Претраживање
Приказ резултата 1-10 од 48
Determination of Mohr-Coulomb Parameters for Modelling of Concrete
(Crystals / MDPI, 2020)
Cohesion is defined as the shear strength of material when compressive stress is zero. This article presents a new method for the experimental determination of cohesion at pre-set angles of shear deformation. Specially ...
Geostatistical modeling of topography using auxiliary maps
(Computers & Geosciences, 2008)
This paper recommends computational procedures for employing auxiliary maps, such as maps of drainage patterns, land cover and remote-sensing-based indices, directly in the geostatistical modeling of topography. The ...
Radiological and material characterization of high volume fly ash concrete
(Journal of Environmental Radioactivity, 2016)
The main goal of research presented in this paper was the material and radiological characterization of high volume fly ash concrete (HVFAC) in terms of determination of natural radionuclide content and radon emanation and ...
The Successful Delivery of Megaprojects: A Novel Research Method
(SAGE Publications Inc., 2017)
Megaprojects are often associated with poor delivery performance and poor benefits realization. This article provides a method of identifying, in a quantitative and rigorous manner, the characteristics related to project ...
Towards a codified design of recycled aggregate concrete structures: background for the new fib Model Code 2020 and Eurocode 2
(Wiley-Blackwell, 2020)
The use of recycled aggregate (RA) to produce recycled aggregate concrete (RAC) is a proven way of decreasing the consumption of natural aggregate (NA) and landfilling of construction and demolition waste. However, adoption ...
Enhanced DEM-based flow path delineation methods for urban flood modelling
(IWA Publishing, 2013)
In order to simulate surface runoff and flooding, one-dimensional (1D) overland flow networks can be automatically delineated using digital elevation models (DEM). The resulting network comprises flow paths and terrain ...
Numerical modelling of supercritical flow in circular conduit bends using SPH method
(China Ocean Press, 2017)
The capability of the smoothed-particle hydrodynamics (SPH) method to model supercritical flow in circular pipe bends is considered. The standard SPH method, which makes use of dynamic boundary particles (DBP), ...
Sharp Bounds for Trigonometric and Hyperbolic Functions with Application to Fractional Calculus
(MDPI, 2022)
A new situation to note about the obtained boundaries is the symmetry in the upper and lower boundary, where the upper boundary differs by a constant from the lower boundary. New consequences of the inequalities were ...
Report of RILEM TC 281-CCC: outcomes of a round robin on the resistance to accelerated carbonation of Portland, Portland-fly ash and blast-furnace blended cements
(Springer, 2022)
Many (inter)national standards exist to evaluate the resistance of mortar and concrete to carbonation. When a carbonation coefficient is used for performance comparison of mixtures or service life prediction, the applied ...
Coefficient characterization for certain classes of univalent functions
(Bulletin of the Belgian Mathematical Society - Simon Stevin, 2009)
Necessary and sufficient coefficient conditions are established for certain
classes of analytic functions to be univalent in the unit disk. In addition,
characterizations and convolution results are established for these ...