Претраживање
Приказ резултата 21-30 од 38
The rainfall-induced landsliding in Western Serbia: A temporal prediction approach using Decision Tree technique
(Elsevier B.V., 2018)
This paper focuses on modeling rainfall-induced massive landsliding in the Western Serbia in the 2001-2014 period. The motivation for conducting the study was the rainfall-induced flooding and landsliding that took place ...
Relative Landslide Risk Assessment for the City of Valjevo
(Advancing Culture of Living With Landslides, Vol 5: Landslides in Different Environments, 2017)
This paper represents a relative landslide risk assessment of the City of Valjevo in Western Serbia. After the extreme rainfall during the May 2014, many new landslides were triggered, and Valjevo was one of the most ...
Stabilization of Low Bearing Soil Using Fly Ash and Chemical Additive Polybond
(Springer Verlag, 2018)
The results of laboratory research of high plasticity clay stabilization using liquid chemical additive Polybond and the fly ash from Serbian thermal electric power plant Kostolac are presented in this paper. In order to ...
Rockfall Monitoring Based on Surface Models
(Kluwer Academic Publishers, 2015)
This research addresses surface analysis based on the Terrestrial Laser Scanning data exampled on rockslope site along M-22 highroad near Ljig in Serbia. The slope is about 100 m wide and over 20 m high. The scanning was ...
Multihazard Exposure Assessment on the Valjevo City Road Network
(Elsevier, 2019)
Coupling field and satellite data for an event-based landslide inventory
(Taylor and Francis Inc., 2016)
Following the extreme precipitation and flooding, western and central parts of Serbia suffered massive landsliding at unprecedented rates in mid May 2014. Due to a lack of national landslide inventory and institutional ...
Bounding surface model for overconsolidated clays with new state parameter formulation of hardening rule
(Elsevier Ltd, 2017)
The paper presents a critical state bounding surface constitutive model for describing the behaviour of overconsolidated clays for a wide range of overconsolidation ratios, called the Hardening State Parameter - HASP model. ...
The Mean Stress as the Governing Parameter in the Implicit GPM Stress Integration of Modified Cam-Clay Model
(Information Technology in Geo-Engineering, 2010)
An implicit computational governing parameter method (GPM) for stress integration of the modified Cam-Clay model is presented in the paper. In the previous studies, the increment of the mean plastic strain d epsilon(p)(m) ...
Development of new composites made of waste materials for wood pallet element
(Springer International Publishing, 2017)
The recycling of waste products and its further use for new products is of the utmost importance nowadays. The quantities of waste product originating from industries involving plastics, paper, wood, textile and metal ...
Comparative Analysis of Alternative Solutions of Excavation for Section of Hydropower Tunnel HPP "Dabar"
(Springer Verlag, 2018)
The subject of this paper is a comparative analysis of the alternative solutions for the construction of the supply tunnel section of HPP "Dabar" from km 4 + 272.54 to km 12 + 125.0 with the application of TBM technology, ...