Претраживање
Приказ резултата 41-50 од 123
Properties of two collinear spaces where common tetrahedron is irregular-orthocentric
(International Society for Geometry and Graphics, 2008)
Horizontal coordinates transformation and residuals modelling on the territory of the Republic of Srpska
(Taylor & Francis, 2020)
The paper describes the optimal model for coordinate transformation between ETRS89 and old national reference system in the Republic of Srpska. The Helmert`s parameters were estimated, based on a set of 1 741 common points. ...
Quantitative assessment of the parameters linked to the blending between reclaimed asphalt binder and recycling agent: A literature review
(Elsevier, 2020)
The lack of understanding the mechanisms governing the interaction between reclaimed asphalt binder (RAb)1 and recycling agents is one of the technical issues that still need to be resolved when high amount of reclaimed ...
Adverse-slope stilling basins: machine learning approach to estimation of hydraulic jump features
(SDHI/SDH, 2018)
Stilling basins are the most commonly used energy dissipating structure for large dams, due to their high operating reliability under a wide range of inflow conditions. However, unsatisfactory tailwater conditions, primarily ...
Measurements, calibration of rainfall-runoff models and assessment of the return period of flooding events at urban catchment Kumodraž in Belgrade
(IWA Publishing, 2002)
For the purpose of re-design and improvement of the combined sewer system at the Kumodraz catchment in Belgrade, measurements of rainfall and runoff at the catchment were established in late 1997. Observed data are used ...
Behaviour of stainless steel plain channel section columns
(Thin-Walled Structures, 2020)
In this paper, the structural stability of cold-formed stainless steel plain channel columns under axial compression is investigated. Reliable finite element models for channel section columns are first ...
Biodesign inspired by the leaf and flower of dandelion (leontodon taraxacum l.)
(Published by the AFGS2021 Organizing Committee, 2021)
Bionics is a scientific field that studies the laws of origin and structure of "living"
nature in combination with knowledge of biology and technology. By applying bionics, sustainable solutions and answers to the great ...
Digital bio-transformations inspired by plants: urban installation as 3d model inspired by sketch of spathodea campanulata p. beauv (nandi flame)
(Faculty of Applied Arts, University of Arts in Belgrade, Serbia, 2021)
The field of biodesign, as an art and scientific discipline, deals with the exploration of the principles of organization and functioning of living organisms and the practical application of the acquired knowledge in ...
Physical and mechanical properties of hemp fibre reinforced alkali-activated fly ash and fly ash/slag mortars
(Elsevier Ltd., 2020)
Two alkali-activated mortars with different solid prime materials were analysed. The first mortar contained fly ash, had lower density, higher water absorption, lower compactness, lower compressive strength, similar flexural ...
Structural response to axial testing of cold-formed stainless steel angle columns
(Thin-Walled Structures, 2020)
In this paper, the structural stability and compressive capacity of pin-ended cold-formed stainless steel angle columns with different slenderness were experimentally investigated. The experimental programme was performed ...