Pretraživanje
Prikaz rezultata 11-20 od 68
Design procedures for cold-formed stainless steel equal-leg angle columns
(Thin-Walled Structures, 2020)
Currently, there is still no explicit design approach for cold-formed stainless steel columns with equal-leg angle sections in Europe. A comprehensive numerical investigation, validated by the available experiments collected ...
Three-dimensional stress analysis and design of cross-laminated timber panels using full-layerwise-theory-based finite element method
(Elsevier, 2020)
Cross-laminated timber (CLT) panels have an increasing market share and extensive application in civil engineering, as full size walls or light floor structures. Due to their low environmental impact, excellent thermal ...
Column Curves for Stainless Steel Lipped–Channel Sections
(Journal of Structural Engineering, 2020)
The strength of thin-walled stainless steel columns has been investigated extensively over the last few years. The present paper presents the results of an extensive computational study of the buckling strength of ...
Experimental testing of decoupled masonry infills with steel anchors for out-of-plane support under combined in-plane and out-of-plane seismic loading
(Construction and Building Materials, 2022)
Because of simple construction process, high energy efficiency, significant fire resistance and excellent sound isolation, masonry infilled reinforced concrete (RC) frame structures are very popular in most of the countries ...
An efficient model for 3D analysis of steel frames exposed to fire
(Elsevier, 2024)
The paper presents a nonlinear concentrated plasticity frame element for advanced analysis of steel frames exposed to elevated temperatures. The element extends the formulation based on the generalized plasticity material ...
Comprehensive review of the structural behaviour and numerical modelling of recycled aggregate concrete-filled steel tubes
(Elsevier, 2024)
This paper summarises current research findings related to the behaviour and simulation of a relatively new type
of structural component: recycled aggregate concrete-filled steel tube columns (RACFST). The first part of ...
Shear resistance of headed shear studs welded on welded plates in composite floors
(Elsevier Ltd., 2019)
The present paper deals with composite steel-concrete floor with headed shear studs welded onto a flat steel plate. In bridges applications, which are the focus of the paper, very thick steel plates are often combined with ...
Behaviour of stainless steel plain channel section columns
(Thin-Walled Structures, 2020)
In this paper, the structural stability of cold-formed stainless steel plain channel columns under axial compression is investigated. Reliable finite element models for channel section columns are first ...
Unfavorable geometric imperfections in steel plate girders subjected to localized loads
(Elsevier, 2021)
Recent experimental studies have shown that the current EN1993-1-5 patch loading resistance model underestimates the ultimate strength of steel plate girders in certain cases, especially for longitudinally stiffened steel ...
Structural response to axial testing of cold-formed stainless steel angle columns
(Thin-Walled Structures, 2020)
In this paper, the structural stability and compressive capacity of pin-ended cold-formed stainless steel angle columns with different slenderness were experimentally investigated. The experimental programme was performed ...