Претраживање
Приказ резултата 101-106 од 106
Solid Modeling and Motion Study of Chronometer Detent Escapement Mechanism
(Iasi: "Gheorghe Asachi" Technical University of Iasi, 2011)
Theory of clock, watch and chronometer escapements is important
and interesting part of theory of mechanisms and kinematics. Despite the fact that chronometer escapements are invented in past times, from the viewpoint of ...
Experimental and numerical modelling comparison of thermal performance of expanded polystyrene and corrugated plastic packaging for fresh fish
(Elsevier, 2011)
Experiments were carried out to compare the thermal performance of wholesale fresh fish boxes made of corrugated plastic (CP) and expanded polystyrene (EPS). Free standing boxes containing whole, fresh fillets were exposed ...
Suitability Analysis of Hugelschaffer's Egg Curve Application in Architectural Structures’ Geometry
(Iasi: The Gheorghe Asachi Technical University of Iasi, 2011)
Researching the different types of plane curves with ovoid shape, it has been shown that there are some forms of egg-curves that may be useful for design in engineering, especially in architecture. Increase of energy ...
Landslide susceptibility assessment using SVM machine learning algorithm
(Engineering Geology, 2011)
This paper introduces the current machine learning approach to solving spatial modeling problems in the domain of landslide susceptibility assessment. The latter is introduced as a classification problem, having multiple ...
Wheel/rail noise control / Kontrola buke u dodiru točka i šine
(Naučno-stručno društvo za zaštitu životne sredine Srbije - Ecologica, Beograd, 2011)
This paper analyzes the relation between wheel and rail induced noise regarding the reduction in the total noise emission. Priorities are defined for reduction of noise emission from wheel and rail. It is also pointed out ...
Geometrically Nonlinear Analysis of Composite Plates Using Layerwise Displacement Model
(Faculty of Engineering, University of Porto, Portugal, 2011)
The low mass density and the high tensile strength, usually expressed through the specific modulus of elasticity and the specific strength, have made composite materials lighter and stronger compared with most traditional ...