Претраживање
Приказ резултата 1-10 од 14
THE OPTIMAL CONFORMAL PROJECTION FOR PAN-EUROPEAN MAPPING
(Association of Surveyors of Slovenia, 2020)
There is an increasing need for pan-European spatial datasets, mainly to support the common European Union policies. This has inevitably raised demands for adopting pan-European cartographic projections to visualize the ...
Stability Calculation of the Plane Steel Frame Structures Using Tangent Modulus Theory
(Hindawi, 2023)
This paper considers the phenomenon of the instability of steel plane frame structures in the elastic-plastic domain. The numerical analysis uses FEM, where the corresponding stiffness matrices are based upon the trigonometric ...
Intuitionistic Propositional Probability Logic
(Mathematical Logic Quarterly, 2022)
We give sound and complete axiomatization of a probabilistic extension of intuitionistic logic. Reasoning with probability operators, unlike other works on this topic, is also intuitionistic, that is, measure functions ...
Stability Calculation of the Plane Steel Frame Structures Using Tangent Modulus Theory
(Hindawi, 2023)
This paper considers the phenomenon of the instability of steel plane frame structures in the elastic-plastic domain. The numerical analysis uses FEM, where the corresponding stiffness matrices are based upon the trigonometric ...
Absolute Time Series GNSS Point Positioning-Data Cleaning and Noise Characterization
(Strojarski fakultet u Slavonskom Brodu, 2020)
Time series data of GNSS point positioning are considerably used for the purpose of geophysical research. The velocity estimates and their uncertainties derive from time series data of GNSS point positioning affected by ...
Experimental investigation of preload losses in high strength bolts under cyclic loading
(GRAĐEVINAR, 2021)
Slip-resistant shear connections with preloaded bolts have traditionally been used in steel
structures exposed to cyclic. Hence, shear load is transferred through friction surfaces
rather than through contact between the ...
Construction cost estimation of reinforced and prestressed concrete bridges using machine learning
(Građevinar, 2021)
Seven state-of-the-art machine learning techniques for estimation of construction
costs of reinforced-concrete and prestressed concrete bridges are investigated in this
paper, including artificial neural networks (ANN) ...
Determination of Mode I fracture properties of European spruce
(Wood Research, 2023)
In this paper an efficient procedure for obtaining a cohesive law for Mode I timber fracture (crack opening), based on the Double Cantilever Beam (DCB) tests is given. DCB tests were performed on ten European spruce specimens ...
Calculating the differences of VTEC values obtained by altimetric and GNSS observations in coastal areas
(SurveyTaylor & Frencis, 2022)
The difference between the VTEC values obtained from the Global Navigation Satellite System
(GNSS) and satellite altimetry is much more noticeable over the ocean and the sea due to less
coverage of the GNSS observations. ...
Validation and comparison of several global geopotential models with an official quasigeoid solution of Serbia
(Association of Surveyors of Slovenia, 2022)
This study aims to analyze the quality of several local reference
quasigeoid surfaces obtained from several Global Geopotential
Models (GGM) relative to the official quasigeoid solution
of Serbia (SQM2011) and GNSS/dh ...