Претраживање
Приказ резултата 71-79 од 79
Numerical modelling of glulam beams externally reinforced with CFRP plates
(Vienna University of Technology, 2016)
Timber beams can effectively be reinforced using externally bonded fibre reinforced polymer (FRP) composites. This paper describes a nonlinear 3-dimensional finite element model which was developed in order to accurately ...
Physical and mechanical properties of Ultra-high- performance concrete with limestone
(Macedonian Association of Structural Engineers, 2022)
The production of ultra-high performance concrete is one of the new ideas in modern construction, developed in the past few decades. A compressive strength higher than 150 MPa has been achieved using a relatively large ...
Possibilities for Application of Modified Solidified Water Treatment Sludge as Supplementary Cementitious Material
(RILEMSpringer, 2023)
The increased number of water treatment plants induces intensified production of water treatment sludge (WTS) that needs to be stabilized and reused. One of the possible stabilization processes is solidification, which ...
Stability criteria for stainless steel equal-leg angle columns
(Proceedings in Civil Engineering, THE 8th INTERNATIONAL CONFERENCE "CIVIL ENGINEERING – SCIENCE AND PRACTICE" GNP 2022 – Kolašin, Montenegro, 8-12 March 2022, 2022)
Nowadays, the explicit codified criteria for design of centrically compressed stainless steel columns with equal-leg angle sections are absent in Europe. A comprehensive scientific investigation has therefore been undertaken ...
Calibration of the high strenght bolts for measuring of the pretension force
(International Conference on ADVANCES IN STEEL STRUCTURES, Lisbon, Portugal, July 22-24, 2015., 2015)
When analysing slip resistance connections, which are commonly used in-situ assemblied joints of structures dominantly loaded by cyclic loading, for example in bridges, telecommunication towers, towers for wind turbines, ...
Experimental responses of compressed i-section short columns with web openings
(International scientific conference planning, design, construction and building renewal, iNDiS 2023, 16 – 17 November, Fruške Terme, Novi Sad, 2023)
This paper reports the experimental study on compressed I-section short columns with
web openings aimed at providing insight on the specific mechanical behaviour underlying
the local buckling of the web panel around the ...
Theoretical analysis of the possibilities for aluminium alloy beam to be strengthened using elements of steel
(Trans Tech Publications Ltd, 2016)
This paper deal, on example of aluminium alloy beam strengthened by using elements of steel, with theoretical analysis of the possibilities for composite action of beam formed from two materials with considerably different ...
Development and assessment of a modified ζ-method for deflection control of two-way slabs
(fib Symposium. "Concrete Structure: New Trends for Eco-Efficiency and Performance: 18th fib Symposium proceedings", 14-06-2021)
Deflection control of two-way slabs is a very complex task considering their possible geometries, structural systems, reinforcement layouts and loading histories, as well as the large number of influencing parameters and ...
Numerical characterization of innovative demountable beam-column connections using long bolts
(Proceedings in Civil Engineering, XIV CONGRESSO DE CONSTRUÇÃO METÁLICA E MISTA, Convento São Francisco, Coimbra – Portugal, 23-24 November, 2023, 2023)
Circular design strategies such as adaptivity, detachability, and reusability represent
new challenges and increased demands on the future-proof buildings sector. To contribute to
the circularity and sustainability of ...