Pretraživanje
Prikaz rezultata 31-40 od 165
Bolted connectors with mechanical coupler embedded in concrete: Shear resistance under static load
(Techno Press, 2020)
Contemporary design and construction of steel-concrete composite structures employs the use of prefabricated concrete elements and demountable shear connectors in order to reduce the construction time and costs and enable ...
Absolute Time Series GNSS Point Positioning-Data Cleaning and Noise Characterization
(Strojarski fakultet u Slavonskom Brodu, 2020)
Time series data of GNSS point positioning are considerably used for the purpose of geophysical research. The velocity estimates and their uncertainties derive from time series data of GNSS point positioning affected by ...
Physical and mechanical properties of hemp fibre reinforced alkali-activated fly ash and fly ash/slag mortars
(Elsevier Ltd., 2020)
Two alkali-activated mortars with different solid prime materials were analysed. The first mortar contained fly ash, had lower density, higher water absorption, lower compactness, lower compressive strength, similar flexural ...
Structural response to axial testing of cold-formed stainless steel angle columns
(Thin-Walled Structures, 2020)
In this paper, the structural stability and compressive capacity of pin-ended cold-formed stainless steel angle columns with different slenderness were experimentally investigated. The experimental programme was performed ...
High temperature materials: properties, demands and applications
(Association of Chemical Engineers of Serbia, 2020)
High-temperature materials are used in a wide range of industries and applications such as gas turbine engines for aircrafts, power and nuclear power plants, different types of furnaces, including blast furnaces, some fuel ...
Influence of cracks on concrete carbonation resistance
(University of Montenegro Faculty of Civil Engineering, 2020)
In reinforced concrete (RC) structures carbonation induced corrosion is one of the biggest durability issue. There are many factors that affect carbonation process (CO2 concentration, relative humidity, temperature, curing ...
APPLICATION OF PBL MODEL ON STUDY PROGRAM OF GEODESY AT THE FACULTY OF ARCHITECTURE, CIVIL ENGINEERING AND GEODESY AT THE UNIVERSITY OF BANJALUKA
(Arhitektonsko-Gradjevinsko-Geodetski fakultet Unverziteta u Banjojluci, 2020)
The subject of this paper is the application of the PBL model in the teaching process of the first cycle of studies at the Faculty of Architecture, Civil Engineering and Geodesy. The meaning of the term PBL model and its ...
Column Curves for Stainless Steel Lipped–Channel Sections
(Journal of Structural Engineering, 2020)
The strength of thin-walled stainless steel columns has been investigated extensively over the last few years. The present paper presents the results of an extensive computational study of the buckling strength of ...
Comparison of wind actions according to Eurocode and previous regulations
(SS Cyril and Methodius Faculty of Civil Engineering, 2020)
European norms for civil engineering structures, well known as Eurocodes, are set of
highly harmonized codes regarding structural issues. Main rules and recommendations for
calculation of wind actions on structures are ...
Софтверско-хардверско решење за естимацију термалног импулсног одзива вишеслојног равног зида
(Univerzitet u Beogradu, Građevinski Fakultet, 2020)