Претраживање
Приказ резултата 1-10 од 95
Performance of reinforced concrete buildings during the November 26, 2019 Albania earthquake (Mw 6.4) and December 29, 2020 Petrinja earthquake (Mw 6.4)
(3rd European Conference on Earthquake Engineering & Seismology, 2022)
Past earthquakes have affected millions of people whose lives changed within a minute, and caused damage or collapse of thousands of buildings and infrastructure systems. In many cases, earthquakes have long-term consequences. ...
Vibrations of rectangular flexible foundation on halfspace
(EASD Procedia, 2020)
A semi-analytical method deals with vertical vibrations of a massive, flexible rectangular foundation smoothly jointed to an elastic, homogeneous halfspace is presented. The method is based on the solution in frequency ...
Determinationof the salt distribution in the lime-based mortar samples using XRF and SEM-EDX characterization
(Springer, 2023)
Although, the salt crystallization is one of the most common causes of the deterioration of lime-based mortars, testing of their resistance to the soluble salt action has not yet been standardized. The problems following ...
Velocity field and discharge measurements at the turbine inlet of Iron Gate 2 hydropower plant
(European Geosciences Union/Copernicus Publications, 2021)
To define the performance characteristics of turbines in Hydropower Plants (HPP) accurate hydraulic, mechanical and electrical quantities are needed. The discharge is the most difficult quantity to measure and assess its ...
Investigation of the seismic behaviour of structural and non-structural components in industrial facilities by means of shaking table tests
(SEDIF 2020 – 2nd International Conference on Seismic Design of Industrial Facilities, 2020)
Industrial facilities consist of the primary load-carrying structure and various process engineering components (secondary structures), which under seismic loading, may exhibit significant damage that may threaten their ...
Estimation of vertical accuracy of digital terrain model FABDEM on the territory of the republic of Serbia
(SGEM, 51 Alexander Malinov blvd, Sofia, 1712, Bulgaria, 2022)
In 2004, a digital terrain model (DTM) was created in Serbia. It was obtained by vectorizing isohypses on topographic maps with a scale of 1: 25000. The resolution of the digital model of Serbia is 30 m, and the vertical ...
Influence of small water storage reservoirs on reliability of irrigation water supply
(Macedonian Committee on Large Dams, 2021)
The paper analyses the consequences of climate change on the irrigation water demand and the impact of water storage reservoirs on increasing the reliability of irrigation water supply. Analyses were performed for the Vrbas ...
New Eurocode 4 design rules for composite beams with precast concrete slabs
(Ernest & Sohn a Willey Brands, 2023)
As members of Project Team SC4.T5, the authors of this paper present the main outcomes from the work that isintended for implementation within the second generation of Eurocode 4. General design and application ...
Development of frequency curves for cross-laminated timber (CLT) floors using dynamic stiffness method
(European Association for Structural Dynamics, 2020)
Cross-laminated timber (CLT) panels have an increasing market share and extensive application in civil engineering practice, as full size walls or floor structures. CLT provides a compelling alternative to the concrete and ...
Monitoring active landslide at Umka settlement using UAV photogrammetry
(UNIVERSITY OF MONTENEGRO, FACULTY OF CIVIL ENGINEERING -THE 7th INTERNATIONAL CONFERENCE "CIVIL ENGINEERING - SCIENCE AND PRACTICE", 2020)
The basic idea of the paper is to use UAV photogrammetry for monitoring landslide activities at Umka. The paper describes the monitoring of changes during one year. Two landslide epochs were studied at Umka in the spring, ...