Stability analysis of FGM plates by using layer wise displacement model
Конференцијски прилог (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
In this paper, the stability analysis of simply supported functionally graded material (FGM) plate under mechanical in–plane compressive loads is analyzed. The displacement model based on Generalized Laminate Plate Theory (GLPT) assumes piece–wise linear variation of in–plane displacements, constant transverse displacement, non–linear strain–displacement relations (in von Karman sense) and linear material properties. The properties of FGMs are assumed to be constant in xy–plane and vary through thickness by a power law function in terms of volume fraction of the constituents. The mathematical model includes the quadratic variation of transverse shear stresses within each layer of the plate. The principle of virtual displacements (PVD) is used to derive Euler–Lagrange differential equations of linearized buckling problem. Closed form solution is derived following the Navier’s technique and solving the eigenvalue problem. The original MATLAB computer program is coded for the numerical so...lution. The results reveal that the effects of side–to–thickness ratio, power–low index and modulus ratio have significant effect on critical buckling loads of FGM plates.
Кључне речи:
Elastic stability / FGM plate / LW Theory / Navier solution / MATLAB programИзвор:
9th International Congress of the Serbian Society of Mechanics, July 5–7, 2023, Vrnjačka Banja, Serbia, 2023, 1-10Издавач:
- Serbian Society for Computational Mechanics
Финансирање / пројекти:
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200092 (Универзитет у Београду, Грађевински факултет) (RS-MESTD-inst-2020-200092)
Колекције
Институција/група
GraFarTY - CONF AU - Ćetković, Marina PY - 2023 UR - https://grafar.grf.bg.ac.rs/handle/123456789/3325 AB - In this paper, the stability analysis of simply supported functionally graded material (FGM) plate under mechanical in–plane compressive loads is analyzed. The displacement model based on Generalized Laminate Plate Theory (GLPT) assumes piece–wise linear variation of in–plane displacements, constant transverse displacement, non–linear strain–displacement relations (in von Karman sense) and linear material properties. The properties of FGMs are assumed to be constant in xy–plane and vary through thickness by a power law function in terms of volume fraction of the constituents. The mathematical model includes the quadratic variation of transverse shear stresses within each layer of the plate. The principle of virtual displacements (PVD) is used to derive Euler–Lagrange differential equations of linearized buckling problem. Closed form solution is derived following the Navier’s technique and solving the eigenvalue problem. The original MATLAB computer program is coded for the numerical solution. The results reveal that the effects of side–to–thickness ratio, power–low index and modulus ratio have significant effect on critical buckling loads of FGM plates. PB - Serbian Society for Computational Mechanics C3 - 9th International Congress of the Serbian Society of Mechanics, July 5–7, 2023, Vrnjačka Banja, Serbia T1 - Stability analysis of FGM plates by using layer wise displacement model EP - 10 SP - 1 UR - https://hdl.handle.net/21.15107/rcub_grafar_3325 ER -
@conference{ author = "Ćetković, Marina", year = "2023", abstract = "In this paper, the stability analysis of simply supported functionally graded material (FGM) plate under mechanical in–plane compressive loads is analyzed. The displacement model based on Generalized Laminate Plate Theory (GLPT) assumes piece–wise linear variation of in–plane displacements, constant transverse displacement, non–linear strain–displacement relations (in von Karman sense) and linear material properties. The properties of FGMs are assumed to be constant in xy–plane and vary through thickness by a power law function in terms of volume fraction of the constituents. The mathematical model includes the quadratic variation of transverse shear stresses within each layer of the plate. The principle of virtual displacements (PVD) is used to derive Euler–Lagrange differential equations of linearized buckling problem. Closed form solution is derived following the Navier’s technique and solving the eigenvalue problem. The original MATLAB computer program is coded for the numerical solution. The results reveal that the effects of side–to–thickness ratio, power–low index and modulus ratio have significant effect on critical buckling loads of FGM plates.", publisher = "Serbian Society for Computational Mechanics", journal = "9th International Congress of the Serbian Society of Mechanics, July 5–7, 2023, Vrnjačka Banja, Serbia", title = "Stability analysis of FGM plates by using layer wise displacement model", pages = "10-1", url = "https://hdl.handle.net/21.15107/rcub_grafar_3325" }
Ćetković, M.. (2023). Stability analysis of FGM plates by using layer wise displacement model. in 9th International Congress of the Serbian Society of Mechanics, July 5–7, 2023, Vrnjačka Banja, Serbia Serbian Society for Computational Mechanics., 1-10. https://hdl.handle.net/21.15107/rcub_grafar_3325
Ćetković M. Stability analysis of FGM plates by using layer wise displacement model. in 9th International Congress of the Serbian Society of Mechanics, July 5–7, 2023, Vrnjačka Banja, Serbia. 2023;:1-10. https://hdl.handle.net/21.15107/rcub_grafar_3325 .
Ćetković, Marina, "Stability analysis of FGM plates by using layer wise displacement model" in 9th International Congress of the Serbian Society of Mechanics, July 5–7, 2023, Vrnjačka Banja, Serbia (2023):1-10, https://hdl.handle.net/21.15107/rcub_grafar_3325 .