Приказ основних података о документу

Proračun podužnog smicanja u betonskoj ploči spregnutog nosača prema EC4

dc.creatorDeretić-Stojanović, Biljana
dc.creatorKostić, Svetlana M.
dc.creatorMarković, Nenad
dc.date.accessioned2019-04-19T14:15:36Z
dc.date.available2019-04-19T14:15:36Z
dc.date.issued2010
dc.identifier.issn0350-8587
dc.identifier.urihttps://grafar.grf.bg.ac.rs/handle/123456789/317
dc.description.abstractIn this paper, the analysis of longitudinal shear in concrete slab, according to Eurocode 4 (EN 1994-1-1:2004), is shown. The potential surfaces of shear failure in solid and composite slab are analyzed. For each potential surface of shear failure, the corresponding length is defined. The transverse reinforcement should be determined from the condition that, for any potential surface of shear failure, the design longitudinal shear per unit length (shear flow) is not greater than the longitudinal shear resistance of the slab per unit length. The longitudinal shear resistance of concrete slab per unit length should be determined according to EN 1992-1-1. The rules for transverse reinforcement are based on a truss analogy, i.e. the concrete slab is considered as a truss system that has compressed concrete struts and tensioned reinforcement (chords).The failure occurs when either the reinforcement yields or the concrete struts fail in compression. The transverse reinforcement in the concrete slab transfers the shear stresses from studs (shear connectors) and ensures that the premature failure of the slab will not occur.en
dc.description.abstractU radu se prikazuje proračun podužnog smicanja u betonskoj ploči prema Evrokodu 4 (EN 1994-1-1:2004). Analiziraju se potencijalne površine loma usled podužnog smicanja, u punoj i spregnutoj betonskoj ploči. Za svaku potencijalnu površinu loma definiše se odgovarajuća dužina površine smicanja. Proračun nosivosti pri podužnom smicanju se zasniva na uslovu da proračunski podužni napon smicanja, bilo koje potencijalne površine loma usled podužnog smicanja u okviru ploče, ne bude veći od proračunske nosivosti pri podužnom smicanju. Proračunska nosivost pri podužnom smicanju betonske ploče se određuje u skladu sa EN 1992-1-1. Ovaj proračun se zasniva na modelu rešetke, tj. betonska ploča se posmatra kao sistem kosih (dijagonalnih) pritisnutih betonskih štapova kombinovan sa zategama koje predstavlja poprečna zategnuta armatura. Gubitak nosivosti (lom) betonske ploče nastaje ako dođe do tečenja (loma) u armaturi ili ako dođe do drobljenja betona u pritisnutim štapovima. U betonskoj ploči se obezbeđuje adekvatna površina poprečne armature koja će da prenese smičuće napone iz moždanika i obezbedi da ne dođe do prevremenog loma u betonu.sr
dc.publisherUniverzitet u Nišu - Građevinsko-arhitektonski fakultet, Niš
dc.relationinfo:eu-repo/grantAgreement/MESTD/MPN2006-2010/16031/RS//
dc.rightsopenAccess
dc.sourceZbornik radova Građevinsko-arhitektonskog fakulteta, Niš
dc.subjectcomposite structuresen
dc.subjectshearen
dc.subjectconcrete slaben
dc.subjectspregnute konstrukcijesr
dc.subjectsmicanjesr
dc.subjectbetonska pločasr
dc.titleLongitudinal shear of concrete slab in composite beam analysis according to EC4en
dc.titleProračun podužnog smicanja u betonskoj ploči spregnutog nosača prema EC4sr
dc.typearticle
dc.rights.licenseARR
dc.citation.epage64
dc.citation.issue25
dc.citation.other(25): 57-64
dc.citation.rankM52
dc.citation.spage57
dc.identifier.fulltexthttps://grafar.grf.bg.ac.rs//bitstream/id/3770/315.pdf
dc.identifier.rcubhttps://hdl.handle.net/21.15107/rcub_grafar_317
dc.type.versionpublishedVersion


Документи

Thumbnail

Овај документ се појављује у следећим колекцијама

Приказ основних података о документу