Pretraživanje
Prikaz rezultata 1-10 od 54
Image Processing for Hydraulic Jump Free-Surface Detection
(IAHR, 2019)
Hydraulic jumps exhibit a high degree of free-surface oscillations, triggered by intense turbulence and aeration.
These processes are difficult to model numerically and are frequently investigated on a scale model. ...
Experimental investigation of influence parameters on cartridge fired pin resistance
(Ernst & Sohn GmbH, 2023)
Cartridge fired pins, also known as powder actuated fasteners, have a wide application in different construction industry fields, mostly for joints of cold-formed structural elements and profiled steel sheeting, or for ...
Fiber optic sensor applications for structural health monitoring
(Zbornik radova / Treći srpski kongres o putevima, 2018)
The monitoring of civil and geotechnical structures requires a variety of different measurement tasks that require different types of sensing systems. Fiber optic sensors can be used in a variety of applications and many ...
Adverse-slope stilling basins: machine learning approach to estimation of hydraulic jump features
(SDHI/SDH, 2018)
Stilling basins are the most commonly used energy dissipating structure for large dams, due to their high operating reliability under a wide range of inflow conditions. However, unsatisfactory tailwater conditions, primarily ...
Fatigue Resistance of a Grid-Reinforced Asphalt Concrete using Four Point Bending Beam Test
(CRC Press/Balkema, 2019)
This paper presents an experimental study of the influence of a reinforcement system on fatigue resistance of asphalt concrete. For purpose of this research, unreinforced and grid-reinforced asphalt specimens were tested. ...
Vibration serviceability assessment of a stress-ribbon footbridge
(Department for Civil Engineering and Geodesy, Faculty of Technical Sciences, University of Novi sad, 2023)
With advancements in structural modelling and construction techniques, contemporary footbridges have become increasingly susceptible to vibrations induced by human activities, such as walking, jogging and jumping. This ...
Simplified design recommendations for beam-to-column joints according to Eurocode
(Eighth International Conference on ADVANCES IN STEEL STRUCTURES, 2015)
The design rules in EN 1993-1-8 (the Eurocode) for beam-to-column joints in steel frames with endplate are based on the component method. Generally, three different zones of the joint are considered: tension, shear and ...
Modularity of concave polyhedra of the second sort with octagonal bases
(Cham: Springer, 2019)
The aim of this research is to examine and outline modularity of the selected representatives of concave pol yhedra of the second sort (C II), from the point of view of their high combinatorial potential for creating diverse ...
Claim management according to PMI standard
(XX Internacionalni simpozijum iz projektnog menadžmenta ''Značaj projektnog menadžmenta prvih 30 godina YUPMA i 50 godina IPMA'', 2016)
S obzirom na to da je svaki građevinski projekat unikatan, često dolazi do neslaganja između ugovorenih i planiranih parametara realizacije posla. Takva situacija obično dovodi do nastanka odštetnog zahteva. Izuzetno je ...
Geometric Redesign of the Subdivided Surface of CC II: Application In Architecture
(Bucharest, Romania: SORGING–ROMANIAN SOCIETYFORENGINEERINGGRAPHICS, 2019)
The concave polyhedral surface of CC II can be used as a structural template for architectural design of domes, roofs or other covering or stand-alone structures. Subdivision of CC II faces in geometrically defined way can ...