Претраживање
Приказ резултата 31-40 од 108
Parametric modeling as geometric tool for designing urban model of biomorphic from inspired by flower of bell flower (Campanula persicifolia L.)
(Serbian Society for Geometry and Graphics (SUGIG) Faculty of Technical Sciences, University of Novi Sad, 2018)
The aim of this research was to apply parametric modeling as appropriate geometric tool in landscape architecture design. Nature model used as inspiration in designing process was flower of the species bell flower (Campanula ...
The 3DNet-Catch hydrologic model: Development and evaluation
(Elsevier B.V., 2019)
Hydrologic models are important for effective water resources management. They vary in complexity from parsimonious, spatially lumped, to physically-based, fully distributed models, which are generally expected to outperform ...
Column Curves for Stainless Steel Lipped–Channel Sections
(Journal of Structural Engineering, 2020)
The strength of thin-walled stainless steel columns has been investigated extensively over the last few years. The present paper presents the results of an extensive computational study of the buckling strength of ...
Biodesign inspired by the leaf and flower of dandelion (leontodon taraxacum l.)
(Published by the AFGS2021 Organizing Committee, 2021)
Bionics is a scientific field that studies the laws of origin and structure of "living"
nature in combination with knowledge of biology and technology. By applying bionics, sustainable solutions and answers to the great ...
Triangular proportional scheme and concept of the two Serbian medieval churches
(Springer Verlag, 2018)
Serbian medieval architectural heritage is notable for its sacred architecture including numerous Christian Orthodox churches built at the territory of former Raška state during the period from the 12th to the 14th centuries. ...
Horizontal coordinates transformation and residuals modelling on the territory of the Republic of Srpska
(Taylor & Francis, 2020)
The paper describes the optimal model for coordinate transformation between ETRS89 and old national reference system in the Republic of Srpska. The Helmert`s parameters were estimated, based on a set of 1 741 common points. ...
Historical rainfall for urban storm drainage design
(Water Science and Technology, 1998)
Traditional design method for urban drainage systems is based on design storms and its major drawback is that frequencies of peak flows in the system are considered equal to frequencies of design storms. An alternative is ...
Adverse-slope stilling basins: machine learning approach to estimation of hydraulic jump features
(SDHI/SDH, 2018)
Stilling basins are the most commonly used energy dissipating structure for large dams, due to their high operating reliability under a wide range of inflow conditions. However, unsatisfactory tailwater conditions, primarily ...
Measurements, calibration of rainfall-runoff models and assessment of the return period of flooding events at urban catchment Kumodraž in Belgrade
(IWA Publishing, 2002)
For the purpose of re-design and improvement of the combined sewer system at the Kumodraz catchment in Belgrade, measurements of rainfall and runoff at the catchment were established in late 1997. Observed data are used ...
Digital bio-transformations inspired by plants: urban installation as 3d model inspired by sketch of spathodea campanulata p. beauv (nandi flame)
(Faculty of Applied Arts, University of Arts in Belgrade, Serbia, 2021)
The field of biodesign, as an art and scientific discipline, deals with the exploration of the principles of organization and functioning of living organisms and the practical application of the acquired knowledge in ...