Pretraživanje
Prikaz rezultata 1-10 od 58
Building with wood in 21st century: Contemporary building wood products
(UNIVERSITY OF MONTENEGRO FACULTY OF CIVIL ENGINEERING, 2020)
Sustainable design, alongside environmental awareness, is increasingly becoming a requirement
for building construction. Since the construction industry represents one of the biggest sectorial
emitters of greenhouse ...
Investigation of the seismic behaviour of structural and non-structural components in industrial facilities by means of shaking table tests
(SEDIF 2020 – 2nd International Conference on Seismic Design of Industrial Facilities, 2020)
Industrial facilities consist of the primary load-carrying structure and various process engineering components (secondary structures), which under seismic loading, may exhibit significant damage that may threaten their ...
Seismic performance of multiple-component systems in special risk industrial facilities
(17th World Conference on Earthquake Engineering, 2020)
Past earthquakes demonstrated the high vulnerability of industrial facilities equipped with complex process technologies leading to serious damage of the process equipment and multiple and simultaneous release of hazardous ...
Experimental analysis of structural damping for bolted and welded splice connection join for IPE-80 steel profile
(University of Banja Luka Faculty of Architecture, Civil Engineering and Geodesy, 2020)
Progress and demands of all types of constructions imposed the need for the development of modern structures that are lightweight, but at the same time have high damping capacity and stiffness. The consequences of these ...
Influence of small water storage reservoirs on reliability of irrigation water supply
(Macedonian Committee on Large Dams, 2021)
The paper analyses the consequences of climate change on the irrigation water demand and the impact of water storage reservoirs on increasing the reliability of irrigation water supply. Analyses were performed for the Vrbas ...
Comparisson between damage development on composite and standardized mortar specimens exposed to soluble salts
(Proceedings of SWBSS 2021 Fifth International Conference on Salt Weathering of Buildings and Stone Sculptures, 2021)
Salt crystallization of lime-based rendering mortars is one of the most common reasons for their deterioration. Still, testing of the resistance to soluble salt action has not yet been standardized for this type of material. ...
Velocity field and discharge measurements at the turbine inlet of Iron Gate 2 hydropower plant
(European Geosciences Union/Copernicus Publications, 2021)
To define the performance characteristics of turbines in Hydropower Plants (HPP) accurate hydraulic, mechanical and electrical quantities are needed. The discharge is the most difficult quantity to measure and assess its ...
Effect of Aging on the Rheological Properties of Blends of Virgin and Rejuvenated RA Binders
(RILEM International Symposium on Bituminous Materials, 2020)
The use of rejuvenators has seen a consistent increase over the years in the asphalt pavement industry. This is due to the need for maximizing the demand for incorporating a higher amount of Reclaimed ...
Development of frequency curves for cross-laminated timber (CLT) floors using dynamic stiffness method
(European Association for Structural Dynamics, 2020)
Cross-laminated timber (CLT) panels have an increasing market share and extensive application in civil engineering practice, as full size walls or floor structures. CLT provides a compelling alternative to the concrete and ...
Combining Capital Grant and Availability Payment to Keep Toll Rates Affordable
(Department of Transportation, Faculty of Civil Engineering, University of Zagreb, Croatia, 2021)
In several countries public budgets cannot provide all the funds needed to build priority transport and other infrastructure projects that are economically justified and environmentally and socially sound. Under certain ...