Претраживање
Приказ резултата 31-40 од 40
Modeling of properties of fiber reinforced cement composites / Modeliranje svojstava mikroarmiranih cementnih kompozita
(Univerzitet u Nišu, Niš, 2008)
This paper presents the results of authors' laboratory testing of the influence of steel fibers as fiber reinforcement on the change of properties of cement composite mortar and concrete type materials. Mixtures adopted - ...
Structural concrete with partial or total cement replacemnet with fly ash / Konstrukcijski betoni sa delimičnom ili potpunom zamenom cementa elektrofilterskim pepelom
(Savez građevinskih inženjera Srbije, Beograd, 2015)
Building industry is facing with great challenges in directing its activities towards sustainable development. Environmental protection, the use of waste and recycled materials and reduction of the use of non-renewable ...
Long-term behavior of composite concrete girders made continuous
(MASE, 2011)
Time-dependent effects are significant for the design of range of concrete structures. Reliable data for creep and shrinkage properties of concrete and analytical procedures are needed to account for these effects. A number ...
Experimental investigation of basic concrete properties for 3D printing technology
(Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije (DIMK)Udruženje savremene industrije glinenih proizvoda Srbije, 2022)
The aim of this paper is an experimental investigation of fresh concrete properties of the mixture designed for 3D printing. Different mixtures with and without chemical additions (superplasticizer and hydration controller) ...
Uticaj zamene cementa krečnjačkim filerom na svojstva betona
(Univerzitet u Beogradu Građevinski fakultetDruštvo građevinskih konstruktera Srbije, 2021)
U radu su prikazana eksperimentalna ispitivanja jedne vrste zelenih betona kod kojih je Portland cement zamenjen sa dve vrste krečnjačkog filera istog porekla i mineraloškog sastava, a različite finoće mliva. Projektovano ...
Utilization of solidified industrial hazardous waste in construction: A case study
(ACHE Publishing, 2023)
Utilization possibilities of solidified fractions of industrial hazardous waste obtained by mixing
with inert materials in construction were investigated. Waste mineral oils, water-hydrocarbon
emulsions mixture, and waste ...
The possibility of using copper slag aggregate in concrete
(Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije i Udruženje savremene industrije glinenih proizvoda Srbije, 2022)
Copper slag, produced as a by-product of the pyrometallurgical process of obtaining copper from copper ore in Bor, is disposed as waste in landfills. Despite the favorable physical and mechanical properties of concrete ...
Experimental investigation of recycled aggregate concrete / Eksperimentalno ispitivanje betona od recikliranog agregata
(Savez građevinskih inženjera Srbije, Beograd, 2011)
As a result of increasing global environmental awareness and sense of responsibility for future generations utilization of demolition waste as a source of aggregate for structural concrete have been proposed. Financial ...
Effect of Mixing Approach on the Properties of Concrete with Different Aggregate Types
(Academy of Sciences and Arts of the Republic of Srpska, Bana Lazarevića 1, 78000 Banja Luka, Republic of Srpska, B&H, 2022)
The subject of the experimental tests presented in the paper is the influence of the mixing method on the physical and mechanical properties of fine-grained concrete with the nominally largest aggregate grain of 8 mm. ...
Application of 3D Concrete Printing Technology in Serbia
(Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia (SMEITS) Society for Renewable Electrical Power Sources, 2023)
3D concrete printing technology represents a novel method for construction of concrete structures.
By utilizing computer systems and robotic technology, it enables optimization and automation in
construction industry. ...