Претраживање
Приказ резултата 31-40 од 110
Governing factors for motor oil removal from water with different sorption materials
(Journal of Hazardous Materials, 2008)
This paper has been focused on the sorbent efficiency for motor oil removal from water. Two types of sorbents were investigated: organic and inorganic. Natural wool fibers (NWFs) and recycled-wool-based nonwoven material ...
Separation of water-in-oil emulsions by freeze/thaw method and microwave radiation
(Elsevier, 2006)
In this paper, the demulsification has been achieved with the use of freeze/thaw (F/T) method and microwave radiation (MWR). The object of investigation were emulsion samples prepared by mixing the metal-working-oil, FESOL ...
Sewer outlets impact on Topciderka river water quality / Uticaj kanalizacionih ispusta na kvalitet vode Topčiderske reke
(Udruženje za tehnologiju vode i sanitarno inžinjerstvo, Beograd, 2007)
In this paper impact of sewer outlets on water quality of Topciderka river has been presented. Water quality model has been developed as a joint of two standard software packages: HecRAS and QUAL2E. HecRAS, as supporting ...
Fuzzy approach in the uncertainty analysis of the water distribution network of Becej
(Taylor and Francis Ltd., 2006)
One of the most important steps in the development of water distribution system simulation models is providing the dependence of results of simulation on the uncertainty of input values. Information about propagation of ...
Separation of oil-in-water emulsions by freeze/thaw method and microwave radiation (vol 49, pg 192, 2006)
(Separation and Purification Technology, 2007)
The publisher regrets the error in the title of this article. The correct title is printed above.
Temperature field in roller compacted concrete dams / Temperaturnu polje u gravitacionim branama od valjanog betona
(Savez građevinskih inženjera Srbije, Beograd, 2009)
This paper presents 2D and 3D numerical models for unsteady phased thermal analysis of RCC dams. The time evolution of a thermal field has been modeled with actual dam shape, RCC technology and adequate description of ...
Estimating double side-channel spillway capacity / Procena propusne moći dvostrukog bočnog preliva
(Udruženje za tehnologiju vode i sanitarno inžinjerstvo, Beograd, 2009)
The capacity of the double side-channel spillway, consisting of the two spillways, with channels joining into a common single branch, is estimated in this paper. For the specific site conditions, such an arrangement may ...
Demulsification based on the thermal treatment (cooling and heating) of W/O emulsions / Demulzifikacija naizmeničnim hlađenjem i zagrevanjem
(Savez hemijskih inženjera, Beograd, 2004)
An important step in waste water treatment is the removal of oil from an O/W emulsion and the separation of oil and water into two phases, a process usually called demulsification. Modern methods of oil removal from waste ...
On the effect of the bed morphology on the river confluence hydrodynamics
(Proceedings of the International Conference on Fluvial Hydraulics - River Flow 2006, 2006)
A river confluence is known for the strong three-dimensional flow effects. The confluence hydrodynamics is significantly influenced by the river bed morphology. Two morphological features are typical for river confluences: ...
Stochastic approach to flood damage assessment / Stohastički pristup u određivanju šteta od poplava
(Jugoslovensko društvo za odvodnjavanje i navodnjavanje, Beograd, 2008)
This article deals with deterministic and stochastic approaches to assess the expected annual flood damages. Each approach is illustrated by a case study pertaining to floods at different sections of the Tamnava river in ...