Solving the Situation of Airport Bled by Digital Terrain Modeling Using the Software Package Rinoceros
Конференцијски прилог (Објављена верзија)
,
Faculty of Architecture in Belgrade; Serbian Society for Geometry and Graphics (SUGIG)
Метаподаци
Приказ свих података о документуАпстракт
In the paper, we conducted an examination of topographical
conditions of the airport Bled location, using the digital terrain
modeling. A detailed analysis of the ambience around the airport is
done in relation to natural and artificial obstacles (already built
facilities). The ambience is defined by the imaginary surfaces (the
taxiways, takeoff surface, the access surface, the internal horizontal
surface, conical surface and transitional surface of the takeoff-landing
track) through which can not or should not penetrate obstacles. Using the software package Rhinoceros, we modeled out the terrain at the foot of the mountain massif of the Savinjske Alps and the imaginary surfaces of the airport object, whereat possible obstacles were found. This method of 3D modeling gives a better visualization (display conditions on the ground) than previously applied methods of horizontal projection (2D) and methods of cross and transverse profiles
Кључне речи:
airport / terrain / imaginary surface / tarting-touch down pathИзвор:
PROCEEDINGS | BILTEN of 25th National and 2nd International Scientific Conference moNGeometrija 2010, 2010, 555-564Издавач:
- Belgrade: Faculty of Architecture in Belgrade; Serbian Society for Geometry and Graphics (SUGIG)
Финансирање / пројекти:
Напомена:
- http://mongeometrija.com/media/mongeometrija/2010/moNGeometrija%202010%20-%20PAGINACIJA.pdf http://mongeometrija.com/zbornici/2010/165-petrovic-obradovic-solving-the-situation-of-airport-bled-by-digital-terrain---modeling-using-the-