Prikaz osnovnih podataka o dokumentu

Korelativni odnosi za definisanje deformabilnosti stene

dc.creatorBabić, Predrag B.
dc.creatorRadovanović, Slobodan
dc.creatorMirković, Uroš B.
dc.date.accessioned2019-04-19T14:29:21Z
dc.date.available2019-04-19T14:29:21Z
dc.date.issued2018
dc.identifier.issn0040-2176
dc.identifier.urihttps://grafar.grf.bg.ac.rs/handle/123456789/928
dc.description.abstractIn the framework of geotechnical investigations of the rock mass at the partition site MHE Bočac 2 (BiH), Jelašnica dams on the same river in southern Serbia and nine partition sites of hydroelectric power plants on the river Ibar, detailed geotechnical investigations of the rock mass were carried out. They included exploration drilling with the definition of quasihomogenic zones within the drilled core, determination of RQD for each separated quasi-chemical zone, dilatometric tests in each well, seismic ventilation between exploratory wells or seismic carotid, core testing by the Point Load method and laboratory tests of the single-axial strength of the samples. By connecting the results of the one-axial strength, the velocity of the elastic waves and the quality of the rockl mass (RMR), i.e. these indirect data for defining the deformability of the rock masses with the obtained results of in situation deformability testing, with the results of dilatometric tests, the analysis of correlation bonds is carried out which is applied in engineering geological or geotechnical practice. As is known, in engineering practice, the following correlations are used to define the deformation module: D = f(RMR); D= f(RMR,σci); D= f(Vp) i D = f(Vp, σci). After the analysis, a correlation was applied which included all three indirect data and it gave the closest data for defining the deformability of the rock mass.en
dc.description.abstractU okviru geotehničkih istraživanja stenske mase na pregradnom mestu MHE 'Bočac 2‟ (BiH), brane 'Jelašnica' na istoimenoj reci u južnoj Srbiji i na devet pregradnih mesta hidroelektrana na Ibru (Srbija) izvršena su detaljna geotehnička ispitivanja stenske mase. Ona su obuhvatila: istražno bušenje sa definisanjem kvazihomogenih zona u okviru izbušenog jezgra, određivanje RQD-a za svaku izdvojenu kvazihomogenu zonu, dilatometarska ispitivanja u svakoj bušotini, seizmičko prozračivanje između istražnih bušotina ili seizmički karotaž, ispitivanje jezgra metodom PointLoad i laboratorijska ispi-tivanja jednoaksijalne čvrstoće uzoraka. Na navedenim istražnim lokacijama teren grade različite ste-nske mase. Teren pregradnog mesta MHE 'Bočac 2' je izgrađen od krednih krečnjaka, teren brane 'Jelašnica' od paleozojskih gnajseva, a teren hidroelektrana na Ibru od mezozojskih peridotita i serpentinita. Povezivanjem rezultata jednoaksijalne čvrstoće, brzine elastičnih talasa i kvaliteta stenske mase (RMR), odnosno ovih posrednih podataka za definisanje deformabilnosti stenskih masa sa do-bijenim rezultatima ispitivanja deformabilsnosti in situ, tj. Sa rezultatima dilatometarskih ispitivanja, urađena je analiza korelacionih veza koja se primenjuje u inženjeresko-geološkoj odnosno geotehničkoj praksi. Kao što je poznato, u inženjerskoj praksi primenjuju se sledeće korelacije za definisanje modula deformacije: D=f(RMR); D=f(RMR,𝜎𝑐𝑖); D=f(Vp) i D=f(Vp, 𝜎𝑐𝑖). Nakon analize, primenjena je korelacija, koja je obuhvatila sva tri posredna podatka i ona je dala najbliže podatke za definisanje deformabilnosti stenske mase. Sva navedena ispitivanja deformabilnosti metodom dilatometra, geofizička ispitivanja i inženjersko-geološko kartiranje jezgra i okolne stenske mase izvršena su od strane Instituta za vodoprivredu 'Jaroslav Černi' iz Beograda.sr
dc.publisherSavez inženjera i tehničara Srbije, Beograd
dc.rightsopenAccess
dc.rights.urihttps://creativecommons.org/licenses/by/4.0/
dc.sourceTehnika
dc.subjectrock massen
dc.subjectdeformabilityen
dc.subjectone-axial strengthen
dc.subjectseismic wave velocityen
dc.subjectcore quality indexen
dc.subjectdeformation moduleen
dc.subjectstenska masasr
dc.subjectdeformabilnostsr
dc.subjectjednoaksijalna čvrstoćasr
dc.subjectbrzina seizmičkih talasasr
dc.subjectindeks kvaliteta jezgrasr
dc.subjectmodul deformacijesr
dc.titleCorrelative relations for defining the rock deformabilityen
dc.titleKorelativni odnosi za definisanje deformabilnosti stenesr
dc.typearticle
dc.rights.licenseBY
dc.citation.epage634
dc.citation.issue5
dc.citation.other73(5): 629-634
dc.citation.rankM51
dc.citation.spage629
dc.citation.volume73
dc.identifier.doi10.5937/tehnika1805629B
dc.identifier.fulltexthttps://grafar.grf.bg.ac.rs//bitstream/id/4287/926.pdf
dc.type.versionpublishedVersion


Dokumenti

Thumbnail

Ovaj dokument se pojavljuje u sledećim kolekcijama

Prikaz osnovnih podataka o dokumentu