Now showing items 1-10 of 109
The removal of Zn2+, Pb2+, and As(V) ions by lime activated fly ash and valorization of the exhausted adsorbent
(Elsevier Ltd, 2018)
This study focuses on the use of raw fly ash (FA) and modified fly ash - activated by lime (MFA), as effective and low-cost adsorbents for the removal of heavy metals (Zn2+, Pb2+ and As(V)), followed by the revalorization ...
Long-term behaviour of precipitation at three stations in Serbia
(Acta Hydrotechnica, 2016)
The application of a multi-parameter analysis in choosing the location of a new solid waste landfill in Serbia
(Waste Management & Research, 2013)
This article presents a process of evaluation and selection of the most favourable location for a sanitary landfill facility from three alternative locations, by applying a multi-criteria decision-making (MCDM) method. An ...
Numerical modelling of supercritical flow in circular conduit bends using SPH method
(China Ocean Press, 2017)
The capability of the smoothed-particle hydrodynamics (SPH) method to model supercritical flow in circular pipe bends is considered. The standard SPH method, which makes use of dynamic boundary particles (DBP), is supplemented ...
Drivers of phytoplankton blooms in the Vrutci reservoir during 2014 - 2015 and implications for water supply and management
(Water Research and Management, 2016)
Flood protection and water utilization of karst poljes: example of Gatačko Polje, Eastern Herzegovina
Eastern Herzegovina is highly karstified area, with porosity of karstified rock mass between 0.8 and 2%. It is an area with high precipitation (average annual values in wet year are around 2450 mm), but its distribution ...
Analysis of the utility and management of karst underground reservoirs: case study of the Perucac karst spring
(Carbonates and Evaporites, 2011)
The construction of an underground dam and reservoir to provide an artificial water storage and karst control groundwater discharge regime is one of the most complex systems of tapping structure in karst. There are not ...
3D numerical simulation of cross-levee breaching process due to overtopping flow
(CRC Press/Balkema, 2016)
Dike failures due to overtopping flows cause severe damages. For risk management, it is of great importance to understand the mechanism of dike failure and predict flows and sediment transport in the breaching process ...
Numerical modelling of simultaneous overtopping and seepage flows with application to dike breaching
(Journal of Hydraulic Research, 2019)
Review: The approaches for estimation of limit of detection for ICP-MS trace analysis of arsenic
(Elsevier B.V., 2012)
The analytical properties of an analytical method must be evaluated through validation protocols. Beside specificity and/or selectivity, linearity of calibration, repeatability and accuracy, the most important parameters ...