Претраживање
Приказ резултата 31-40 од 342
A Preisach Model for Monotonic Tension Response of Structural Mild Steel with Damage
(Budapest University of Technology and Economics, 2020)
This paper presents the new type of Preisach model that describes the elastoplastic behavior of structural mild steel under axial monotonic tension load with damage. Newly developed model takes into account elastic region, ...
Unfavorable geometric imperfections in steel plate girders subjected to localized loads
(Elsevier, 2021)
Recent experimental studies have shown that the current EN1993-1-5 patch loading resistance model underestimates the ultimate strength of steel plate girders in certain cases, especially for longitudinally stiffened steel ...
Absolute Time Series GNSS Point Positioning-Data Cleaning and Noise Characterization
(Strojarski fakultet u Slavonskom Brodu, 2020)
Time series data of GNSS point positioning are considerably used for the purpose of geophysical research. The velocity estimates and their uncertainties derive from time series data of GNSS point positioning affected by ...
Three-dimensional stress analysis and design of cross-laminated timber panels using full-layerwise-theory-based finite element method
(Elsevier, 2020)
Cross-laminated timber (CLT) panels have an increasing market share and extensive application in civil engineering, as full size walls or light floor structures. Due to their low environmental impact, excellent thermal ...
Structural response to axial testing of cold-formed stainless steel angle columns
(Thin-Walled Structures, 2020)
In this paper, the structural stability and compressive capacity of pin-ended cold-formed stainless steel angle columns with different slenderness were experimentally investigated. The experimental programme was performed ...
Object-oriented framework for 3D bending and free vibration analysis of multilayer plates: Application to cross-laminated timber and soft-core sandwich panels
(Elsevier, 2021)
In the paper, the main steps involved in the development of an object-oriented computational framework for the 3D bending and free vibration analysis of multilayer plates are presented. The mathematical formulation for ...
Local behaviour of the connector with mechanical coupler and rebar anchor under tension load
(Society for Materials and Structures Testing of Serbia; Faculty of Civil Engineering, University of Belgrade, Serbia; Association of Structural Engineers of Serbia, 2023)
In the past few decades, demountable connectors have often been used for
connections in composite and mixed steel-concrete structures to reduce
construction time and costs. Furthermore, the application of demountable
connectors ...
Physical and mechanical properties of hemp fibre reinforced alkali-activated fly ash and fly ash/slag mortars
(Elsevier Ltd., 2020)
Two alkali-activated mortars with different solid prime materials were analysed. The first mortar contained fly ash, had lower density, higher water absorption, lower compactness, lower compressive strength, similar flexural ...
Recommendation of RILEM TC 264 RAP on the evaluation of asphalt recycling agents for hot mix asphalt
(Springer, 2022)
This recommendation is based on the results of an inter-laboratory study organised by the RILEM technical committee TC 264-RAP "Asphalt Pavement Recycling"—Task Group 3 (TG3) focusing on Asphalt Binder for Recycled Asphalt ...
Bridge damage: Detection, IFC-based semantic enrichment and visualization
(Elsevier, 2020)
Building Information Modeling (BIM) representations of bridges enriched by inspection data will add tremendous value to future Bridge Management Systems (BMSs). This paper presents an approach for point cloud-based detection ...