Претраживање
Приказ резултата 81-90 од 857
Laboratory investigation of hydraulic characteristics of fly ash as a fill material from the aspects of pollutant transport
(IWA Publishing, 2017)
Depending on the usage of fly ash, it is necessary to determine its environmental parameters, such as the potential for pollutant transport/leaching after its built-in. This study presents a methodology for determination ...
Basic kinematic analysis of rock slope using terrestrial 3D laser scanning on the M-22 highroad pilot site
(Taylor & Francis Group, London, 2013)
Terrestrial laser scanning has propelled recent advancements in rock slope engineering. Building models with millions of points to discretize an actual slope has provided resolutions which empower computerbased ...
On a generalized Jordan normal form of an infinite upper triangular matrix
(Taylor & Francis Ltd, United Kingdom, 2019)
Any square matrix over an algebraically closed field has a Jordan normal form. In this paper, we prove that every infinite upper triangular matrix over an arbitrary field has a generalized infinite Jordan normal form.
Vertical Vibrations of Rectangular Flexible Foundation on Viscoelastic Halfspace
(Scientific Journal of Civil Engineering (SJCE), 2019)
This paper presents a novel method, ITM- DSM, for the soil-foundation interaction problems analysis. It is a semi-numerical method based on the coupling of the Integral Transform Method (ITM) and the Dynamic Stiffness ...
The validation of stormwater biofilters for micropollutant removal using in situ challenge tests
(Elsevier, 2014)
Stormwater harvesting is becoming a popular alternative water resource in water stressed regions. Stormwater biofilters have been recognized as being among the most promising pre-treatment technologies. In this study, a ...
Sensitivity Analysis of a Physically Based Distributed Model
(Springer Netherlands, 2016)
The objective of this study is to perform a sensitivity analysis of the SHETRAN model on the example of the torrential Lukovska River catchment in Serbia. The sensitivity analysis of the model was performed for the following ...
3D numerical simulation of cross-levee breaching process due to overtopping flow
(CRC Press/Balkema, 2016)
Dike failures due to overtopping flows cause severe damages. For risk management, it is of great importance to understand the mechanism of dike failure and predict flows and sediment transport in the breaching process ...
Furthering knowledge on the flow pattern around high-rise buildings: LES investigation of the wind energy potential
(Elsevier, 2022)
To understand the favourable locations for maximum yield of urban wind energy, understanding the flow pattern on the roof region of high-rise buildings is crucial. However, very few studies in the literature report on the ...
Investigation of the seismic behaviour of structural and non-structural components in industrial facilities by means of shaking table tests
(SEDIF 2020 – 2nd International Conference on Seismic Design of Industrial Facilities, 2020)
Industrial facilities consist of the primary load-carrying structure and various process engineering components (secondary structures), which under seismic loading, may exhibit significant damage that may threaten their ...
Dynamic analysis of steel frames with flexible connections
(Elsevier Ltd, 2002)
This paper deals with the effects of flexibility and damping in the nodal connections on the dynamic behavior of plane steel frames, A flexible eccentric connection is idealized by nonlinear rotational spring and dashpot ...