Pretraživanje
Prikaz rezultata 21-30 od 68
Design procedures for cold-formed stainless steel equal-leg angle columns
(Thin-Walled Structures, 2020)
Currently, there is still no explicit design approach for cold-formed stainless steel columns with equal-leg angle sections in Europe. A comprehensive numerical investigation, validated by the available experiments collected ...
Bed-mounted Electro Magnetic meters: Implications for robust velocity measurement in Urban Drainage systems
(Elsevier B.V., 2018)
Flow monitoring in Urban Drainage Systems (UDS) is required for a successful system control and operational assessment. Commonly used methods can lead to erroneous results in partially filled pipes and hostile environmental ...
Vehicle swept path analysis based on GPS data
(Canadian Science Publishing, 2018)
Vehicle swept path analysis presents an essential step while working on at-grade intersection and roundabout designs. Following the intensive development of computer-aided design (CAD) software in the past two decades, ...
The 3DNet-Catch hydrologic model: Development and evaluation
(Elsevier B.V., 2019)
Hydrologic models are important for effective water resources management. They vary in complexity from parsimonious, spatially lumped, to physically-based, fully distributed models, which are generally expected to outperform ...
Column Curves for Stainless Steel Lipped–Channel Sections
(Journal of Structural Engineering, 2020)
The strength of thin-walled stainless steel columns has been investigated extensively over the last few years. The present paper presents the results of an extensive computational study of the buckling strength of ...
Triangular proportional scheme and concept of the two Serbian medieval churches
(Springer Verlag, 2018)
Serbian medieval architectural heritage is notable for its sacred architecture including numerous Christian Orthodox churches built at the territory of former Raška state during the period from the 12th to the 14th centuries. ...
Horizontal coordinates transformation and residuals modelling on the territory of the Republic of Srpska
(Taylor & Francis, 2020)
The paper describes the optimal model for coordinate transformation between ETRS89 and old national reference system in the Republic of Srpska. The Helmert`s parameters were estimated, based on a set of 1 741 common points. ...
Quantitative assessment of the parameters linked to the blending between reclaimed asphalt binder and recycling agent: A literature review
(Elsevier, 2020)
The lack of understanding the mechanisms governing the interaction between reclaimed asphalt binder (RAb)1 and recycling agents is one of the technical issues that still need to be resolved when high amount of reclaimed ...
Historical rainfall for urban storm drainage design
(Water Science and Technology, 1998)
Traditional design method for urban drainage systems is based on design storms and its major drawback is that frequencies of peak flows in the system are considered equal to frequencies of design storms. An alternative is ...
Measurements, calibration of rainfall-runoff models and assessment of the return period of flooding events at urban catchment Kumodraž in Belgrade
(IWA Publishing, 2002)
For the purpose of re-design and improvement of the combined sewer system at the Kumodraz catchment in Belgrade, measurements of rainfall and runoff at the catchment were established in late 1997. Observed data are used ...