Претраживање
Приказ резултата 1-10 од 21
Specific behaviour of thin-walled member joints with fasteners
(Croatian Association of Civil Engineers, 2012)
Due to small plate thickness, thin-walled members are characterized by some specific features. The theoretical and experimental study of behaviour of thin-walled member connections with mechanical fasteners, bolts and ...
Work cycle based scheduling
(Croatian Association of Civil Engineers, 2013)
The paper proposes a new approach to short-term scheduling based on spatial and technological cycles, continuous crew flows and daily scheduling, named WCBS (Work Cycle Based Scheduling). Application of WCBS is shown on a ...
Application of particle swarms for project time-cost optimization
(Union of Croatian Civil Engineers and Technicians, 2014)
The time-cost optimization of a construction project, as related to the costs of its activities and the total project realization costs, is considered in this paper. Direct and indirect costs, durations of all activities, ...
Different approaches to two-dimensional numerical modelling of natural watercourses
(Union of Croatian Civil Engineers and Technicians, 2017)
Results obtained by analysis of three different approaches to numerical modelling of open watercourses are presented in the paper. Two examples of flow, uniform flow on the physical model of a curve at the Tisza River and ...
Identification of flutter derivatives by forced vibration tests
(Union of Croatian Civil Engineers and Technicians, 2017)
Results of an experimental study related to flutter phenomenon are presented in the paper. Two cross-sections are considered: a rectangular cross-section and a typical symmetric bridge cross-section. Stationary coefficients ...
Aluminium alloy girders strengthened by steel elements
(Union of Croatian Civil Engineers and Technicians, 2016)
When used as construction materials, the aluminium and its alloys are dominant in the field of facade structures. In these applications, a need has been felt in practice to strengthen facade structures made of aluminium ...
Investment strategy for ensuring quality of finishing works on residential buildings
(Union of Croatian Civil Engineers and Technicians, 2015)
The relationship between the quality of finishing works, costs, market value, and profit, is presented and explained for residential buildings. The results show that the higher quality of finishing works increases profit ...
Stabilization of fine-grained soils with fly ash
(Union of Croatian Civil Engineers and Technicians, 2015)
Results of laboratory research focusing on soil stabilization, using fly ash without activators, are presented in the paper. Two types of fine-grained soils were tested: low to medium plasticity clay and very expansive, ...
Application of geological strength index for characterization of weathering-induced failures
(Union of Croatian Civil Engineers and Technicians, 2018)
This study investigates weathering indded failures of the heterogeneous fissile rock mass consisting of sandstone and shale. Discontinuity data was collected and the geological strength index (GSI) value was determined ...
Specific features of stainless steel compression elements
(Union of Croatian Civil Engineers and Technicians, 2015)
Stainless steel has a number of features that define different behaviour of structural elements made of this material, as related to equivalent carbon steel elements. These properties, especially prominent in case of ...