Prikaz osnovnih podataka o dokumentu

dc.creatorMijatović, Ognjen
dc.creatorMišković, Zoran
dc.creatorSalatić, Ratko
dc.creatorRastislav, Mandić
dc.creatorGolubović-Bugarski, Valentina
dc.date.accessioned2021-01-28T10:28:45Z
dc.date.available2021-01-28T10:28:45Z
dc.date.issued2020
dc.identifier.urihttps://grafar.grf.bg.ac.rs/handle/123456789/2250
dc.description.abstractThe aim of this paper is to discuss numerical analysis and verification of experimentally tested bolted and weld splice connections in the commercial Abaqus software. The first step in verifying a numerical model with an experimental one is to compare the modal frequencies. The problems that arise when modeling multiple bodies in a contact interaction, such as in the case of bolted splice connection joint, arise from the behavior of the contact itself [2] and [1]. In order for the numerical model to be stable and without calculations convergence issue, it is necessary to: define an adequate type and size of finite elements, determine the master and slave surfaces, and properly define the constraints and connections of the separate parts of the bolted welded connection structure. Tests with a modal hammer were performed in order to find the oscillation tones of the cantilever beam under consideration, which would be compared with the numerical model. Based on a comparison of numerical and experimental results, it is discussed whether the experimental beam is adequately designed and constructed and the effects of the support and splice connections on the frequencies are considered.sr
dc.language.isoensr
dc.relationinfo:eu-repo/grantAgreement/MESTD/Technological Development (TD or TR)/36048/RS//sr
dc.rightsrestrictedAccesssr
dc.rights.urihttps://creativecommons.org/licenses/by-nc-nd/4.0/
dc.sourceTHE 7th INTERNATIONAL CONFERENCE "CIVIL ENGINEERING - SCIENCE AND PRACTICE" GNP 2020 – Kolašin, Montenegrosr
dc.subjectDynamic propertiessr
dc.subjectbeam splice connectionssr
dc.subjectnumerical and experimental analysissr
dc.titleA numerical verification of IPE-80 steel cantilever beam with bolted and welded splice connection jointsr
dc.typeconferenceObjectsr
dc.rights.licenseBY-NC-NDsr
dc.citation.epage148
dc.citation.spage141
dc.identifier.rcubhttps://hdl.handle.net/21.15107/rcub_grafar_2250
dc.type.versionpublishedVersionsr


Dokumenti

Thumbnail
Thumbnail

Ovaj dokument se pojavljuje u sledećim kolekcijama

Prikaz osnovnih podataka o dokumentu