  - Petronijević, Predrag
AU  - Ivanišević, Nenad
PY  - 2012
UR  - https://grafar.grf.bg.ac.rs/handle/123456789/2340
AB  - Projektovanje organizacije građenja je neizbežan deo pripreme za realizaciju projekta.
Iako važan, ovaj deo pripreme tehničke dokumentacije pati od niza mana nastalih kao
posledica vrlo kratkog roka, nedostupnosti svih potrebnih informacija i brojnih promena
tehnoloških parametara. Brojni su slučajevi da izvođač pristupa realizaciji ugovora bez
jasnog rešenja logističkih zadataka i plana kako ostvariti ugovorenu dinamiku radova. U
radu su analizirani neki problemi na početku investicionog projekta i dati su predlozi za
izradu Projekta organizacije građenja ukazujući na ulogu tehničkog izveštaja kao
važnog rezimea najvažnijih podataka o tehnološkim rešenjima i karakteristikama
(očekivanim rezultatima) primenjenih organizacionih mera.
PB  - Građevinski fakultet u Podgorici
C3  - 4th International conference civil engineering - science and practice, Žablјak, Montenegro
T1  - Struktura projekta organizacije građenja
SP  - 2285
UR  - https://hdl.handle.net/21.15107/rcub_grafar_2340
ER  - 

@conference{
author = "Ivanišević, Nenad and Petronijević, Predrag and Ivanišević, Nenad",
year = "2012",
abstract = "Projektovanje organizacije građenja je neizbežan deo pripreme za realizaciju projekta.
Iako važan, ovaj deo pripreme tehničke dokumentacije pati od niza mana nastalih kao
posledica vrlo kratkog roka, nedostupnosti svih potrebnih informacija i brojnih promena
tehnoloških parametara. Brojni su slučajevi da izvođač pristupa realizaciji ugovora bez
jasnog rešenja logističkih zadataka i plana kako ostvariti ugovorenu dinamiku radova. U
radu su analizirani neki problemi na početku investicionog projekta i dati su predlozi za
izradu Projekta organizacije građenja ukazujući na ulogu tehničkog izveštaja kao
važnog rezimea najvažnijih podataka o tehnološkim rešenjima i karakteristikama
(očekivanim rezultatima) primenjenih organizacionih mera.",
publisher = "Građevinski fakultet u Podgorici",
journal = "4th International conference civil engineering - science and practice, Žablјak, Montenegro",
title = "Struktura projekta organizacije građenja",
pages = "2285",
url = "https://hdl.handle.net/21.15107/rcub_grafar_2340"
}

Ivanišević, N., Petronijević, P.,& Ivanišević, N.. (2012). Struktura projekta organizacije građenja. in 4th International conference civil engineering - science and practice, Žablјak, Montenegro
Građevinski fakultet u Podgorici., 2285.
https://hdl.handle.net/21.15107/rcub_grafar_2340

Ivanišević N, Petronijević P, Ivanišević N. Struktura projekta organizacije građenja. in 4th International conference civil engineering - science and practice, Žablјak, Montenegro. 2012;:2285.
https://hdl.handle.net/21.15107/rcub_grafar_2340 .

Ivanišević, Nenad, Petronijević, Predrag, Ivanišević, Nenad, "Struktura projekta organizacije građenja" in 4th International conference civil engineering - science and practice, Žablјak, Montenegro (2012):2285,
https://hdl.handle.net/21.15107/rcub_grafar_2340 .

TY  - CONF
AU  - Petronijević, Predrag
AU  - Ivanišević, Nenad
AU  - Arizanović, Dragan
PY  - 2012
UR  - https://grafar.grf.bg.ac.rs/handle/123456789/2339
AB  - Troškovi depresijacije predstavljaju značajani deo ukupnih troškova rada građevinskih
mašina. Ipak, precizan proračun troškova depresijacije često je težak ili nemoguć.
Metoda ravnomerne depresijacije, koja se najčešće koristi prilikom proračuna troškova
rada građevinskih mašina, ne daje dovoljno tačne rezultate. U radu je analizirano više
metoda proračuna troškova depresijacije, kao i njihov uticaj na ukupne tršokove rada
građevinskih mašina i uticaj na troškove po jedinici mere obrađenog materijala.
PB  - Građevinski fakultet u Podgorici
C3  - 4th International conference civil engineering - science and practice, Žablјak, Montenegro
T1  - Metode proračuna troškova depresijacije građevinskih mašina
SP  - 2445
UR  - https://hdl.handle.net/21.15107/rcub_grafar_2339
ER  - 

@conference{
author = "Petronijević, Predrag and Ivanišević, Nenad and Arizanović, Dragan",
year = "2012",
abstract = "Troškovi depresijacije predstavljaju značajani deo ukupnih troškova rada građevinskih
mašina. Ipak, precizan proračun troškova depresijacije često je težak ili nemoguć.
Metoda ravnomerne depresijacije, koja se najčešće koristi prilikom proračuna troškova
rada građevinskih mašina, ne daje dovoljno tačne rezultate. U radu je analizirano više
metoda proračuna troškova depresijacije, kao i njihov uticaj na ukupne tršokove rada
građevinskih mašina i uticaj na troškove po jedinici mere obrađenog materijala.",
publisher = "Građevinski fakultet u Podgorici",
journal = "4th International conference civil engineering - science and practice, Žablјak, Montenegro",
title = "Metode proračuna troškova depresijacije građevinskih mašina",
pages = "2445",
url = "https://hdl.handle.net/21.15107/rcub_grafar_2339"
}

