Претраживање
Приказ резултата 21-30 од 68
RILEM interlaboratory study on the mechanical properties of asphalt mixtures modified with polyethylene waste
(Elsevier, 2022)
This research aims to determine if the observed improvements using polyethylene (PE) waste in asphalt binder translate into better performance at the asphalt mixture scale in the laboratory environment while overcoming the ...
Experimental results of reinforced concrete frames with masonry infills with and without openings under combined quasi‑static in‑plane and out‑of‑plane seismic loading
(Bulletin of Earthquake Engineering, 2023)
Reinforced concrete (RC) frames with masonry infills can be encountered all over the world, especially in earthquake prone regions. Although masonry infills are usually not considered in the design process, in the case of ...
An analytical approach based on Green's function to thermal response factors for composite planar structure with experimental validation
(Elsevier Masson SAS, 2019)
The unsteady heat conduction in composite planar structure, with arbitrary number of layers, using analytical approach based on Green's Functions (GF) is analyzed. The analytical solution for spatial and temporal temperature ...
An Evaluation of Image Velocimetry Techniques under Low Flow Conditions and High Seeding Densities Using Unmanned Aerial Systems
(MDPI, 2020)
Image velocimetry has proven to be a promising technique for monitoring river flows using remotely operated platforms such as Unmanned Aerial Systems (UAS). However, the application of various image velocimetry algorithms ...
LES study on the urban wind energy resources above the roof of buildings in generic cluster arrangements: Impact of building position
(Elsevier, 2023)
Urbanisation brought an increasing prevalence of groups of high-rise buildings and raised new questions about their impact on local wind flow conditions and the wind energy harvesting potential. The focus of this study is ...
Design procedures for cold-formed stainless steel built-up columns assembled from equal-leg angles
(Elsevier, 2023)
In this paper, the structural behaviour of cold-formed stainless steel (CFSS) built-up T- and cruciform-section columns is studied experimentally and numerically, and the effect of discrete fasteners on their flexural and ...
SSIMS-Flow: Image velocimetry workbench for open-channel flow rate estimation
(Elsevier, 2023)
Image-based hydrological measurement techniques have surged in popularity over the last decade, with the most common type of data obtained being the open-channel surface velocity field and flow rate. The lack of a feature-rich ...
Flat slab response for seismic and cyclic actions prediction with numerical models
(Engineering Structures, 2023)
As an outcome of a recent European research project, the modelling of the response of flat slab structures for seismic and cyclic loading was the object of a blind competition. No other blind tests are available in the ...
Dynamic stiffness – based free vibration study of open circular cylindrical shells
(Elsevier, 2020)
In this paper, the dynamic stiffness method has been applied in the free vibration analysis of open circular cylindrical shells based on Flügge thin shell theory. The dynamic stiffness matrix for a completely free open ...
Ground Surface Subsidence Monitoring Using Sentinel-1 in the “Kostolac” Open Pit Coal Mine
(MDPI, 2023)
Open pit coal mining affects surrounding populated areas, resulting in terrain surface deformation. Surface deformation should be monitored as often as possible to control deformations and prevent potential incidents. This ...