Приказ основних података о документу

dc.creatorFilipović, Aljoša
dc.creatorDobrić, Jelena
dc.creatorMarković, Zlatko
dc.creatorBaddoo, Nancy
dc.date.accessioned2021-12-29T14:50:01Z
dc.date.available2021-12-29T14:50:01Z
dc.date.issued2021
dc.identifier.urihttps://grafar.grf.bg.ac.rs/handle/123456789/2610
dc.description.abstractStainless steel sections are used for structures in aggressive environments where the greater material cost can often be justified in return for longer maintenance-free periods, for example in the water treatment, nuclear, petrochemical and food and beverage sectors. This paper presents a comparative imperfection sensitivity study of hot-rolled and laser-welded pin-ended equal angle columns made of austenitic stainless steel grade 1.4301. Although the initial geometric imperfections in these structural elements are similar, there is a difference in the initial stress state due to the different manufacturing processes. The study includes three-dimensional geometric imperfection measurements conducted by a laser scanner, and, in parallel residual stress measurements performed by the sectioning method using water jet cutting. The overall bow, camber, and twist imperfections are determined from the scanned specimens. In addition, the shapes of the residual stress patterns through the thickness of the angle leg are shown. Based on the findings related to imperfection distributions and amplitudes, a FE analysis is performed both on hot-rolled and laser-welded angles to study the influence of the variability of initial imperfections on compression resistance. The separate and combined effects of the measured residual stresses and initial out-of-straightness are considered and the reduction in the buckling resistances of initially straight angle columns is determined. The structural responses of hot-rolled and laser-welded columns are compared and discussed.sr
dc.language.isoensr
dc.publisherErnst&Sohnsr
dc.relationinfo:eu-repo/grantAgreement/MESTD/Technological Development (TD or TR)/36048/RS//sr
dc.rightsrestrictedAccesssr
dc.sourceCE/Paperssr
dc.subjectstainless steelsr
dc.subjectbucklingsr
dc.subjectangle columnsr
dc.subjectgeometric imperfectionsr
dc.subjectresidual stresssr
dc.titleImperfection sensitivity study of hot-rolled and laser-welded stainless steel angle columnssr
dc.typeconferenceObjectsr
dc.rights.licenseARRsr
dc.rights.holderErnst & Sohnsr
dc.identifier.rcubhttps://hdl.handle.net/21.15107/rcub_grafar_2610
dc.type.versionacceptedVersionsr


Документи

Thumbnail

Овај документ се појављује у следећим колекцијама

Приказ основних података о документу