Petronijević, P., Ivanišević, N.,& Arizanović, D.. (2012). Metode proračuna troškova depresijacije građevinskih mašina. in 4th International conference civil engineering - science and practice, Žablјak, Montenegro
Građevinski fakultet u Podgorici., 2445.
https://hdl.handle.net/21.15107/rcub_grafar_2339

Petronijević P, Ivanišević N, Arizanović D. Metode proračuna troškova depresijacije građevinskih mašina. in 4th International conference civil engineering - science and practice, Žablјak, Montenegro. 2012;:2445.
https://hdl.handle.net/21.15107/rcub_grafar_2339 .

Petronijević, Predrag, Ivanišević, Nenad, Arizanović, Dragan, "Metode proračuna troškova depresijacije građevinskih mašina" in 4th International conference civil engineering - science and practice, Žablјak, Montenegro (2012):2445,
https://hdl.handle.net/21.15107/rcub_grafar_2339 .

TY  - JOUR
AU  - Petronijević, Predrag
AU  - Ivanišević, Nenad
AU  - Rakočević, Marina
AU  - Arizanović, Dragan
PY  - 2012
UR  - https://grafar.grf.bg.ac.rs/handle/123456789/431
AB  - Depreciation expenses represent a significant part of total expenses of construction machinery. Precise calculation of depreciation expenses is often difficult or impossible. Straight line method of depreciation, which is commonly used in the calculation of ownership costs of construction machinery, does not give accurate results. This paper analyzes methods of depreciation expenses calculation, as well as their impact on the overall expanses of construction machinery and the impact on the cost per unit of material processed.
AB  - Troškovi depresijacije predstavljaju značajni deo ukupnih troškova rada građevinskih mašina. Ipak, precizan proračun troškova depresijacije često je težak ili nemoguć. Metoda ravnomerne depresijacije, koja se najčešće koristi prilikom proračuna troškova rada građevinskih mašina, ne daje dovoljno tačne rezultate. U radu je analizirano više metoda proračuna troškova depresijacije, kao i njihov uticaj na ukupne troškove rada građevinskih mašina i uticaj na troškove po jedinici mere obrađenog materijala.
PB  - Institut za istraživanja i projektovanja u privredi, Beograd
T2  - Journal of Applied Engineering Science
T1  - Methods of calculating depreciation expenses of construction machinery
T1  - Metode proračuna troškova depresijacija građevinskih mašina
EP  - 48
IS  - 1
SP  - 43
VL  - 10
DO  - 10.5937/jaes10-1664
ER  - 

@article{
author = "Petronijević, Predrag and Ivanišević, Nenad and Rakočević, Marina and Arizanović, Dragan",
year = "2012",
abstract = "Depreciation expenses represent a significant part of total expenses of construction machinery. Precise calculation of depreciation expenses is often difficult or impossible. Straight line method of depreciation, which is commonly used in the calculation of ownership costs of construction machinery, does not give accurate results. This paper analyzes methods of depreciation expenses calculation, as well as their impact on the overall expanses of construction machinery and the impact on the cost per unit of material processed., Troškovi depresijacije predstavljaju značajni deo ukupnih troškova rada građevinskih mašina. Ipak, precizan proračun troškova depresijacije često je težak ili nemoguć. Metoda ravnomerne depresijacije, koja se najčešće koristi prilikom proračuna troškova rada građevinskih mašina, ne daje dovoljno tačne rezultate. U radu je analizirano više metoda proračuna troškova depresijacije, kao i njihov uticaj na ukupne troškove rada građevinskih mašina i uticaj na troškove po jedinici mere obrađenog materijala.",
publisher = "Institut za istraživanja i projektovanja u privredi, Beograd",
journal = "Journal of Applied Engineering Science",
title = "Methods of calculating depreciation expenses of construction machinery, Metode proračuna troškova depresijacija građevinskih mašina",
pages = "48-43",
number = "1",
volume = "10",
doi = "10.5937/jaes10-1664"
}

Petronijević, P., Ivanišević, N., Rakočević, M.,& Arizanović, D.. (2012). Methods of calculating depreciation expenses of construction machinery. in Journal of Applied Engineering Science
Institut za istraživanja i projektovanja u privredi, Beograd., 10(1), 43-48.
https://doi.org/10.5937/jaes10-1664

Petronijević P, Ivanišević N, Rakočević M, Arizanović D. Methods of calculating depreciation expenses of construction machinery. in Journal of Applied Engineering Science. 2012;10(1):43-48.
doi:10.5937/jaes10-1664 .

Petronijević, Predrag, Ivanišević, Nenad, Rakočević, Marina, Arizanović, Dragan, "Methods of calculating depreciation expenses of construction machinery" in Journal of Applied Engineering Science, 10, no. 1 (2012):43-48,
https://doi.org/10.5937/jaes10-1664 . .