Претраживање
Приказ резултата 1-5 од 5
Calibration of a 1D/1D urban flood model using 1D/2D model results in the absence of field data
(Water Science and Technology, 2011)
Recently increased flood events have been prompting researchers to improve existing coupled flood-models such as one-dimensional (1D)/1D and 1D/two-dimensional (2D) models. While 1D/1D models simulate sewer and surface ...
Measurement, calibration of rainfall-runoff models and assessment of the return period of flooding events at urban catchment Kumodraz in Belgrade
(IWA Publishing, 2002)
For the purpose of re-design and improvement of the combined sewer system at the Kumodraz catchment in Belgrade, measurements of rainfall and runoff at the catchment were established in late 1997, Observed data are used ...
Calibration of the bolt pretension by strain gauges vs. FEA
(MASE - Macedonian Association of Structural Engineers Faculty of Civil Engineering, Skopje, Republic of Macedonia, 2015)
When applying high strength bolts in friction connections, in such case a load–bearing capacity depends on a pretension force in the bolts as well as on a friction coefficient found on friction surfaces. It is important ...
Procedures and Experiences on Using Desktop Scanner for Orthophoto Production
(International Society for Photogrammetry and Remote SensingCenkler Matbaasi,Istambul, 2004)
Paper presents procedures and experiences on using low cost desktop scanner Epson Expression 1640XL for orthophoto production.Complete process of scanning, scanner calibration and removal of systematic distortions of scanned ...
Calibration of the high strenght bolts for measuring of the pretension force
(International Conference on ADVANCES IN STEEL STRUCTURES, Lisbon, Portugal, July 22-24, 2015., 2015)
When analysing slip resistance connections, which are commonly used in-situ assemblied joints of structures dominantly loaded by cyclic loading, for example in bridges, telecommunication towers, towers for wind turbines, ...