Show simple item record

dc.creatorĆetković, Marina
dc.creatorVuksanović, Đorđe
dc.date.accessioned2019-04-19T14:16:15Z
dc.date.available2019-04-19T14:16:15Z
dc.date.issued2011
dc.identifier.issn1225-4568
dc.identifier.urihttp://grafar.grf.bg.ac.rs/handle/123456789/347
dc.description.abstractIn this paper the geometrically nonlinear continuum plate finite element model, hitherto not reported in the literature, is developed using the total Lagrange formulation. With the layerwise displacement field of Reddy, nonlinear Green-Lagrange small strain large displacements relations (in the von Karman sense) and linear elastic orthotropic material properties for each lamina, the 3D elasticity equations are reduced to 2D problem and the nonlinear equilibrium integral form is obtained. By performing the linearization on nonlinear integral form and then the discretization on linearized integral form, tangent stiffness matrix is obtained with less manipulation and in more consistent form, compared to the one obtained using laminated element approach. Symmetric tangent stiffness matrixes, together with internal force vector are then utilized in Newton Raphson's method for the numerical solution of nonlinear incremental finite element equilibrium equations. Despite of its complex layer dependent numerical nature, the present model has no shear locking problems, compared to ESL (Equivalent Single Layer) models, or aspect ratio problems, as the 3D finite element may have when analyzing thin plate behavior. The originally coded MATLAB computer program for the finite element solution is used to verify the accuracy of the numerical model, by calculating nonlinear response of plates with different mechanical properties, which are isotropic, orthotropic and anisotropic (cross ply and angle ply), different plate thickness, different boundary conditions and different load direction (unloading/loading). The obtained results are compared with available results from the literature and the linear solutions from the author's previous papers.en
dc.rightsrestrictedAccess
dc.sourceStructural Engineering and Mechanics
dc.subjectgeometrically nonlinear analysisen
dc.subjectcomposite platesen
dc.subjectcontinuum finite elementen
dc.titleLarge deflection analysis of laminated composite plates using layerwise displacement modelen
dc.typearticle
dc.rights.licenseARR
dc.citation.epage277
dc.citation.issue2
dc.citation.other40(2): 257-277
dc.citation.rankM22
dc.citation.spage257
dc.citation.volume40
dc.identifier.rcubconv_1560
dc.identifier.scopus2-s2.0-80155206394
dc.identifier.wos000295910300007
dc.type.versionpublishedVersion


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record