Претраживање
Приказ резултата 31-40 од 68
An efficient model for 3D analysis of steel frames exposed to fire
(Elsevier, 2024)
The paper presents a nonlinear concentrated plasticity frame element for advanced analysis of steel frames exposed to elevated temperatures. The element extends the formulation based on the generalized plasticity material ...
Column Curves for Stainless Steel Lipped–Channel Sections
(Journal of Structural Engineering, 2020)
The strength of thin-walled stainless steel columns has been investigated extensively over the last few years. The present paper presents the results of an extensive computational study of the buckling strength of ...
Dynamic response of three-dimensional rigid and flexible foundations on layered soils with local inhomogeneities
(Elsevier, 2022)
The dynamic response of rigid and flexible three-dimensional (3D) foundations of arbitrary shape, placed on a homogeneous or layered halfspace, which may contain a finite, longitudinally invariant structure or inhomogeneity, ...
Experimental results of reinforced concrete frames with masonry infills with and without openings under combined quasi‑static in‑plane and out‑of‑plane seismic loading
(Bulletin of Earthquake Engineering, 2023)
Reinforced concrete (RC) frames with masonry infills can be encountered all over the world, especially in earthquake prone regions. Although masonry infills are usually not considered in the design process, in the case of ...
Ground Surface Subsidence Monitoring Using Sentinel-1 in the “Kostolac” Open Pit Coal Mine
(MDPI, 2023)
Open pit coal mining affects surrounding populated areas, resulting in terrain surface deformation. Surface deformation should be monitored as often as possible to control deformations and prevent potential incidents. This ...
Influence of inter-panel connections on vibration response of CLT floors due to pedestrian-induced loading
(Engineering Structures, 2023)
Long-span cross-laminated timber (CLT) floors are typically an assembly of prefabricated CLT panels connected together on the site. The actual connections are commonly neglected in design calculations. Hence, a CLT floor ...
RILEM interlaboratory study on the mechanical properties of asphalt mixtures modified with polyethylene waste
(Elsevier, 2022)
This research aims to determine if the observed improvements using polyethylene (PE) waste in asphalt binder translate into better performance at the asphalt mixture scale in the laboratory environment while overcoming the ...
Effect of rib-to-beam angle on the shear resistance of headed studs in composite slab
(Elsevier, 2024)
Headed stud shear connectors are commonly implemented in steel-concrete composite floors for connecting the concrete slab to the steel beam and providing composite action between those two elements. The orientation of ...
Quantifying tall structure tilting trend through TLS-based 3D parametric modelling
(Elsevier, 2022)
Geodetic monitoring of a tall structure means employing various methods of measurement and data processing for assessing its verticality. Terrestrial laser scanning (TLS) is a method of collecting lots of quality spatial ...
LES study on the urban wind energy resources above the roof of buildings in generic cluster arrangements: Impact of building position
(Elsevier, 2023)
Urbanisation brought an increasing prevalence of groups of high-rise buildings and raised new questions about their impact on local wind flow conditions and the wind energy harvesting potential. The focus of this study is ...