Show simple item record

dc.creatorBožić, Branko
dc.creatorFan, H.
dc.creatorMilosavljević, Zoran
dc.date.accessioned2019-04-19T14:20:19Z
dc.date.available2019-04-19T14:20:19Z
dc.date.issued2013
dc.identifier.issn0039-6265
dc.identifier.urihttp://grafar.grf.bg.ac.rs/handle/123456789/529
dc.description.abstractThis paper deals with the estimation of the quality of the baseline for the calibration of distance measurement devices which was established by Serbian Military Geographic Institute for military use. The basic characteristics of the baseline are explained, and a plan for the checking of the baseline quality is proposed. The measurements realised so far can be grouped into two phases. The measurements have been processed, and the estimates of the distances of this length standard have been obtained. The standard deviations of the least squares estimates of the lengths were better than 0.3 mm in each epoch. This precision offers the possibility to check all measurement devices with a minimum uncertainty of the calibrations, of +/-(1 mm + 1 ppm). The stability of the pillars is also analysed. The conventional deformation analysis method was applied to three datasets and the results obtained by evaluating them are shown.en
dc.rightsrestrictedAccess
dc.sourceSurvey Review
dc.subjectMilitary Geographic Instituteen
dc.subjectEDM length standarden
dc.subjectEDM calibration baselineen
dc.subjectElectronic distance measurement (EDM)en
dc.titleEstablishment of the MGI EDM calibration baselineen
dc.typearticle
dc.rights.licenseARR
dc.citation.epage268
dc.citation.issue331
dc.citation.other45(331): 263-268
dc.citation.rankM23
dc.citation.spage263
dc.citation.volume45
dc.identifier.doi10.1179/1752270611Y.0000000030
dc.identifier.rcubconv_1631
dc.identifier.scopus2-s2.0-84879819355
dc.identifier.wos000321694400004
dc.type.versionpublishedVersion


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record