Претраживање
Приказ резултата 51-60 од 64
Corrosion of cannon 75/27, model 1911. déport, from the collection of the Military Museum in Belgrade / Korozija topa 75/27, model 1911. deport iz kolekcije Vojnog muzeja u Beogradu
(Univerzitet u Beogradu - Mašinski fakultet, Beograd, 2012)
This paper analyzes the state of the French Cannon 75/27 model 1911. Déport made of steel. The amount of non-corroded materials, the presence of cracks and other defects in the cannon were determined by the radiographic ...
The analysis of application of secondary seismic elements in design according to Eurocode 8 / Analiza primene sekundarnih seizmičkih elemenata u proračunu prema Evrokodu 8
(Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije, Beograd, 2017)
Analysis of conceptual design of reinforced concrete (RC) structure with secondary seismic elements in compliance with Eurocode 8 is presented in this paper. The application of this concept is complex due to the requirements ...
Physical-mechanical properties and durability of Ultra-high Performance Concrete (UHPC)
(Society for Materials and Structures Testing of SerbiaUniversity of Belgrade, Faculty of Civil EngineeringAssociation of Structural Engineers of Serbia, 2021)
This paper presents the results of the authors' laboratory testing of physical,
mechanical and durability properties of Ultra-high Performance Concrete (UHPC).
The short history of development and application of UHPC ...
Urban mining potential in Serbia: Case study of residential building material stock
(Building Materials and Structures, 2022)
As governments worldwide attempt to develop sustainable waste management strategies, massive amounts of waste have been accumulating. However, developing an effective waste management strategy requires a thorough understanding ...
Influence of cement replacement with limestone filler on the properties of concrete
(Građevinski materijali i konstrukcije, 2021)
This paper presents an experimental research of one type of green concrete in which Portland cement was replaced with two types of limestone filler of the same origin and mineralogical composition, but with a different ...
Experimental testing of reinforced end-notched glulam beams / Eksperimentalno ispitivanje ojačanih lepljeno lameliranih drvenih nosača sa redukovanom visinom preseka
(Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije, Beograd, 2018)
Notches made at the ends of timber beams significantly decrease load carrying capacity of a structural member. This paper presents an experimental research on bending behaviour of end-notched glulam beams, with and without ...
Elastic critical load of plates and plate girders subjected to patch load / Elastična kritična sila ploča i limenih nosača pod dejstvom lokalizovanog opterećenja
(Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije, Beograd, 2018)
The determination of the elastic critical load (buckling load) is an important element of the assessment of the ultimate load of plate girders according to Eurocode 3 for design of steel structures. An analysis of the ...
Polyhedral Forms Obtained by Combinig Lateral Sheet of CP II-10 and Truncated Dodecahedron
(Beograd:University of Belgrade, Faculty of Mechanical Engineering, 2017)
The paper analyzes the possibility of obtaining polyhedral shapes formed by combining polyhedral surfaces based on the segment surface of elongated concave pyramids of the second sort (CeP II-10, type A and type B). In ...
On the properties of the concave antiprisms of second sort / O osobinama konkavnih antiprizmi druge vrste
(Univerzitet u Beogradu - Mašinski fakultet, Beograd, 2013)
The paper examines geometrical, static and dynamic properties of the polyhedral structures obtained by folding and creasing the two-rowed segment of equilateral triangular net. Bases of these concave polyhedra are regular, ...
The pencil of the 4th and 3rd order surfaces obtained as a harmonic equivalent of the pencil of quadrics through a 4th order space curve of the 1st category / Pramen površi 4. i 3. reda dobijen kao harmonijski ekvivalent pramena kvadrika kroz prostornu krivu 4. reda 1. vrste
(Univerzitet u Nišu, Niš, 2012)
This paper shows the process of inverting the 4th ordered space curve of the first category with a self-intersecting point (with two planes of symmetry) and determining its harmonic equivalent. There are harmonic equivalents ...