Pretraživanje
Prikaz rezultata 1-10 od 54
Digital bio-transformations inspired by plants: urban installation as 3d model inspired by sketch of spathodea campanulata p. beauv (nandi flame)
(Faculty of Applied Arts, University of Arts in Belgrade, Serbia, 2021)
The field of biodesign, as an art and scientific discipline, deals with the exploration of the principles of organization and functioning of living organisms and the practical application of the acquired knowledge in ...
Capturing dam geometry by Lidar and multibeam technology for visualization of structural deformations - Case study Dam Bečej
(Department of Surveying, Faculty of Civil Engineering, Slovak University of Technology in BratislavaCroatian Geodetic Society, ZagrebFaculty of Geodesy, University of Zagreb, Croatia, 2020)
Bečej Dam is a concrete dam on the Tisa River, which has been monitored since the 1980s through the monitoring of point-mark position vector changes on the dam body in 2D and 1D coordinate system. Conventional geodetic ...
Technical and Environmental Aspects of Infrastructure Restoration after Destruction of Bridges in the City of Novi Sad
(International Conference on Environmental Recovery of Yugoslavia – ENRY2001, 2001)
This paper deals with the riverbed morphological and environmental changes induced by destruction of bridges in the city of Novi Sad. Different aspects of infrastructure restoration are discussed. The problem of gas pipeline ...
Carbonation resistance of high volume fly ash concrete estimated with accelerated and natural tests
(4th RILEM International Conference on Service Life Design for Infrastructures, 2018)
The reuse of industrial residue streams such as fly ash (FA) can be beneficial both from economic and ecological points of view but the durability properties remain the key properties to ensure sustainable application of ...
Interpreting parametric-biomimicry design from cad тo bim software: digital modelling based on a sketch of nandi flame
(Serbian Society for Geometry and Graphics (SUGIG) Faculty of Mechanical Engineering, University of Belgrade, 2021)
This research represents an application of two digital modelling softwares, first digital modelling software, chosen as representative of Computer-Aided Design – CAD modelling tool was Fusion 360. The representative of ...
Biomimetic approach to parametric flower modeling
(19th International Conference on Geometry and Graphics 2021 ISGG, São Paulo, Brazil, 2021)
A sustainable design based on biomimicry can still fulfill the functional needs of humans and be
visually satisfying by representing man's connection to nature. Biomorphic means life, living forms,
it’s often associated ...
Properties of two collinear spaces where common tetrahedron is irregular-orthocentric
(International Society for Geometry and Graphics, 2008)
The contemporary visualization and modelling technologies and techniques for the design of the green roofs
(Serbian Society for Geometry and Graphics (SUGIG) Faculty of Mechanical Engineering, University of Belgrade, 2020)
The contemporary design solutions are merging the boundaries between real and virtual
world. The Landscape architecture like the other interdisciplinary field stepped in a contemporary
technologies area focused on that, ...
Geometric proportional model of the church of the Ljubostinja monastery
(University of Arts in Belgrade Faculty of Applied Arts Kralja Petra 4, Belgrade,Serbia, 2020)
The use of proportions is one of the oldest theoretical issues in architecture. However, sometimes geometry, with its specific shapes and constraints
between them, can fully describe the logic of architectural design. ...
Integrating BIM into construction project management education at the Faculty of Civil Engineering in Belgrade
(2019)
The development of information technology and communication means has a great
influence on the way construction projects are prepared and delivered. One of the latest trends
in digitalization in construction bringing ...