Претраживање
Приказ резултата 1-10 од 22
Analysis of frame structure vibrations induced by traffic
(Croatian Association of Civil Engineers, 2013)
A simple numerical model for the dynamic analysis of 20 frames in the frequency domain, based on the Spectral Element Method (SEM), is presented in the paper. The influence of soil-structure interaction is taken into ...
Identification of flutter derivatives by forced vibration tests
(Union of Croatian Civil Engineers and Technicians, 2017)
Results of an experimental study related to flutter phenomenon are presented in the paper. Two cross-sections are considered: a rectangular cross-section and a typical symmetric bridge cross-section. Stationary coefficients ...
Investment strategy for ensuring quality of finishing works on residential buildings
(Union of Croatian Civil Engineers and Technicians, 2015)
The relationship between the quality of finishing works, costs, market value, and profit, is presented and explained for residential buildings. The results show that the higher quality of finishing works increases profit ...
Buckling resistance of stainless steel angle column / Otpornost na izvijanje tlačnih elemenata izvedenih kutnicima od nehrđajućeg čelika
(Građevinar, 2019)
A numerical study of compressive capacities of stainless steel angle columns is presented
in the paper in order to assess the design procedures presented in Eurocode 3. The study
focuses on pin-ended hot-rolled equal ...
Strength and ductility of concrete confined circular columns
(Union of Croatian Civil Engineers and Technicians, 2014)
The design procedure of capacity and ductility on the concrete columns with circular cross section depending on the amount of the confining reinforcement is presented in this paper. The stress-strain model in which the ...
Analysis of ground settlement caused by tunnel construction
(Croatian Association of Civil Engineers, 2012)
Prediction of ground settlement is considered as highly significant in the design of tunnels located in urban areas. 2D and 3D modelling of tunnel construction, as needed for settlement analysis, is made according to the ...
Work cycle based scheduling
(Croatian Association of Civil Engineers, 2013)
The paper proposes a new approach to short-term scheduling based on spatial and technological cycles, continuous crew flows and daily scheduling, named WCBS (Work Cycle Based Scheduling). Application of WCBS is shown on a ...
Specific features of stainless steel compression elements
(Union of Croatian Civil Engineers and Technicians, 2015)
Stainless steel has a number of features that define different behaviour of structural elements made of this material, as related to equivalent carbon steel elements. These properties, especially prominent in case of ...
Application of particle swarms for project time-cost optimization
(Union of Croatian Civil Engineers and Technicians, 2014)
The time-cost optimization of a construction project, as related to the costs of its activities and the total project realization costs, is considered in this paper. Direct and indirect costs, durations of all activities, ...
Specific behaviour of thin-walled member joints with fasteners
(Croatian Association of Civil Engineers, 2012)
Due to small plate thickness, thin-walled members are characterized by some specific features. The theoretical and experimental study of behaviour of thin-walled member connections with mechanical fasteners, bolts and ...