Претраживање
Приказ резултата 21-30 од 42
Quantitative and Qualitative Analysis of Concrete Elements in Wind Park
(Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia (SMEITS) Society for Renewable Electrical Power Sources Kneza Miloša str. 7a/II, 11000 Beograd, 2019)
Establishing a wind park presents a complex enterprise, which involves numerous activities, often impossible to synchronize and drive into the appropriate time-frame. Therefore, in some cases, based on reasonable suspicion, ...
Copper Slag of Pyroxene Composition as a Partial Replacement of Natural Aggregate for Concrete Production
(MDPI, 2021)
Copper slag, a by-product of the pyrometallurgical process used for obtaining copper from
copper ore in Bor, Serbia, contains mainly silicon, iron, calcium, and aluminium oxides. Due to
such properties, it is disposed ...
Resistance of concrete to carbonation and chloride ingress: testing results and service life prediction
(IRMA, 2018)
Reinforcement corrosion due to carbonation and chloride ingress is one of the main deterioration mechanisms of reinforced concrete structures. There is a special concern about concrete structures with a very long demanded ...
Modeling of properties of fiber reinforced cement composites / Modeliranje svojstava mikroarmiranih cementnih kompozita
(Univerzitet u Nišu, Niš, 2008)
This paper presents the results of authors' laboratory testing of the influence of steel fibers as fiber reinforcement on the change of properties of cement composite mortar and concrete type materials. Mixtures adopted - ...
Behaviour of Reinforced Concrete Beams Made with Recycled and Waste Materials Under Long-Term Loading
(Универзитет у Београду, Грађевински факултет, 2018)
Concrete is the second most-used material in the world after water and its productionplaces a large strain on natural resources and the environment. This has prompted thesearch for sustainable alternatives to traditional ...
Structural application of 3D concrete printing
(Association of Structural Engineers of Serbia, 2022)
3D concrete printing technology enabled a new progress in industrialization, optimization and automatization of processes in contemporary construction works. This paper shows the commonly used methods of concrete 3D printing. ...
Utilization of solidified industrial hazardous waste in construction: A case study
(ACHE Publishing, 2023)
Utilization possibilities of solidified fractions of industrial hazardous waste obtained by mixing
with inert materials in construction were investigated. Waste mineral oils, water-hydrocarbon
emulsions mixture, and waste ...
The possibility of using copper slag aggregate in concrete
(Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije i Udruženje savremene industrije glinenih proizvoda Srbije, 2022)
Copper slag, produced as a by-product of the pyrometallurgical process of obtaining copper from copper ore in Bor, is disposed as waste in landfills. Despite the favorable physical and mechanical properties of concrete ...
Experimental investigation of recycled aggregate concrete / Eksperimentalno ispitivanje betona od recikliranog agregata
(Savez građevinskih inženjera Srbije, Beograd, 2011)
As a result of increasing global environmental awareness and sense of responsibility for future generations utilization of demolition waste as a source of aggregate for structural concrete have been proposed. Financial ...
Use of Wave Energy to Obtain Kinetic Energy
(Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia (SMEITS) Society for Renewable Electrical Power Sources, 2022)
Wave energy is largely an unused resource for generating electricity, where it is converted into electricity through kinetic energy. There are a number of advantages to adopting this solution. Two of the most important ...