Претраживање
Приказ резултата 11-20 од 53
Estimating residual value of heavy construction equipment using ensemble learning
(http://cedb.asce.org, 2021)
Knowing the right moment for the sale of used heavy construction equipment is important information for every construction company. The proposed methodology uses ensemble machine learning techniques to estimate the price ...
Physical and mechanical properties of hemp fibre reinforced alkali-activated fly ash and fly ash/slag mortars
(Elsevier Ltd., 2020)
Two alkali-activated mortars with different solid prime materials were analysed. The first mortar contained fly ash, had lower density, higher water absorption, lower compactness, lower compressive strength, similar flexural ...
Structural response to axial testing of cold-formed stainless steel angle columns
(Thin-Walled Structures, 2020)
In this paper, the structural stability and compressive capacity of pin-ended cold-formed stainless steel angle columns with different slenderness were experimentally investigated. The experimental programme was performed ...
Interpreting parametric-biomimicry design from cad тo bim software: digital modelling based on a sketch of nandi flame
(Serbian Society for Geometry and Graphics (SUGIG) Faculty of Mechanical Engineering, University of Belgrade, 2021)
This research represents an application of two digital modelling softwares, first digital modelling software, chosen as representative of Computer-Aided Design – CAD modelling tool was Fusion 360. The representative of ...
Biomimetic approach to parametric flower modeling
(19th International Conference on Geometry and Graphics 2021 ISGG, São Paulo, Brazil, 2021)
A sustainable design based on biomimicry can still fulfill the functional needs of humans and be
visually satisfying by representing man's connection to nature. Biomorphic means life, living forms,
it’s often associated ...
Behaviour of duplex stainless steel bolted connections
(Thin-Walled Structures, 2021)
This study deals with the behaviour of duplex stainless steel bolted connections. The aim of the study is torespond to the question if the current stainless steel design specifications are able to predict the behaviourof ...
Geometric proportional model of the church of the Ljubostinja monastery
(University of Arts in Belgrade Faculty of Applied Arts Kralja Petra 4, Belgrade,Serbia, 2020)
The use of proportions is one of the oldest theoretical issues in architecture. However, sometimes geometry, with its specific shapes and constraints
between them, can fully describe the logic of architectural design. ...
Biomimetic Approach to Parametric Flower Modeling
(Advances in Intelligent Systems and Computing book series (AISC, volume 1296); Conference proceedings ICGG 2020, 2020)
Biodesign means life, living forms, it’s often associated with organic shapes and patterns and it has its wide use in landscape architecture. In the past few decades, there has been a great deal of progress in the study ...
Chebyshev polynomials and r-circulant matrices
(Applied Mathematics and Computation, 2022)
This paper connects two attractive topics in applied mathematics, r-circulant matrices and the
Chebyshev polynomials. The r-circulant matrices whose entries are the Chebyshev polynomials
of the first or second kind are ...
Span-to-depth ratio limits for deflection control of reinforced concrete elements
(Structural Concrete, 2022)
Indirect deflection control usually applies the limitation of the span-to-depth
ratio. The procedures that have developed in the past decades have mostly
been derived for predefined values of some of the relevant parameters. ...