Cleaner production: power plant wastewater treatment process development

Link to this page

info:eu-repo/grantAgreement/MESTD/Technological Development (TD or TR)/34009/RS//

Cleaner production: power plant wastewater treatment process development (en)
Развој технолошких процеса за третман отпадних вода енергетских постројења применом чистије производње (sr)
Razvoj tehnoloških procesa za tretman otpadnih voda energetskih postrojenja primenom čistije proizvodnje (sr_RS)
Authors

Publications

The removal of Zn2+, Pb2+, and As(V) ions by lime activated fly ash and valorization of the exhausted adsorbent

Karanac, Milica; Dolić, Maja B.; Veljović, Đorđe; Rajaković-Ognjanović, Vladana; Veličković, Zlate; Pavićević, Vladimir; Marinković, Aleksandar

(Elsevier Ltd, 2018)

TY  - JOUR
AU  - Karanac, Milica
AU  - Dolić, Maja B.
AU  - Veljović, Đorđe
AU  - Rajaković-Ognjanović, Vladana
AU  - Veličković, Zlate
AU  - Pavićević, Vladimir
AU  - Marinković, Aleksandar
PY  - 2018
UR  - https://grafar.grf.bg.ac.rs/handle/123456789/937
AB  - This study focuses on the use of raw fly ash (FA) and modified fly ash - activated by lime (MFA), as effective and low-cost adsorbents for the removal of heavy metals (Zn2+, Pb2+ and As(V)), followed by the revalorization of the exhausted adsorbent. The granulometric, elemental analysis, point of zero charge (pH(pzc), radiochemical and structural characterization were conducted using X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), scanning electron microscopy (SEM), Fourier transform infrared (FTIR) and gamma spectrometry techniques. The optimal conditions and key factors influencing the adsorption process were assessed using the response surface method (RSM). The adsorption capacity of the MFA adsorbent for Zn2+, Pb2+ and As(V) removal, calculated by the Langmuir model, was found to be 33.13, 26.06, and 29.71 mg g(-1), respectively. The kinetic and thermodynamic parameters indicated that the adsorption process is spontaneous and endothermic. Due to their low desorption potential of the exhausted adsorbents, their effective reuse was established to be feasible. For this reason, the valorization of this material as an additive in construction materials was thereafter studied, where testing its toxicity leaching (TCLP) as well as the mechanical properties of construction material containing exhausted MFA confirmed its safe use. Hence, this study points to a possible "two-in-one" reuse of coal ash, initially as an adsorbent and later as an additive in a construction material.
PB  - Elsevier Ltd
T2  - Waste Management
T1  - The removal of Zn2+, Pb2+, and As(V) ions by lime activated fly ash and valorization of the exhausted adsorbent
EP  - 378
SP  - 366
VL  - 78
DO  - 10.1016/j.wasman.2018.05.052
ER  - 
@article{
author = "Karanac, Milica and Dolić, Maja B. and Veljović, Đorđe and Rajaković-Ognjanović, Vladana and Veličković, Zlate and Pavićević, Vladimir and Marinković, Aleksandar",
year = "2018",
abstract = "This study focuses on the use of raw fly ash (FA) and modified fly ash - activated by lime (MFA), as effective and low-cost adsorbents for the removal of heavy metals (Zn2+, Pb2+ and As(V)), followed by the revalorization of the exhausted adsorbent. The granulometric, elemental analysis, point of zero charge (pH(pzc), radiochemical and structural characterization were conducted using X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), scanning electron microscopy (SEM), Fourier transform infrared (FTIR) and gamma spectrometry techniques. The optimal conditions and key factors influencing the adsorption process were assessed using the response surface method (RSM). The adsorption capacity of the MFA adsorbent for Zn2+, Pb2+ and As(V) removal, calculated by the Langmuir model, was found to be 33.13, 26.06, and 29.71 mg g(-1), respectively. The kinetic and thermodynamic parameters indicated that the adsorption process is spontaneous and endothermic. Due to their low desorption potential of the exhausted adsorbents, their effective reuse was established to be feasible. For this reason, the valorization of this material as an additive in construction materials was thereafter studied, where testing its toxicity leaching (TCLP) as well as the mechanical properties of construction material containing exhausted MFA confirmed its safe use. Hence, this study points to a possible "two-in-one" reuse of coal ash, initially as an adsorbent and later as an additive in a construction material.",
publisher = "Elsevier Ltd",
journal = "Waste Management",
title = "The removal of Zn2+, Pb2+, and As(V) ions by lime activated fly ash and valorization of the exhausted adsorbent",
pages = "378-366",
volume = "78",
doi = "10.1016/j.wasman.2018.05.052"
}
Karanac, M., Dolić, M. B., Veljović, Đ., Rajaković-Ognjanović, V., Veličković, Z., Pavićević, V.,& Marinković, A.. (2018). The removal of Zn2+, Pb2+, and As(V) ions by lime activated fly ash and valorization of the exhausted adsorbent. in Waste Management
Elsevier Ltd., 78, 366-378.
https://doi.org/10.1016/j.wasman.2018.05.052
Karanac M, Dolić MB, Veljović Đ, Rajaković-Ognjanović V, Veličković Z, Pavićević V, Marinković A. The removal of Zn2+, Pb2+, and As(V) ions by lime activated fly ash and valorization of the exhausted adsorbent. in Waste Management. 2018;78:366-378.
doi:10.1016/j.wasman.2018.05.052 .
Karanac, Milica, Dolić, Maja B., Veljović, Đorđe, Rajaković-Ognjanović, Vladana, Veličković, Zlate, Pavićević, Vladimir, Marinković, Aleksandar, "The removal of Zn2+, Pb2+, and As(V) ions by lime activated fly ash and valorization of the exhausted adsorbent" in Waste Management, 78 (2018):366-378,
https://doi.org/10.1016/j.wasman.2018.05.052 . .
41
23
43