Претраживање
Приказ резултата 1-10 од 204
Dynamic calibration in hydrologic and hydraulic modelling: exploring the potential of data assimilation for estimation of models' parameters
(SimHydro 2023: New modelling paradigms for water issues?, Chatou, 8-10. November 2023, 2023)
Hydrological and hydraulic models used for forecasting and providing reliable inputs are essential for effective water management. Throughout their application, models might produce results of unsatisfying accuracy due to ...
Challenges and potential of fiber optic sensors for structural health monitoring of bridges: a review
(MASE - Macedonian Association of Structural Engineers Faculty of Civil Engineering, Blvd. Partizanski odredi No. 24 P.Box. 560, 1000 Skopje, Republic of North Macedonia, 2023)
Structural health monitoring (SHM) has gained significant attention in the field of civil engineering due to effective maintenance of structures, particularly bridges. However, traditional SHM methods have limitations in ...
Influence of slab deflection on the out-of-plane capacity of unreinforced masonry partition walls
(Engineering Structures, 2023)
Severe damage of non-structural elements is noticed in previous earthquakes, causing high economic losses and posing a life threat for the people. Masonry partition walls are one of the most commonly used non-structural ...
Transfer learning approach based on satellite image time series for the crop classification problem
(Springer, 2023)
This paper presents a transfer learning approach to the crop classification problem based on time series of images from the Sentinel-2 dataset labeled for two regions: Brittany (France) and Vojvodina (Serbia). During ...
Effect of Inter-panel Connections on Modal Properties of Cross-Laminated Timber Floors
(International Conference on Experimental Vibration Analysis for Civil Engineering Structures EVACE, Politecnico di Milano, Italy, August 30 – September 1, 2023S 2023, 2023)
Cross-laminated timber (CLT) floors are typically composed of prefabricated CLT panels assembled on a construction site. The actual connections are commonly disregarded at design stage. CLT floors are modelled either as a ...
Damage of masonry infilled RC structures in February 2023 earthquakes sequence in Turkey. Decoupled infill as a solution for better behaviour
(Departman za građevinarstvo i geodeziju, Fakulteta tehničkih nauka, Univerziteta u Novom Sadu, 2023)
The predominant form of damage observed during the February 2023 earthquakes in Turkey was the extensive failure of infill walls. This paper offers an insight into the repercussions of these earthquakes on infills, as well ...
Agricultural Land Use Changes as a Driving Force of Soil Erosion in the Velika Morava River Basin, Serbia
(MDPI, 2023)
The erosion potential model was applied to estimate the soil erosion status of rural settlements during the years 1971 and 2011. We used univariate and bivariate local Moran’s I indices to detect and visualize the spatial ...
Early Highway Construction Cost Estimation: Selection of Key Cost Drivers
(MDPI, 2023)
Cost estimates in the early stages of project development are essential for making the right deci-sions, but they are a huge challenge and risk for owners and potential contractors due to limited information about the ...
Behaviour of demountable steel-concrete composite beams with bolts and headed studs
(Ernst & Sohn GmbH, 2023)
Implementation of demountable beams in steel-concrete composite floors enables
structure reuse during several life cycles, consequently leading to savings in material
consumption and reduction of emissions, providing ...
Bending behaviour of cross laminated timber panels made from locally sourced spruce wood
(MASE - Macedonian Association of Structural Engineers, 2023)
Cross laminated timber (CLT) is relatively new engineering wood product made by gluing cross-wise layers of solid timber boards to form large-scale panels. Due to excellent in-plane and out-of-plane resistance, CLT panels ...