Претраживање
Приказ резултата 251-260 од 291
Method for water distribution systems reliability evaluation
(International Environmental Modelling and Software Societey, 2004)
A new methodology for water resources systems reliability evaluation is presented. The proposed methodology considers both: mechanical reliability (probability of pipe failure) and reliability of hydraulic parameters in ...
The influence of exposure on wind flow characteristics around a high-rise building
(Editura Conspress, 2022)
This study uses validated Large-eddy simulations to investigate the impact of the building exposure on the flow field around the principal building placed in the turbulent atmospheric boundary layer. The prismatic 1:3 ...
Importance of numerical algorithm for stress integration in the application of elastoplastic soil models for geotechnical problems
(Fifth Symposium of the Society for Geotechnics of Macedonia, DGM, 2022, 2022)
The mathematical formulation of the constitutive equations is expressed through a set of differential nonlinear equations. The incrementally-iterative procedures are mainly used for solving material nonlinear problems by ...
Advance design methods of steel structurs based on Eurocode 3
(Macedonian association of structural engineers, 2022)
Eurocode introduces innovations in the design of steel structures that create new opportunities for
designers and contractors to construct more attractive and cost-effective structures. The paper present a new approach ...
Generating Curves of Higher Order Using the Generalisation of Hügelschäffer’ Egg Curve construction
(Timişoara: Editura Politehnica, 2013)
The starting constructions is the well known ellipse construction using the concentric circles c1 and c2. By eccentricity of the center C2 for some value w, and for the preserved center of the transformation in the center ...
Free vibration analysis of curved spatial Bernoulli-Euler beam with circular cross section using isogeometric approach
(2019)
In this paper the linear free vibration analysis of an arbitrarily curved spatial Bernoulli – Euler beam with circular cross section using isogeometric approach has been presented. In order to carry out free vibration ...
A Comparative Study of ML and FEM Models for the Prediction of Seismic Structural Behavior
(International Conference Natural Resources and Environmental Risks: Towards a Sustainable Future, Building of Branch of the Serbian Academy of Sciences and Arts in Novi Sad, Serbia, 2023)
During the last several decades, the finite element method (FEM) is the most commonly used numerical method for performing seismic structural analysis. It requires careful structural modeling, but also the adjustment of ...
Optimal waste cooking oil dosage in blends containing aged binder
(CRC Press/Balkema, 2018)
This paper focuses on the influence of Waste Cooking Oil (WCO), as an alternative recycling agent, on physical and rheological properties of blends containing aged binder recovered from Reclaimed Asphalt Pavement (RAP). ...
Experimental determination of R curves for European spruce using DCB tests
(Proceedings from the 13th World Conference on Timber Engineering 2023, Oslo, 2023)
This paper presents an experimental procedure for obtaining the fracture resistance (R curve) of solid wood specimens made of spruce. Double Cantilever Beam (DCB) tests were performed in order to determine energy release ...
Geometric approach to the revitalization process of the medieval Serbian monasteries
(Vilnius Gediminas Technical University, 2015)
Among the standard approaches concerning cultural heritage preservation, the architectural point of view deserves particular attention. The special place in medieval Serbian history of architecture belongs to the world ...