Претраживање
Приказ резултата 31-40 од 324
3D numerical simulation of cross-levee breaching process due to overtopping flow
(CRC Press/Balkema, 2016)
Dike failures due to overtopping flows cause severe damages. For risk management, it is of great importance to understand the mechanism of dike failure and predict flows and sediment transport in the breaching process ...
Investigation of the seismic behaviour of structural and non-structural components in industrial facilities by means of shaking table tests
(SEDIF 2020 – 2nd International Conference on Seismic Design of Industrial Facilities, 2020)
Industrial facilities consist of the primary load-carrying structure and various process engineering components (secondary structures), which under seismic loading, may exhibit significant damage that may threaten their ...
Seismic performance of multiple-component systems in special risk industrial facilities
(17th World Conference on Earthquake Engineering, 2020)
Past earthquakes demonstrated the high vulnerability of industrial facilities equipped with complex process technologies leading to serious damage of the process equipment and multiple and simultaneous release of hazardous ...
Coupling field and satellite data for an event-based landslide inventory
(Taylor and Francis Inc., 2016)
Following the extreme precipitation and flooding, western and central parts of Serbia suffered massive landsliding at unprecedented rates in mid May 2014. Due to a lack of national landslide inventory and institutional ...
Geoid determination in Serbia
(Adria Microplate GPS Geodesy, Tectonics and Hazards, 2006)
At the end of 2003, a preliminary geoid of Serbia was determined by fitting the gravimetric geoid into undulations determined by GPS and leveling (GPS/dh) techniques. The gravimetric geoid was determined using data from ...
Fiber optic sensor applications for structural health monitoring
(Zbornik radova / Treći srpski kongres o putevima, 2018)
The monitoring of civil and geotechnical structures requires a variety of different measurement tasks that require different types of sensing systems. Fiber optic sensors can be used in a variety of applications and many ...
Vibrations of Massless Flexible Strip on Visco-Elastic Half-Space
(7th International Congress of Serbian Society of Mechanics, 2019)
This paper deals with the analysis of the dynamic response of the flexible strip foundation resting on the surface of the soil. Plane strain steady state analysis is considered. The cross section of the foundation behaves ...
Railway/Road Level Crossing Design - Aspect of Safety and Environment
(Springer Verlag, 2018)
At the railway/road level crossings, two essentially different modes of transport intersect, both with a variety of vehicle performance parameters and traffic organization rules. Level crossing presents a collision zone ...
Experimental analysis of structural damping for bolted and welded splice connection join for IPE-80 steel profile
(University of Banja Luka Faculty of Architecture, Civil Engineering and Geodesy, 2020)
Progress and demands of all types of constructions imposed the need for the development of modern structures that are lightweight, but at the same time have high damping capacity and stiffness. The consequences of these ...
Role of bed elevation discordance at 90 degrees straight-channel confluences
(River Flow 2012, Vols 1 and 2, 2012)
This paper aims at studying the role of difference in bed elevations between the tributary and main canals (Delta z(T)) in 90 degrees confluence under different hydrologic/hydraulic conditions. To do this, 3D finite-volume ...