Претраживање
Приказ резултата 1-10 од 66
Geometric proportional model of the church of the Ljubostinja monastery
(University of Arts in Belgrade Faculty of Applied Arts Kralja Petra 4, Belgrade,Serbia, 2020)
The use of proportions is one of the oldest theoretical issues in architecture. However, sometimes geometry, with its specific shapes and constraints
between them, can fully describe the logic of architectural design. ...
Interpreting parametric-biomimicry design from cad тo bim software: digital modelling based on a sketch of nandi flame
(Serbian Society for Geometry and Graphics (SUGIG) Faculty of Mechanical Engineering, University of Belgrade, 2021)
This research represents an application of two digital modelling softwares, first digital modelling software, chosen as representative of Computer-Aided Design – CAD modelling tool was Fusion 360. The representative of ...
Capturing dam geometry by Lidar and multibeam technology for visualization of structural deformations - Case study Dam Bečej
(Department of Surveying, Faculty of Civil Engineering, Slovak University of Technology in BratislavaCroatian Geodetic Society, ZagrebFaculty of Geodesy, University of Zagreb, Croatia, 2020)
Bečej Dam is a concrete dam on the Tisa River, which has been monitored since the 1980s through the monitoring of point-mark position vector changes on the dam body in 2D and 1D coordinate system. Conventional geodetic ...
Biomimetic Approach to Parametric Flower Modeling
(Advances in Intelligent Systems and Computing book series (AISC, volume 1296); Conference proceedings ICGG 2020, 2020)
Biodesign means life, living forms, it’s often associated with organic shapes and patterns and it has its wide use in landscape architecture. In the past few decades, there has been a great deal of progress in the study ...
Behaviour of duplex stainless steel bolted connections
(Thin-Walled Structures, 2021)
This study deals with the behaviour of duplex stainless steel bolted connections. The aim of the study is torespond to the question if the current stainless steel design specifications are able to predict the behaviourof ...
The contemporary visualization and modelling technologies and techniques for the design of the green roofs
(Serbian Society for Geometry and Graphics (SUGIG) Faculty of Mechanical Engineering, University of Belgrade, 2020)
The contemporary design solutions are merging the boundaries between real and virtual
world. The Landscape architecture like the other interdisciplinary field stepped in a contemporary
technologies area focused on that, ...
The influence of different curing conditions on hvfac rheological and mechanical properties
(University of Banja Luka, 2020)
This research was conducted in order to evaluate the influence of different curing conditions on rheological and mechanical properties of high volume fly ash concrete (HVFAC) in comparison with the ordinary Portland cement ...
Numerical simulation of Submarine non-rigid landslide by an explicit three-step incompressible smoothed particle hydrodynamics
(Elsevier, 2021)
Many landslides in nature may be classified as deformable landslides. The landslide volume is usually modeled as a rheological material when SPH methods are used for landslide simulation, since these methods allow for the ...
Digital bio-transformations inspired by plants: urban installation as 3d model inspired by sketch of spathodea campanulata p. beauv (nandi flame)
(Faculty of Applied Arts, University of Arts in Belgrade, Serbia, 2021)
The field of biodesign, as an art and scientific discipline, deals with the exploration of the principles of organization and functioning of living organisms and the practical application of the acquired knowledge in ...
Imperfection sensitivity study of hot-rolled and laser-welded stainless steel angle columns
(Ernst&Sohn, 2021)
Stainless steel sections are used for structures in aggressive environments where the greater material cost can often be justified in return for longer maintenance-free periods, for example in the water treatment, ...