Претраживање
Приказ резултата 1-10 од 23
Physical and mechanical properties of hemp fibre reinforced alkali-activated fly ash and fly ash/slag mortars
(Elsevier Ltd., 2020)
Two alkali-activated mortars with different solid prime materials were analysed. The first mortar contained fly ash, had lower density, higher water absorption, lower compactness, lower compressive strength, similar flexural ...
Structural response to axial testing of cold-formed stainless steel angle columns
(Thin-Walled Structures, 2020)
In this paper, the structural stability and compressive capacity of pin-ended cold-formed stainless steel angle columns with different slenderness were experimentally investigated. The experimental programme was performed ...
Capturing dam geometry by Lidar and multibeam technology for visualization of structural deformations - Case study Dam Bečej
(Department of Surveying, Faculty of Civil Engineering, Slovak University of Technology in BratislavaCroatian Geodetic Society, ZagrebFaculty of Geodesy, University of Zagreb, Croatia, 2020)
Bečej Dam is a concrete dam on the Tisa River, which has been monitored since the 1980s through the monitoring of point-mark position vector changes on the dam body in 2D and 1D coordinate system. Conventional geodetic ...
Bridge damage: Detection, IFC-based semantic enrichment and visualization
(Elsevier, 2020)
Building Information Modeling (BIM) representations of bridges enriched by inspection data will add tremendous value to future Bridge Management Systems (BMSs). This paper presents an approach for point cloud-based detection ...
The contemporary visualization and modelling technologies and techniques for the design of the green roofs
(Serbian Society for Geometry and Graphics (SUGIG) Faculty of Mechanical Engineering, University of Belgrade, 2020)
The contemporary design solutions are merging the boundaries between real and virtual
world. The Landscape architecture like the other interdisciplinary field stepped in a contemporary
technologies area focused on that, ...
Geometric proportional model of the church of the Ljubostinja monastery
(University of Arts in Belgrade Faculty of Applied Arts Kralja Petra 4, Belgrade,Serbia, 2020)
The use of proportions is one of the oldest theoretical issues in architecture. However, sometimes geometry, with its specific shapes and constraints
between them, can fully describe the logic of architectural design. ...
Biomimetic Approach to Parametric Flower Modeling
(Advances in Intelligent Systems and Computing book series (AISC, volume 1296); Conference proceedings ICGG 2020, 2020)
Biodesign means life, living forms, it’s often associated with organic shapes and patterns and it has its wide use in landscape architecture. In the past few decades, there has been a great deal of progress in the study ...
Towards a codified design of recycled aggregate concrete structures: background for the new fib Model Code 2020 and Eurocode 2
(Wiley-Blackwell, 2020)
The use of recycled aggregate (RA) to produce recycled aggregate concrete (RAC) is a proven way of decreasing the consumption of natural aggregate (NA) and landfilling of construction and demolition waste. However, adoption ...
Dynamic stiffness – based free vibration study of open circular cylindrical shells
(Elsevier, 2020)
In this paper, the dynamic stiffness method has been applied in the free vibration analysis of open circular cylindrical shells based on Flügge thin shell theory. The dynamic stiffness matrix for a completely free open ...
The role of service life in Life Cycle Assessment of concrete structures
(Elsevier Ltd, 2020)
In comparative Life Cycle Assessment (LCA) of concrete structures it is of crucial importance to provide the functional equivalence of compared alternatives. Most commonly, the comparison is performed between the structures ...