Rastući trend reverznog inženjerstva, posebno u oblasti građevine, gde je akcenat na ob-novljivim izvorima energije, neposredno prati aktuelna rešenja mernih insturmenata, kao i softvera za procesuiranje dobijenih podataka, gde je neophodan precizan rezultat snimanja objekta. Terestričko lasersko skeniranje (TLS) i fotogrametrija kao savremene merne metode, daju vrlo precizne podatke o objektu, koji su baza za izradu tehničke dokumentacije, kreiranje 3D virtuelnih prototipova i njihove animacije, 3D štampe, provere geometrije, nosivosti, osunčanosti i drugih vrsta analiza. U ovom radu je dat prikaz rezultata geometrijskih analiza stubova vetrogeneratora i 3D modelovanja sa animaci-jom, koji su dobijeni na osnovu podataka TLS i fotogrametrije, uz poređenje preciznosti, sprovedenog tokom 2018. godine na lokalitetu Alibunar u Srbiji.
Reverse engineering growing trend, particularly in the domain of civil engineering, additionally focused on renewable energy resources, actively follows technological improvements of measuring instruments, as well as processing software solutions, both necessary for an accurate objects’ survey. Terrestrial laser scanning (TLS) and photogrammetric methods are contemporary standard for ob-taining very accurate point cloud data, as a base for technical documentation, creation of 3D virtual prototypes and their animation, 3D printing, geometry inspection, loads, insolation or other analyzes. This paper presents results of geometric analysis of wind turbine tower, its 3D modeling with animation, based on TLS and photogrammetric data, obtained during 2018 at Alibunar in Serbia.
TY - CONF
AU - Kosić, Boris
AU - Stojanović, Dijana
AU - Dragović, Magdalena
AU - Radosavljević, Marko
AU - Stević, Zoran
PY - 2018
UR - https://grafar.grf.bg.ac.rs/handle/123456789/1951
AB - Rastući trend reverznog inženjerstva, posebno u oblasti građevine, gde je akcenat na ob-novljivim izvorima energije, neposredno prati aktuelna rešenja mernih insturmenata, kao i softvera za procesuiranje dobijenih podataka, gde je neophodan precizan rezultat snimanja objekta. Terestričko lasersko skeniranje (TLS) i fotogrametrija kao savremene merne metode, daju vrlo precizne podatke o objektu, koji su baza za izradu tehničke dokumentacije, kreiranje 3D virtuelnih prototipova i njihove animacije, 3D štampe, provere geometrije, nosivosti, osunčanosti i drugih vrsta analiza. U ovom radu je dat prikaz rezultata geometrijskih analiza stubova vetrogeneratora i 3D modelovanja sa animaci-jom, koji su dobijeni na osnovu podataka TLS i fotogrametrije, uz poređenje preciznosti, sprovedenog tokom 2018. godine na lokalitetu Alibunar u Srbiji.
AB - Reverse engineering growing trend, particularly in the domain of civil engineering, additionally focused on renewable energy resources, actively follows technological improvements of measuring instruments, as well as processing software solutions, both necessary for an accurate objects’ survey. Terrestrial laser scanning (TLS) and photogrammetric methods are contemporary standard for ob-taining very accurate point cloud data, as a base for technical documentation, creation of 3D virtual prototypes and their animation, 3D printing, geometry inspection, loads, insolation or other analyzes. This paper presents results of geometric analysis of wind turbine tower, its 3D modeling with animation, based on TLS and photogrammetric data, obtained during 2018 at Alibunar in Serbia.
PB - Savez mašinskih i elektrotehničkih inženjera Srbije (SMEITS) - Društvo za obnovljive izvore energije
C3 - Proceedings of International Conference on Renewable Electrical Power Sources - MKOIEE 6
T1 - Terestričko lasersko skeniranje i 3D modelovanje vetrogeneratora
T1 - Terrestrial laser scanning and 3D modelling of wind-turbine generator
EP - 220
SP - 213
VL - 1
UR - https://hdl.handle.net/21.15107/rcub_grafar_1951
ER -
@conference{
author = "Kosić, Boris and Stojanović, Dijana and Dragović, Magdalena and Radosavljević, Marko and Stević, Zoran",
year = "2018",
abstract = "Rastući trend reverznog inženjerstva, posebno u oblasti građevine, gde je akcenat na ob-novljivim izvorima energije, neposredno prati aktuelna rešenja mernih insturmenata, kao i softvera za procesuiranje dobijenih podataka, gde je neophodan precizan rezultat snimanja objekta. Terestričko lasersko skeniranje (TLS) i fotogrametrija kao savremene merne metode, daju vrlo precizne podatke o objektu, koji su baza za izradu tehničke dokumentacije, kreiranje 3D virtuelnih prototipova i njihove animacije, 3D štampe, provere geometrije, nosivosti, osunčanosti i drugih vrsta analiza. U ovom radu je dat prikaz rezultata geometrijskih analiza stubova vetrogeneratora i 3D modelovanja sa animaci-jom, koji su dobijeni na osnovu podataka TLS i fotogrametrije, uz poređenje preciznosti, sprovedenog tokom 2018. godine na lokalitetu Alibunar u Srbiji., Reverse engineering growing trend, particularly in the domain of civil engineering, additionally focused on renewable energy resources, actively follows technological improvements of measuring instruments, as well as processing software solutions, both necessary for an accurate objects’ survey. Terrestrial laser scanning (TLS) and photogrammetric methods are contemporary standard for ob-taining very accurate point cloud data, as a base for technical documentation, creation of 3D virtual prototypes and their animation, 3D printing, geometry inspection, loads, insolation or other analyzes. This paper presents results of geometric analysis of wind turbine tower, its 3D modeling with animation, based on TLS and photogrammetric data, obtained during 2018 at Alibunar in Serbia.",
publisher = "Savez mašinskih i elektrotehničkih inženjera Srbije (SMEITS) - Društvo za obnovljive izvore energije",
journal = "Proceedings of International Conference on Renewable Electrical Power Sources - MKOIEE 6",
title = "Terestričko lasersko skeniranje i 3D modelovanje vetrogeneratora, Terrestrial laser scanning and 3D modelling of wind-turbine generator",
pages = "220-213",
volume = "1",
url = "https://hdl.handle.net/21.15107/rcub_grafar_1951"
}
Kosić, B., Stojanović, D., Dragović, M., Radosavljević, M.,& Stević, Z.. (2018). Terestričko lasersko skeniranje i 3D modelovanje vetrogeneratora. in Proceedings of International Conference on Renewable Electrical Power Sources - MKOIEE 6
Savez mašinskih i elektrotehničkih inženjera Srbije (SMEITS) - Društvo za obnovljive izvore energije., 1, 213-220.
https://hdl.handle.net/21.15107/rcub_grafar_1951
Kosić B, Stojanović D, Dragović M, Radosavljević M, Stević Z. Terestričko lasersko skeniranje i 3D modelovanje vetrogeneratora. in Proceedings of International Conference on Renewable Electrical Power Sources - MKOIEE 6. 2018;1:213-220.
https://hdl.handle.net/21.15107/rcub_grafar_1951 .
Kosić, Boris, Stojanović, Dijana, Dragović, Magdalena, Radosavljević, Marko, Stević, Zoran, "Terestričko lasersko skeniranje i 3D modelovanje vetrogeneratora" in Proceedings of International Conference on Renewable Electrical Power Sources - MKOIEE 6, 1 (2018):213-220,
https://hdl.handle.net/21.15107/rcub_grafar_1951 .
,