Претраживање
Приказ резултата 1-10 од 56
Numerical modelling of simultaneous overtopping and seepage flows with application to dike breaching
(Journal of Hydraulic Research, 2019)
A comparative environmental impact analysis of asphalt mixtures containing Crumb Rubber and Reclaimed Asphalt Pavement using Life Cycle Assessment
(Taylor&Francis, 2019)
Recently, the reduction of the environmental burdens related to highway infrastructures has been in the spotlight. Within this context, the use of recycled materials in bituminous mixtures for road pavement construction ...
Recommendation of RILEM TC 264 RAP on the evaluation of asphalt recycling agents for hot mix asphalt
(Springer, 2022)
This recommendation is based on the results of an inter-laboratory study organised by the RILEM technical committee TC 264-RAP "Asphalt Pavement Recycling"—Task Group 3 (TG3) focusing on Asphalt Binder for Recycled Asphalt ...
Epilithic diatoms in environmental bioindication and trout farm’s effects on ecological quality assessment of rivers
(Elsevier, 2021)
The main aim of this study was to investigate the application of benthic diatoms and the efficiency of diatom indices in water ecological assessment of rivers in Serbia, as well as the influence of trout farms on rivers ...
Machine learning based landslide assessment of the Belgrade metropolitan area: Pixel resolution effects and a cross-scaling concept
(Elsevier, 2019)
Improvements of Machine Learning-based landslide prediction models can be made by optimizing scale, customizing training samples to provide sets with the best examples, feature selection, etc. Herein, a novel approach, ...
Design procedures for cold-formed stainless steel equal-leg angle columns
(Thin-Walled Structures, 2020)
Currently, there is still no explicit design approach for cold-formed stainless steel columns with equal-leg angle sections in Europe. A comprehensive numerical investigation, validated by the available experiments collected ...
Innovative decoupling system for the seismic protection of masonry infill walls in reinforced concrete frames
(Elsevier, 2019)
Reinforced concrete frame structures with masonry infills often exhibit serious damage after earthquake events, as the infills are generally installed without additional constructive measures in contact to the reinforced ...
Structural response to axial testing of cold-formed stainless steel angle columns
(Thin-Walled Structures, 2020)
In this paper, the structural stability and compressive capacity of pin-ended cold-formed stainless steel angle columns with different slenderness were experimentally investigated. The experimental programme was performed ...
Three-dimensional stress analysis and design of cross-laminated timber panels using full-layerwise-theory-based finite element method
(Elsevier, 2020)
Cross-laminated timber (CLT) panels have an increasing market share and extensive application in civil engineering, as full size walls or light floor structures. Due to their low environmental impact, excellent thermal ...
Shear resistance of headed shear studs welded on welded plates in composite floors
(Elsevier Ltd., 2019)
The present paper deals with composite steel-concrete floor with headed shear studs welded onto a flat steel plate. In bridges applications, which are the focus of the paper, very thick steel plates are often combined with ...