Претраживање
Приказ резултата 1-10 од 877
Numerical modelling of simultaneous overtopping and seepage flows with application to dike breaching
(Journal of Hydraulic Research, 2019)
Lossless Compression of Vibration Signals on an Embedded Device Using a TDE Based Predictor
(Kauno Technologijos Universitetas, 2016)
A lossless compression scheme for the data acquired from three-axial microelectromechanical (MEMS) accelerometer is presented. Time delay estimation (TDE) was applied in conjunction with differential pulse code modulation ...
Hybrid approach for two dimensional damage localization using piezoelectric smart aggregates
(Elsevier Ltd, 2017)
In the paper, a novel approach for damage localization in reinforced concrete plates, based on the computational analysis of piezoelectric smart aggregates, has been presented. The hybrid approach for damage localization ...
An improved analysis of free torsional vibration of axially loaded thin-walled beams with point-symmetric open cross-section
(Elsevier Inc., 2016)
The objective of the paper is to analyze the influence of bimoment induced by constant axial loads on the free motion of thin-walled beams with point-symmetric open cross-section. For various boundary conditions, a closed-form ...
Development and application of numerical method in open channel flow in boundary fitted coordinate system with density function method
(Journal of Japan Society of Civil Engineers, Ser. B1 (Hydraulic Engineering), 2016)
Identification of movements using different geodetic methods of deformation analysis
(Geodetski vestnik, 2015)
This paper is based on comparative analysis of applied analysis methods on geodetic networks deformation, based on two-dimensional components of GNSS baseline vectors simulated by two epochs, for the purpose of identifying ...
The removal of Zn2+, Pb2+, and As(V) ions by lime activated fly ash and valorization of the exhausted adsorbent
(Elsevier Ltd, 2018)
This study focuses on the use of raw fly ash (FA) and modified fly ash - activated by lime (MFA), as effective and low-cost adsorbents for the removal of heavy metals (Zn2+, Pb2+ and As(V)), followed by the revalorization ...
Numerical modelling of supercritical flow in circular conduit bends using SPH method
(China Ocean Press, 2017)
The capability of the smoothed-particle hydrodynamics (SPH) method to model supercritical flow in circular pipe bends is considered. The standard SPH method, which makes use of dynamic boundary particles (DBP), is supplemented ...
Synthesis and performance of polymer based magnetic composite sensing element
(Digest Journal of Nanomaterials and Biostructures, 2015)
The commercial multi-mode optical fiber was coated with magnetic composite material prepared using Nd-Fe-B permanent magnet powder dispersed in poly (ethylene-co-vinyl acetate)-EVA. Characterization of microstructure, ...
Ductility of different types of shear connectors – experimental and numerical analysis
(Czech Technical University in Prague, 2019)
Different types of shear connectors, which are used for achievement of steel-concrete
composite action, have been developed during decades. Their suitability for various range
of structures and loadings is determined by ...