Приказ основних података о документу

dc.creatorObradović, Nikola
dc.creatorPujević, Veljko
dc.creatorVukićević, Mirjana
dc.date.accessioned2021-12-06T14:18:27Z
dc.date.available2021-12-06T14:18:27Z
dc.date.issued2019
dc.identifier.isbn978-86-88897-13-6
dc.identifier.urihttps://grafar.grf.bg.ac.rs/handle/123456789/2441
dc.description.abstractStandard SRPS EN 1997-1 je krajem 2018. godine preveden i usvojen, dok je izrada nacionalnih priloga u završnoj fazi. S tim u vezi kao i zbog brojnih nedoumica stručne javnosti u vezi sa primenom EN 1997-1, autori su u ovom radu dali pojašnjenja procesa projektovanja aksijalno pritisnutih šipova prema EN7. Razlike između domaćeg pravilnika i EN7 ilustrovane su kroz numerički primer, čiji je primarni cilj uporedna analiza dužina šipova prema tradicionalnom postupku(globalni faktor sigurnosti) i prema EN7 (parcijalni faktori). Sprovedene analize potvrdile su podobnost preporučene vrednosti modelskog faktora γM date u nacrtu nacionalnog priloga.sr
dc.description.abstractThe standard SRPS EN 1997-1 was translated and adopted at the end of 2018, while the development of national annexes is in the final stage. In this regard, and due to concerns of engineering community about the application of EN 1997-1, the authors of this paper have provided clarification of the design process of axially loaded compression piles according EN7. The differences between the national code of practice and EN7 are illustrated through a design example, which aimed to compare pile lengths obtained applying the traditional procedure (global security factor) and to EN7 (partial factors). The performed analyses confirmed the suitability of the recommended value of the model factor γM provided in the draft national annex.sr
dc.language.isosrsr
dc.rightsopenAccesssr
dc.rights.urihttps://creativecommons.org/licenses/by-nc-nd/4.0/
dc.sourceConference proceedings of eight international conference Geotechnics in civil engineeringsr
dc.subjectEurocode 7sr
dc.subjectpile bearing capacitysr
dc.subjectmodel factorsr
dc.titleA comparative analysis of pile design using eurocode 7 and national code of practicesr
dc.typeconferenceObjectsr
dc.rights.licenseBY-NC-NDsr
dc.citation.epage86
dc.citation.spage79
dc.identifier.fulltexthttp://grafar.grf.bg.ac.rs/bitstream/id/9600/2019_VB_NO_VP_MV.pdf
dc.identifier.rcubhttps://hdl.handle.net/21.15107/rcub_grafar_2441
dc.type.versionpublishedVersionsr


Документи

Thumbnail

Овај документ се појављује у следећим колекцијама

Приказ основних података о документу