Претраживање
Приказ резултата 1-10 од 17
Experimental investigation of basic concrete properties for 3D printing technology
(Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije (DIMK)Udruženje savremene industrije glinenih proizvoda Srbije, 2022)
The aim of this paper is an experimental investigation of fresh concrete properties of the mixture designed for 3D printing. Different mixtures with and without chemical additions (superplasticizer and hydration controller) ...
Long-term behavior of composite concrete girders made continuous
(MASE, 2011)
Time-dependent effects are significant for the design of range of concrete structures. Reliable data for creep and shrinkage properties of concrete and analytical procedures are needed to account for these effects. A number ...
Application of 3D Concrete Printing Technology in Serbia
(Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia (SMEITS) Society for Renewable Electrical Power Sources, 2023)
3D concrete printing technology represents a novel method for construction of concrete structures.
By utilizing computer systems and robotic technology, it enables optimization and automation in
construction industry. ...
Resistance of concrete to carbonation and chloride ingress: testing results and service life prediction
(IRMA, 2018)
Reinforcement corrosion due to carbonation and chloride ingress is one of the main deterioration mechanisms of reinforced concrete structures. There is a special concern about concrete structures with a very long demanded ...
Use of Wave Energy to Obtain Kinetic Energy
(Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia (SMEITS) Society for Renewable Electrical Power Sources, 2022)
Wave energy is largely an unused resource for generating electricity, where it is converted into electricity through kinetic energy. There are a number of advantages to adopting this solution. Two of the most important ...
Quantitative and Qualitative Analysis of Concrete Elements in Wind Park
(Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia (SMEITS) Society for Renewable Electrical Power Sources Kneza Miloša str. 7a/II, 11000 Beograd, 2019)
Establishing a wind park presents a complex enterprise, which involves numerous activities, often impossible to synchronize and drive into the appropriate time-frame. Therefore, in some cases, based on reasonable suspicion, ...
Carbonation resistance of high volume fly ash concrete estimated with accelerated and natural tests
(4th RILEM International Conference on Service Life Design for Infrastructures, 2018)
The reuse of industrial residue streams such as fly ash (FA) can be beneficial both from economic and ecological points of view but the durability properties remain the key properties to ensure sustainable application of ...
Physical and Mechanical Properties of Concrete Cured at Low Temperatures
(Business Technical College, Uzice, 2017)
The paper reports the results of experimental tests of physical and mechanical properties of concrete which hardened in cold weather conditions without curing, without protection against precipitation and also without ...
Effect of aggregate type and fly ash content on properties of self-compacting concrete
(Akademija nauka i umetnosti Republike Srpske, 2019)
The paper presents the results of experimental study of Self-Compacting Concrete in fresh and hardened state. Five mixtures were made, in which the content of the following components was varied: aggregates, fly ash in ...
Application of Genetic Algorithm in design of arch bridge
(Građevinski fakultet Subotica, 2021)
Topic of this article is application of Genetic Algorithm (GA) as a method of
global optimization for determining characteristic dimensions of arch concrete bridge.
Implementation of genetic algorithm for designing ...