Претраживање
Приказ резултата 281-290 од 291
Experimental determination of R curves for European spruce using DCB tests
(Proceedings from the 13th World Conference on Timber Engineering 2023, Oslo, 2023)
This paper presents an experimental procedure for obtaining the fracture resistance (R curve) of solid wood specimens made of spruce. Double Cantilever Beam (DCB) tests were performed in order to determine energy release ...
Geometric approach to the revitalization process of the medieval Serbian monasteries
(Vilnius Gediminas Technical University, 2015)
Among the standard approaches concerning cultural heritage preservation, the architectural point of view deserves particular attention. The special place in medieval Serbian history of architecture belongs to the world ...
Climate change in Serbia and adaptation measures in the field of water resources management
(Slovenian Committee on Large DamsMacedonian Committee on Large Dams, 2020)
The paper presents the actual situation in the field of water, especially water as a resource. With an average amount of domestic water of about 1700 m3 per capita per year, Serbia is one of the poorest countries in Europe. ...
Preliminary Analysis and Monitoring of the Rock Slope on the M-22 Highroad Near Ljig in Serbia, Using LiDAR Data
(Springer International Publishing, Cham, 2015)
In this research terrestrial LiDAR scanning has been used for building high-resolution point clouds of a rock slope site on the M-22 highroad near Ljig in Serbia. The scanning has been conducted in two epochs in the past ...
Calibration of the high strenght bolts for measuring of the pretension force
(International Conference on ADVANCES IN STEEL STRUCTURES, Lisbon, Portugal, July 22-24, 2015., 2015)
When analysing slip resistance connections, which are commonly used in-situ assemblied joints of structures dominantly loaded by cyclic loading, for example in bridges, telecommunication towers, towers for wind turbines, ...
A digital solution for unlocking the urban mining potential of the residential building stock through the integration of BIM and GIS
(Conference on interdisciplinary and transdisciplinary research for sustainable development, 2022)
The construction industry consumes up to half of the excavated primary resources and
generates one-third of total waste annually, impacting the environment and society. To
reduce this impact, maintaining the primary ...
Geometry as a common ground for BMS and BIM
(IABSE Symposium, Prague 2022: Challenges for Existing and Oncoming Structures, 2022)
Bridge Management Systems (BMSs) are sophisticated software tools, widely used for managing bridges. Comprising a centralized database of all relevant information for the entire bridge stock and analytics to forecast ...
2010 Kraljevo Earthquake Recovery Process Metrics Derived from Recorded Reconstruction Data
(16th European Conference on Earthquake Engineering, 2018)
Earthquake resilience starts with a sudden drop of performance when an earthquake strikes followed by a relatively long recovery phase. The dynamics and volume of investment directly affect the rate and level of recovery. ...
Determinations of the preliminary coordinates for the new GNSS permanent station network in Serbia
(SGEM, 51 Alexander Malinov blvd, Sofia, 1712, Bulgaria, 2022)
The new network of permanent GNSS (Global Navigation Satellite System) stations should be established by the end of this year. At the moment, 18 permanent stations are already established. All stations coordinates must be ...
Efficient discretization of circular cross-section in fiber beam/column element
(The 16th International Conference on Civil, Structural & Environmental Engineering Computing, Riva del Garda, Italy, 2019)